Shark NV355 Series User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A Handle with Stretch Hose
B Floor Nozzle
C Extension Wand
D Accessory Holder
E Portable Lift-Away® Canister
WHAT’S INSIDE MAINTENANCE
NV355_QSG_REV_Mv3
A
B
C
QUICK START GUIDE
H
D
E
F
F 8" Crevice Tool
G Dusting Brush
H Wide Upholstery tool
G
Empty dust cup after each use
Press top
Dust Cup Release
latch to access
dust screen and
remove built-up
debris asrequired.
Pull up on
Dust Cup
Release latch
and lift dust cup
o canister.
Hold Dust Cup over
a trash bin and press
the empty-release
latch on the bottom.
Remove any string,
carpet fibers, or hair
that may be wrapped
around the brushroll.
Detach the motorized
nozzle from the portable
Lift-Away canister.
Pre-Motor (foam and felt):
With the dust cup removed, take out and rinse the
foam and felt filters with water only.
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill and pull
the Filter Access latch to remove the grill. Remove and
rinse the HEPA filter with water only. Let all filters air-dry
completely before reinstalling.
TIP:
Wash filters every
3 months to keep
the suction strong.
Rinse filters and allow
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Easy brushroll maintenance
Cleaning Filters
Post-Motor
Pre-Motor
1
(Click)
2
(Click)
3
(Click)
4
(Click)
Insert canister into
motorized floor nozzle.
Connect handle to the wand,
pressing until it clicks into place.
Connect hose to the back of the
canister pressing until it clicks
into place.
Insert wand into the
canister.
LIFT-AWAY ®PRO

VERSATILE FLOOR-TO-CEILING CLEANING
@sharkcleaning
1Plug In Vacuum
Then place your foot
gently on the floor nozzle
and tilt the handle back.
1Plug In Vacuum
Press Lift-Away button to lift
canister o floor nozzle. You
are now ready to clean those
hard-to-reach places.
FLOOR CLEANING
2Attach desired cleaning accessory.
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
©2018 LIFT-AWAY and SHARK are registered trademarks of SharkNinja Operating LLC.
NAVIGATOR is a trademark of SharkNinja Operating LLC
PORTABLE LIFT-AWAY®MODE
To clean above-floor
areas with the handle,
detach it from the
wand by pressing the
Handle button.
To clean with
a longer reach,
detach the
wand from the
floor nozzle by
pressing the
Wand Release
button.
Handle
Wand
Release
Attach any of the
specialized cleaning
accessories to the
handle or wand.
= Carpet Cleaning
= Bare /Above Floor
= OFF
BRUSHROLL ON/OFF:
1Press the ON/OFF switch at
the top of the canister to the I
position to vacuum bare floors
(straight suction only) or use
Lift-Away®mode. To vacuum
carpets and rugs, set the switch
to the II position to engage the
motorized brushroll.
2Press the floor nozzle down with
your foot and tilt the handle
back towards you to engage the
brushroll.
2Choose Setting
Slide the power switch to the appropriate
floor setting and start cleaning.
SUCTION CONTROL
Adjust the suction by
rotating the suction release
collar on the handle
counterclockwise to reduce
the suction or clockwise to
increase suction.