Shark Rotator Powered Lift-Away ZU621 User manual

CLEANER HEAD
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
AVacuum Pod
BMotorized Floor Nozzle
CHandle & Hose
DWand
EPet Multi Tool
FPet Power Brush
GDuster Crevice Tool
WHAT’S INSIDE TIPS
MAINTENANCE
ZU621_QSG_MP_Mv1
QUICK START GUIDE
Empty the dust cup after each use.
TIP:
Rinse foam and felt
filters every 3 months,
and HEPA filter every
year.
Rinse filters with water
only and allow them
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Note: The foam filter
may discolor over time.
This is normal.
POWEREDPOWERED
LIF T-AWAY
®
SPEED
A
D
C
E F
G
Slide hose clip
into back of wand
for convenience.
To store your vacuum, wrap
cord around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
For additional parts and accessories,
visit sharkaccessories.com
Attach onboard
accessories
(Connect)
OR
Locks
(Click)
(Click)
(Click)
B
(Click)
with Self-Cleaning Brushroll
Using a coin, turn locks
counterclockwise to
open, then lift o cover
to access brushroll.
Replace cover,
pressing down
firmly on all sides
before turning locks
clockwise to close.
Clear blockages
from airway.
Self-Cleaning Brushroll
The self-cleaning brushroll automatically
removes hair wrap. If some hair or debris
remains after continued use, remove the
cover to access the brushroll.

2 WAYS TO CLEAN
UPRIGHT
LIFT-AWAY®
Floor Setting
Slide the Floor Selector up or
down to choose floor type.
Lift-Away
Release
Press release
button to lift
pod o nozzle.
OR
Handle
Release
Wand
Release
Attach accessories
to handle or wand.
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
© 2019 SharkNinja Operating LLC.
Suction Control
Slide to MIN to increase
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.
Power
Push the Power button to
turn the vacuum on or o.
Wand Release