Shark Navigator LIFT-AWAY ZERO-M ZU571 Series User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
AVacuum Pod
BMotorized Floor Nozzle
CHandle & Hose
DWand
EDouble Accessory Holder
F12” Crevice Tool
GUpholstery Tool
WHAT’S INSIDE 2 WAYS TO CLEAN
ZU571_QSG_MP_Mv9
QUICK START GUIDE
F G
LIFT-AWAY
®
ZERO-M
®
1. Insert double accessory holder into the side
of the pod above the Lift-Away button.
2. Place pod onto floor nozzle post.
3. Insert wand into pod.
4. Insert handle into wand.
5. Attach hose clip to wand.
6. Connect hose to back of pod.
NOTE: For proper operation, ensure
all parts are firmly CLICKED into place.
2
(Click)
1
(Click)
3
(Click)
4
(Click)
5
(Click)
6
(Click)
A
B
C
D
E
Attach
your
desired
accessories
UPRIGHT
Power/Surface switch
Press switch to select
surface setting or to turn
o power. To engage
brushroll, step on floor
nozzle and tilt handle back.
Suction Control
Slide to MIN to increase
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.
LIFT-AWAY®
Lift-Away Release
Handle Release
Press release
buttons to lift pod
o nozzle, or to
release handle or
wand.
Wand Release
Attach accessories
to handle or wand.
For additional parts
and accessories, visit
sharkaccessories.com

For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
©2019 SharkNinja Operating LLC.
TIPS
EMPTYING THE DUST CUP
clean
For quick cord access,
rotate upper hook down
and remove cord.
Move cord hook to
upright position to
secure cord in place.
To store your vacuum,
wrap cord around upper
and lower hooks.
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor
filters every 3
months, and HEPA
filter once a
year.
Rinse with water
only, and allow to
air-dry completely
before reinstalling.
See enclosed Owner’s
Guide for more
information on
how to clean and
replace the filters.
Using a coin, turn locks counterclockwise to open, then lift o cover to access brushroll.
Clear blockages from airway.
Replace cover, pressing down firmly on all sides before turning locks clockwise to close.
Zero-M® Self-Cleaning Brushroll
The Shark® Zero-M® self-cleaning brushroll delivers nonstop hair removal. Check for blockages or objects
stuck in the brushroll.
CHECKING FOR BLOCKAGES
If any hair is wrapped around brushroll, extending cleaning time will help it clear.
Brushroll access
Unlock Open Cover Clear Airway