Sharndy ETW29P User manual

SHARNDY
HEATED TOWEL RAILS
ETW29P
ELECTRICAL INSTALLATION
This appliance MUST be installed in accordance with the relevant wiring rules and regulations and in
particular those regulations which cover installation of appliances and accessories in damp situations such
as bathrooms, showers, laundries and other areas with fixed water containers. It is to be fitted in
accordance with local standards .
In accordance with local standards this appliance is required to be connected to a power supply that
includes an earth circuit.
This appliance cannot be connected to a two wire (lighting) power circuit.
Special purpose tools are required for the replacement of the power supply cord and element. Contact an
Authorised Service Agent for service.
Remarks:
.This appliance is not suitable for person with defect in physical, senses, intelligence or person lack of
experience (include the children), except when they are supervised by their guardians or with right
guidance before using the appliance.
.Do not operate this appliance with a damaged cord, plug, or after the appliance malfunctions or has been
dropped or damaged in any manner. Return to a qualified electrical person for examination, electrical
service and repair.
3.Pack silicon rubber with hook, fold the press buckle then screw M3*10.
4.Open anti-off ring, hanger the electric towel warmer on fixed rod then buckle up.
OPERATING INSTRUCTION
1
4
Email:[e-mail]
Website:www.sharndy.com
Warranty:1 year limited warranty.

SAFETY INFORMATION
When using any electrical appliance, basic safety precautions should always be observed.
READ THESE INSTRUCTIONS CAREFULLY. Keep them handy for future reference.
.This appliance is intended to warm and dry towels and therefore is hot to the touch.When used by or near
young children or infirm persons,close supervision is necessary.Young children should be supervised to
ensure that they do not play with the appliance.
.Any rise in ambient temperature is directly reflected in the appliance, and as a result of this, the appliance
will feel hotter to the touch during warmer periods. Also the insulation effect of towels will cause the
operating temperature to increases lightly.
.The appliance is to be installed so that switches and other controls can not be touched by a person in the
bath or shower.
.Do NOT use this appliance for any purpose other than its intended use.
.To avoid a hazard this heated towel rail MUST NOT be used to carry towels or any other articles that
have been in contact with oil, petroleum based products or dry cleaning fluids.
.Use this appliance only with the voltage specified on the rating label, or elsewhere in these instructions.
.Regulations require that electrical work be carried out only by authorised persons.
.DO NOT immerse in any liquid.
.For service contact your nearest Authorised Service Agent.
SPECIFICATIONS
DIMENSIONS
Model: ETW29P
Height: 450mm
Width: 550mm
Depth: 95mm
ELECTRICAL
Wattage: 65W
Power supply :120V, 60Hz
CARE AND CLEANING
The Heated Towel Rail is wiped down from time to time with a damp cloth.
DO NOT USE ANY ABRASIVE OR CORROSIVE CLEANERS.
INSTALLATION for WALL MOUNTED DESIGN
1.Four plastic bracket insert into vertical tube as direction of arrow.
2.Mark the position on the wall, we recommend the min installation height is not lower than 1305mm.
3.Drill four holes on the marks, insert expansion into the hole and fix the bushes on it.
4.Match the towel warmer onto bushes
5.Screw the grub screw into the hole of bracket
INSTALLTION for HOOK DESIGN
1.Back- out the screw M3*10, open pressing buckle and take out the silicon rubber.
2.Pack two ends of the first heating bars with silicon rubber.
2 3