Sharp Aquos LC-20S5U User manual
SHAR~
LC-20S5U
LIQUID CRYSTAL TELEVISION
TELEVISEUR
ACL
TELEVISOR CON PANTALLA DE
CRISTAL LiQUIDO
TELEVISOR
DE
CRISTAL LiQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERA<;Ao
AQUOS
ENIlAJlCED
DEFINITION TELEVISION
L=OT~
~
MONITOR
NOM
1245
tft
Products that have earned the ENERGY
STAR®
are designed to protect the environment
through superior energy efficiency.
Les produits agrees ENERGY
STAR®
sont con9us pour proteger I'environnement par un
rendement energetique superieur.
LC-20S5U
OPERATION MANUAL
ENGLISH
IMPORTANT:
To
aid reporting in case
of
loss
or
theft, please record the
TV's
model and serial numbers in
the
space provided. The numbers
are located at the rear
of
the TV.
IMPORTANT INFORMATION
IModel No.:
Senal
No.:
WARNING:
TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT
TO
RAIN OR MOISTURE.
The lightning flash with arrow-head symbol,
within
an
equilateral triangle, is intended
to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be
of
sufficient magnitude
to
constitute arisk of electric shock
to
persons.
CAUTION:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK,
DO
NOT
REMOVE
COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within atriangle is
intended to alert the user
to
the presence
of
important operating and maintenance
(servicing) instructions
in
the literature
accompanying the product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS
PRODUCT
ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET,
OR
TABLE.
THE
PRODUCT
MAY
FALL CAUSING
SERIOUS
PERSONAL
INJURY
AND
SERIOUS
DAMAGE
TO THE PRODUCT. USE ONLY WITH ACART, STAND, TRIPOD, BRACKET,
OR
TABLE
RECOMMENDED
BY
THE
MANUFACTURER
OR
SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT
AND
USE MOUNTING
ACCESSORIES
RECOMMENDED
BY
THE
MANUFACTURER.
A
PRODUCT
AND
CART
COMBINATION SHOULD BE MOVED WITH CARE.
QUICK
STOPS, EXCESSIVE FORCE,
AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT
AND
CART
COMBINATION TO OVERTURN.
WARNING:
FCC Regulations state that any unauthorized changes
or
modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment. IU.S.A. ONLYI
"Note
to
CATV
system
installer: This reminder
is
provided
to
call
the
CATV
system
installer's attention
to
Article 820-40 of
the
National
Electrical Code that provides guidelines for proper grounding
and,
in
particular, specifies that
the
cable
ground
shall
be
connected
to
the
grounding
system
of
the
building,
as
close
to
the
point
of
cable
entry
as
practical." IU.S.A. ONLYI
This product utilizes tin-lead solder, and fluorescent lamp containing asmall amount
of
mercury. Disposal
of
these materials
may be regulated due to environmental considerations. For disposal
or
recycling information, please contact your local
authorities
or
the Electronic Industries Alliance: www.eia.org
@1
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television.
To
ensure safety and many years
of
trouble-free operation of your product, please read the Important Safety Precautions carefully
before using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result
in
electric shock and/or fire.
In
order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product.
To
ensure your safety and prolong the service life
of
your LCD color
TV
product, please read the following precautions carefully before using the product.
•Read
instructions-All
operating instructions must be read and understood before the product is operated.
•Keep this manual
in
asafe
place-These
safety and operating instructions must be kept
in
asafe place for future
reference.
•Observe
warnings-All
warnings
on
the product and
in
the instructions must be observed closely.
•Follow
instructions-All
operating instructions must be followed.
•
Attachments-Do
not use attachments not recommended by the manufacturer. Use
of
inadequate attachments
can result
in
accidents.
•Power
source-This
product must operate on apower source specified on the specification label. If you are
not sure
of
the type
of
power supply used
in
your home, consult your dealer
or
local power company. For units
designed to operate on batteries or another power source, refer to the operating instructions.
•AC cord
protection-The
AC cord must be routed properly to prevent people from stepping on it
or
objects from
resting on it. Check the cord at the plugs and product.
•
Overloading-Do
not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
•Entering
of
objects and
liquids-Never
insert an object into the product through vents
or
openings. High voltage
flows
in
the product, and inserting
an
object can cause electric shock and/or short internal parts. For the same
reason, do not spill water
or
liquid
on
the product.
•
Servicing-Do
not attempt to service the product yourself. Removing covers can expose you to high voltage and
other dangerous conditions. Request aqualified service person to perform servicing.
•
Repair-If
any
of
the following conditions occurs, unplug the AC cord from the AC outlet, and request aqualified
service person to perform repairs.
a.
When the AC cord or plug is damaged.
b.
When aliquid was spilled on the product
or
when objects have fallen into the product.
c.
When the product has been exposed to rain
or
water.
d.
When the product does not operate properly as described
in
the operating instructions.
Do not touch the controls other than those described
in
the operating instructions. Improper adjustment
of
controls not described
in
the instructions can cause damage, which often requires extensive adjustment work
by aqualified technician.
e.
When the product has been dropped or damaged.
f.
When the product displays
an
abnormal condition. Any noticeable abnormality
in
the product indicates that the
product needs servicing.
•Replacement
parts-In
case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer,
or
those with the same characteristics and performance as the
original parts. Use
of
unauthorized parts can result
in
fire, electric shock and/or other danger.
•Safety
checks-Upon
completion
of
service or repair work, request the service technician to perform safety
checks to ensure that the product is
in
proper operating condition.
•Wall
or
ceiling
mounting-When
mounting the product on awall
or
ceiling, be sure to install the product
according to the method recommended by the manufacturer.
•
Polarization-This
AC cord may be equipped with apolarized alternating current line plug
(a
plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is asafety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose
of
the polarized plug.
2@
IMPORTANT SAFETY PRECAUTIONS (Continued)
•
Cleaning-Unplug
the AC cord from the AC outlet before cleaning the product.
Use adamp cloth to clean the product. Do not use liquid cleaners or aerosol
cleaners.
•Water and
moisture-Do
not use the product near water, such as bathtub,
washbasin, kitchen sink and laundry tub, swimming pool and
in
awet basement.
•
Stand-Do
not place the product
on
an
unstable cart, stand, tripod
or
table.
Placing the product
on
an unstable base can cause the product to fall, resulting
in
serious personal injuries
as
well
as
damage to the product. Use only a
cart, stand, tripod, bracket or table recommended by the manufacturer or sold
with the product. When mounting the product on awall, be sure to follow the
manufacturer's instructions. Use only the mounting hardware recommended by
the manufacturer.
•When relocating the product placed
on
acart, it must be moved with utmost
care. Sudden stops, excessive force and uneven floor surface can cause the
product to fall from the cart.
•
Ventilation-The
vents and other openings
in
the cabinet are designed for
ventilation. Do not cover
or
block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life
of
the product. Do not
place the product on abed, sofa, rug or other similar surface, since they can
block ventilation openings. This product
is
not designed for built-in installation; do
not place the product
in
an enclosed place such as abookcase or rack, unless
proper ventilation is provided or the manufacturer's instructions are followed.
•The Liquid Crystal panel used
in
this product
is
made
of
glass. Therefore, it can
break when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces
in
case the Liquid Crystal panel breaks.
•Heat
sources-Keep
the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
•The Liquid Crystal panel is avery high technology product with 921,600 thin film transistors, giving you fine picture
details.
Occasionally, afew non-active pixels may appear
on
the screen as afixed point
of
blue, green or red.
Please note that this does not affect the performance
of
your product.
@3
IMPORTANT SAFETY PRECAUTIONS (Continued)
•If an outside antenna
is
connected to the television equipment,
be
sure the antenna system is grounded so as to
provide some protection against voltage surges and built-up static charges. Section 810
of
the National Electrical
Code provides information with respect to proper grounding
of
the mast and supporting structure, grounding
of
the lead-in wire to an antenna discharge unit, size
of
grounding conductors, location
of
antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS
PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD-IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
":"~
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC-NATIONAL
ELECTRICAL CODE (NEC ART 250, PART H)
•Lightning -For added protection for this television equipment during alightning
storm, or when it
is
left unattended and unused for along period
of
time, unplug
it from the wall outlet and disconnect the antenna. This will prevent damage to
the equipment due to lightning and power-line surges.
•Power Lines -An outside antenna system should not be located
in
the vicinity
of
overhead power lines or other electric light or power circuits, or where it can
fall into such power lines
or
circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
~
===~
•
To
prevent fire, never place any type
of
candle or flames
on
the top or near the
~
TV
set. I?/
/;1
~
~
•
To
prevent fire or shock hazard, do not expose this product to dripping
or
splashing. No objects filled with liquids, such as vases, should be placed
on
the
product.
•
To
prevent fire or shock hazard, do not place the AC cord under the
TV
set or
other heavy items.
•Do not display astill picture for along time, as this could cause
an
afterimage to remain.
Install the product
on
the place where the AC cord can be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear
of
the product.
4@
Contents
IMPORTANT INFORMATION 1
DEAR SHARP CUSTOMER 2
IMPORTANT SAFETY PRECAUTIONS 2
Supplied
Accessories
5
Before
Using
the
LCD TV Set 6
Preparation
7
Installing Batteries
in
the Remote ControL 7
Using the Remote ControL 7
Antenna Connection 8
Power Connection 9
Part
Names
of
the
Main
Unit
10
Listening with Headphones
10
How to Fix the Cables
11
Part
Names
of
the
Remote
Control
12
TV
Signals
in Your Region
12
Connecting
External Devices 13
Outputting Video and Audio (Video Output)
13
EZ SETUP (With AUTO CLOCK
Setting)
14
EZ SETUP during the First Power On
14
Setting
the
CLOCK 15
AUTO CLOCK Setting
15
MANUAL CLOCK Setting
15
TIME DiSPLAy
16
Basic
Operation
16
Turning On and
Off
the Main Power.
16
Standby
16
Switching the Input Modes
(INPUT1I1NPUT2I1NPUT3/TV)
17
Sound Volume
17
Changing Channels
18
Selecting Menu Items
18
Supplied
Accessories
Basic
Adjustment
Settings
20
AV MODE 20
OPC 20
BACKLIGHT
21
PICTURE Adjustments
21
COLOR TEMPERATURE 22
lIP SETTING 22
NOISE CLEAN 22
FILM MODE 23
AUDIO Adjustments 23
Useful Features 24
CH
SETUP 24
SETUP 25
V-CHIP Settings 26
CLOSED CAPTION 30
VIEW MODE
31
AUDIO ONLY
32
BLUE SCREEN
32
SLEEP TIMER 33
WAKE-UP TIMER 33
NO SIGNAL OFF 34
NO OPERATION OFF 34
PICTURE FLIP 34
Troubleshooting
35
Specifications
36
Calling
for
Service
37
LIMITED WARRANTY
37
Dimensional
Drawings
•The dimensional drawings for the LCD
TV
set are
shown on the inside back cover.
Make sure the following accessories are provided with the LCD
TV
set.
pages
7
and
12
page
7
page
11
page
9
AQUOS
~
INOTE >
•The AC cord enclosed
in
this product is for 110-125V. For using it on the 125-240V AC, please consult the following.
SHARP
ELECTRONICS CORPORATION 6100
Blue
Lagoon
Drive,
Suite
230,
Miami,
Florida
33126, U.S.A.
@5
Before
Using
the
LCD
TV
Set
INPUT3/0UTPUT Terminal
Terminal for INPUT/OUTPUT connection.
INPUT2 Terminal
Terminal for S-video connection.
INPUT1 Terminal (COMPONENT)
Terminal for component connection.
Connect the AC cord to the AC INPUT terminal
of
the LCD
TV
set and plug
in
the AC cord to the wall outlet.
(See page 9.)
Start EZ SETUP. (See page 14.)
•The broadcasting channels and clock will
be
memorized automatically.
Turn
on
the main power. (See page 16.)
CD
Press POWER
on
the upper side
of
the main unit.
®The POWER/WAKE UP TIMER indicator located on the front
of
the main unit changes from red to green.
Connect with external devices. (See page 13.)
Connect the antenna cable. (See page 8.)
Open the terminal cover. (See page 8.)
•Pull down the hook located on the upper side
of
terminal cover to open the cover.
Insert two "AAA" size batteries into the remote control. (See page
7.)
•Open the battery cover, and then insert batteries with their terminals corresponding to the (+) and (-) indications
in
the
battery compartment.
To
use your LCD
TV
set, perform steps below.
Check the supplied accessories. (See page 5.)
6@
Preparation
Before using the LCD
TV
set for the first time, install the two "AAA" size batteries supplied
in
the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new "AAA" size batteries.
1Open the battery cover.
•Slide the cover while
pressing the (
~
)
part.
2Insert two "AAA" size batteries.
•Place batteries with their
terminals corresponding
to the
(+)
and
(-)
indications
in
the battery
compartment.
3Close the battery cover.
•Engaging the lower
claw with the remote
control, close the cover.
Precautions regarding batteries
•Improper use of batteries can result
in
aleakage
of
chemicals and/or explosion.
Be
sure to follow the instructions below.
Place batteries with their terminals corresponding to the (+) and
(-)
indications.
Different types
of
batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life
of
new batteries and/or cause old
batteries to leak chemicals.
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause arash. If chemical
leakage
is
found, wipe it
off
with acloth.
The batteries supplied with the LCD
TV
set may have ashorter operating time due to storage conditions.
If the remote control is not to be used for along period of time, remove the batteries from the remote control.
•Use the remote control by pointing it towards the remote sensor
window
of
the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Cautions regarding use
of
the remote control
•Do not apply shock to the remote control.
In
addition, do not
expose the remote control to liquids, and do not place it
in
an
area
with high humidity.
•Do not install or place the remote control
in
direct sunlight. The
heat may cause deformation of the unit.
•The remote control may not work properly if the remote sensor
window is
in
direct sunlight
or
strong lighting.
In
such acase,
change the angle
of
the lighting or main unit, or operate the
remote control closer to the remote sensor window.
Remote
sensor
@7
Preparation (Continued)
•The antenna requirements for good color television reception are more important than those for black &white television
reception. For this reason, agood quality outdoor antenna
is
strongly recommended.
The following is abrief explanation
of
the type
of
connections that are provided with the various antenna systems.
1.
A75-ohm system is generally around cable with F-type connector that
can easily be attached to aterminal without tools (not supplied).
2.
A300-ohm system
is
aflat "twin-lead" cable that can be attached to a
75-ohm terminal through a300/75-ohm adapter (not supplied).
OUTDOOR ANTENNA CONNECTION
+F-type connector
---d
75-ohm coaxial cable (round)
::d:
::
300-ohm twin-lead cable (flat)
•Use one of the following two diagrams if you connect
an
outdoor antenna.
A: Using aVHF/UHF combination outdoor antenna
B:
Using separate VHF and/or UHF outdoor antennas
•Connect the outdoor antenna cable lead-in to ANT (Antenna terminal)
on
the rear of the main unit.
VHF/UHF
antenna
A.
Combination VHF/UHF antenna VHF/UHF
antenna
300/75-OhmJ
adapter
(not supplied) .
,/
l
or-~
..
::1
300-ohm
twin-lead
75-ohm
coaxial cable
B.
Separate VHF and/or UHF antennas
VHF UHF
antenna antenna
1:r~i~:?~~
~
Combiner
30.0-ohm
(not
supplied)
tWin-lead I
~
~~~~=-IN
OUT~
or 75-ohm /
l
coa~ial
cab:
Pull down the hook
to open the cover.
F-type connector should be finger-tightened only.
When connecting the RF cable to the LCD
TV
set, do not tighten F-type connector
with tools.
If tools are used, it may cause damage to your LCD
TV
set.
(breaking
of
internal circuit, etc.)
8@
Preparation (Continued)
ED_--
Cable
TV
line
CABLE
TV
(CATV) CONNECTION
• A 75-ohm coaxial cable connector
is
built into the LCD
TV
set for easy hookup. When connecting the 75-ohm coaxial
cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal.
•Some cable
TV
companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, acable
TV
converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing
of
the scrambled channels. (Set your TV to channel 3
or
4,
typically one of these channels
is
used. If this is unknown, consult your cable
TV
company.) For more specific
instructions on installing cable TV, consult your cable
TV
company. One possible method
of
utilizing the converter/
descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
"A"
position
on
the
RF
switch (not supplied): You can view all unscrambled channels by using the TV's channel keys.
"B" position
on
the RF switch (not supplied):
You
can view the scrambled channels via the converter/descrambler by
using the converter's channel keys.
RF switch (not supplied) Two-set
ALB}-------
••
signal
"
__
".IlilloUT~
IN
splitter
B(not
supplied)
INOTE >
•
Consult
your
SHARP
Dealer
or
Service Center for the
type
of
splitter, RF switch
or
combiner
that might be required.
AC INPUT terminal
(AC 110-240 V)
Wall outlet
INOTE >
•Use acommercially available AC plug adapter,
if
necessary, depending on the design
of
the wall outlet.
•Unplug the AC cord from the LCD
TV
set and wall outlet when LCD
TV
set is not to be used
for
along period
of
time.
@9
Part Names
of
the
Main
Unit
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
To
change the vertical angle
of
the LCD
TV
set, tilt the screen up to 2.5 degrees forward
or
10
degrees backward. Please adjust
the angle so that the LCD
TV
set can be
watched most comfortably.
TTT~~G~~~I~I~lu-
Headphone
jack
(0)
Plug the headphone mini-plug into the headphone jack located
on
the front ofthe main unit.
lloo-
OPC (Optical
Picture
Control)
indicator
The OPC indicator lights up green when "OPC" is set to "ON".
(See page 20.)
Il..-......
__
POWERIWAKE UP TIMER
indicator
POWER/WAKE UP TIMER indicator lights up green when the power is on,
and
red
when
in
the standby mode (the indicator will not light when the main
power is off), and orange when the wake up timer is set (the indicator will
light when
in
the standby mode).
OPC
(Optical
Picture
Control)
sensor
Remote
sensor
INOTE >
•INPUT,
CH
(V)/(A),
VOL
(-)/(+)
and MENU on the main unit have the
same
functions as the
same
buttons on the remote control.
Fundamentally, this operation manual provides adescription based on operation using the remote control.
•Plug the headphone mini-plug into the headphone jack located on the front
of
the main unit.
.....
~
...
~.~~~
...
~w
..
_:
HeadPhon,
es
............................
............................
\
'Y
On-screen
display
VOLUME
10
1111111111·············································
Adjust the sound volume using VOL
(+)/(-)
on the
remote control.
INOTE >
•
Headphones
are not included
in
the supplied accessories.
•No sound is heard from the main unit speakers when aheadphone mini-plug is connected into the headphone jack.
•Do not
set
the volume at ahigh level. Hearing experts advise against extended listening at high volume levels.
10 @
Part Names of the Main Unit (Continued)
Terminals
Carrying handle
ACINPUT
terminal
Round lock for
Kensington Security
Standard slot*
*Using the Kensington Lock
•This LCD TV set has aKensington Security
Standard slot for use with aKensington
MicroSaver Security System. Refer
to
the
information that came with the system for
instructions
on
how to use it to secure the
LCD TV set.
~~~PB
,:.·f.:··::··:
•.
:
·.··L:·.··.·::~I
~~~-
PR
...........
<:~=
__
~~
AUDIO (L)
INPUT1
(COMPONENT)
INPUT2
Secure cables and cords with the supplied cable clamp so that they do not get caught when mounting the cover.
®
11
Part
Names
of
the
Remote
Control
BACKLIGHT
(P.
21)
Adjusts the brightness
of
the screen.
CC
(P.
30)
Displays Closed Caption subtitles.
MENU
(P.
18)
Displays the menu screen.
FLASHBACK
(P.
18)
Returns to the previous channel.
DISPLAY
(P.
16)
Displays the receiving channel and
the current time for 10 seconds.
./
.../...
/~
(Cursor
control)
(P. 18)
Selects adesired item
on
the screen.
CH
(A)/(V)
(P.
18)
Selects achannel.
INPUT
(P.
17)
Switches the input source between
INPUT1, INPUT2, INPUT3 and TV
mode.
~~---ENTER
Executes acommand.
VOL
(+)/(-)
(P.
17)
Sets the volume.
MTS
(P.
17)
--~~
Selects audio settings.
l:..w..ww.~...;..l.s.;;~~~.;;.;;,;;;,;;;;;,;;;,;;.,
MUTE
(P.
17)
Mutes the sound.
SLEEP
(P.
33)
Sets the sleep timer.
Channel
Select (P.18)
--~~~
Sets the channel.
VIEW MODE
(P.
31)
Selects the screen size.
AV MODE
(P.
20)
Selects preferred
AV
MODE.
MENU RETURN
(P.
18)
Returns to the previous screen.
AUDIO ONLY
(P.
32)
Outputs audio without screen image.
TV
Signals
in Your Region
This product is factory set to comply with the
TV
broadcasting system
in
the United States. For Brazil, Argentina and Uruguay,
set the color system according to the country before using this product by following the table below.
The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set.
/Factory setting
of
color system User setting
Country
TV
broadcasting
system
TV
Video
TV
U.S.A. Color: NTSC NTSC (N358) World Multi Not required or
N/A
TV
ch: US ch
US
ch
Auto System
Canada, Mexico, Color: NTSC NTSC (N358) World Multi Not required
or
N/A
Latin America
TV
ch: US
ch
US
ch
Auto System
Brazil Color: PAL-M NTSC (N358) World Multi Set color system to
TV
ch: US
ch
US
ch
Auto System PAL-M (see page 25)
Argentina, Color: PAL-N NTSC (N358) World Multi Set color system to
\.
Uruguay
TV
ch: US
ch
US
ch
Auto System PAL-N (see page 25)
~
The World Multi Auto System
is compatible with all color
systems indicated below.
Q)
N358
(g)
N443
(1)
PAL
(4)
PAL-M
®PAL-N
®SECAM
Q)
PAL-60
INOTE >
The 3Dimensional Y/C separation circuit* works only
in
the following cases:
•the color system is set to N358
in
TV
mode or Video mode
•the color system is set to AUTO (N358 signal
is
received)
in
Video mode
*The 3Dimensional Y/C separation circuit is used to remove flickering and color bleeding.
*The 3Dimensional Y/C separation circuit does not function when S-VIDEO signals are input.
12 @
Connecting
with
External Devices
You can enjoy picture and sound by connecting aVCR
or
ahome video game system to the terminals located on the rear
of
the LCD
TV
set.
When connecting an external device, turn
off
the power
of
the LCD
TV
set first to prevent any possible damage.
VCR
VCR
Digital TV
tuner
DVD player
Audio
amplifier
9ffl
,.
"ui
ff
*
If
your
external
device
has
a
component
terminal,
COMPONENT
connection
is
recommended
(you can
view
high-quality
pictures).
Home video
game system Camcorder
INPUT3/0UTPUT terminal
INPUT2 terminal
INPUT1 terminal (COMPONENT)
Audio
(L)
Video
Video
S-Video
Audio
(R)
-----+,.
*
If
your
external
device
has
an
S-video
terminal,
S-VIDEO
connection
is
recommended.
Audio
cable
IINPUT3/0UTPUTI
AudioNideo
cable
!INPUT21
!INPUT11
S-
Video
cable
Component
cable
~[3
E~::
:
[
~~====~ijCJP
.....
__
A_Ud_iO.......;(~L):.........-~
~
~_Audio(R)
~
I
NOTE
::.
•For the cable, use acommercially available audio/video cable.
•PC connection is not possible.
•For more information about external device connections, see the operation manuals
of
your external devices.
•Make sure that the corresponding cables are connected to each terminal. Connecting other cables may result
in
amalfunction.
•INPUT2 has two video input terminals, VIDEO and S-VIDEO terminals. If your external device has
an
S-VIDEO terminal, S-VIDEO
connection is recommended. S-VIDEO provides afiner, more detailed picture. If both terminals are connected, S-VIDEO terminal takes a
priority.
•For the INPUT1 mode, picture can be displayed only when 4801, 480P,
5761,
576P, 720P
or
10801 signal is received.
I
Outputting
Video
and
Audio
(Video
Output)
I
You
can output video and audio signals from the LCD
TV
set through the
INPUT3/0UTPUT
terminals. (See page 25.)
•When using
INPUT3/0UTPUT
as an output terminal, select "SETUP"
in
the Menu and set "INPUT3 SELECT" to "OUT".
I
NOTE
>
•When using the S-VIDEO input for INPUT2 or COMPONENT input for INPUT1, no video signal will be made to the
INPUT3/0UTPUT
terminal, but audio signal will be made for connection to external audio systems.
@13
EZ SETUP
(With
AUTO CLOCK Setting)
EZ SETUP during the
First
Power On
INOTE >
•If you select "OFF", EZ
SETUP
will be canceled.
2
1 1 :
53
AM
NOW
SEARCHING
TIME
PLEASE
WAIT
AUTO
PROGRAMMING
PLEASE
WAIT
~STEREO
SAP
MONO
Once EZ SETUP is completed, the lowest channel
number memorized will
be
displayed.
The LCD
TV
set will automatically switch to searching
for EDS signals.
If EDS signals are received, the channel number and
time will
be
displayed, and then the screen shown
in
step 5appears.
The tuner will automatically search for the broadcasting
and cable
TV
channels. (The channel number will
automatically increase when it appears.)
Press ENTER to access START EZ SETUP mode.
Press
.JJJ../T
to select "YES", and press ENTER.
INOTE >
•
If
you
want
to stop the
EZ
SETUP
process
once
it has
started, press
MENU
and it will be canceled. If you want to
set up again, please refer to CH
SETUP
on page 24.
INOTE >
Do not let the EZ SETUP screen remain unattended for along time.
If
EZ
SETUP
does
not memorize all the channels in your region,
please refer to page
24
for
more information on manually
memorizing the channels using CH SETUP.
It may be difficult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect
or
the frequency
jamming
is occurring around the area. Please refer to page
24
for
more
information
on
manually
memorizing
channels
using
CH SETUP.
If
there are no channels with EDS signals
or
the antenna signal
is weak, the AUTO
CLOCK
setting may not operate.
In
this case,
the "EDS CH IS NOT AVAILABLE." message will
appear
and the
mode
will change to
MANUAL
CLOCK
setting. Refer to page 15
to set the clock manually.
AV
MODE
DISPLAY
0 0
8.···
·······::::··::::·::':::·:·:·::·::·:··:··
..
··
8
<lI~:
~
MENU
RC5N-'-
iU
Press ENTER to access AUTO CLOCK mode.
Press
.JJJ../T
to select "ON" or "OFF".
When you select "ON", the LCD TV set will
automatically adjust the clock to search time-signals
(EDS signals), which are provided by some
TV
stations. The AUTO CLOCK setting may take from
several minutes to
an
hour depending
on
the number
of
channels to receive and signal status. If you know the
channel
of
the EDS signal carrier (PBS or other)
in
your
area, select "OFF" and follow the procedure
in
AUTO
CLOCK
Setting.
(See page 15.)
Press POWER
on
the upper side of the main unit, to
turn
on
the
TV.
The SELECT LANGUAGE screen will
be displayed.
Press
.JJJ../T
to select "ENGLISH", "ESPANOL:'
(Spanish) or "FRAN9AIS" (French).
•When you turn
on
the LCD
TV
set for the first time, it will
automatically memorize the broadcasting channels and
clock.
Please perform the following instructions before you press
POWER.
(1)
Insert the batteries into the remote control. (See page
7.)
(2) Connect
the
antenna
cable
to
the
LCD
TV
set.
(See
page
8.)
(3) Connect the AC cord to the AC INPUT terminal
of
the
LCD
TV
set and plug
in
the AC cord to the wall outlet.
(See page 9.)
14
@
Setting
the
CLOCK
•Holding down
~/~
changes the setting at ahigh speed.
SET
TIME
DISPLAY
Press MENU to exit.
Repeat steps 1to 4
of
AUTO CLOCK
Setting.
Press
JIJ../"Y
to select "OST", and press
~/~
to select
"ON" or "OFF".
Press
JIJ../"Y
to select "TIME", and press
~/~
to set the
time, and press ENTER.
[
12:00AM
E------~11:59AM
J
11:59PM
E------~12:00PM
If there are no channels with EOS signals, set the clock
manually using MANUAL CLOCK.
MANUAL.CLOCK Setting
INOTE
:.
•Make sure to press ENTER after adjusting the time. Otherwise,
the time will not be set.
•When "DST" is set to "ON", the time entered is forwarded by 1
hour.
•Please be sure to set "DST" before setting "TIME".
INOTE
:.
CLOCK:
The AUTO CLOCK setting may take from several minutes to
an
hour depending
on
the number
of
channels
to
receive and signal
status.
EDS CH <AUTO
>:
If there are no channels with EDS signals
or
the antenna signal
is weak, the AUTO
CLOCK
Setting may not operate.
In
such a
case, the message "EDS CH
IS
NOT AVAILABLE." appears, and
the
CLOCK
setting screen (in step 4
in
AUTO
CLOCK
Setting)
is displayed. Refer to
MANUAL
CLOCK
Setting
to set the clock
manually.
EDS CH <Not AUTO
>:
If the channel you have selected for "EDS CH" is wrong or the
EDS signal carrier is weak, or when there is no broadcast, the
AUTO CLOCK Setting may not operate.
In
such cases, the
message "EDS CH
(XXX)
EDS DATA
IS
NOT AVAILABLE."
appears, and the CLOCK setting screen (in step 4
in
AUTO
CLOCK
Setting)
is displayed as
in
the case with EDS CH
<AUTO
>.
Follow step 4and repeat the AUTO CLOCK Setting
procedure.
If broadcasting channels are not memorized, EDS signals cannot
be received even when the "EDS CH" is set to "AUTO".
In
this
case, try EZ SETUP again. (See page 24.)
Press
JIJ../"Y
to select "AUTO", and press ENTER.
Press
JIJ../"Y
to select "CLOCK", and press ENTER.
SETUP
Press MENU to display the Menu screen.
Press
~/~
to select "SETUP".
AUTO CLOCK Setting
•
Backup
The clock function
is
maintained for about 5minutes even
when the AC cord has been shut
off
due to apower outage
or when moving the
LCO
TV
set. (Since about 30 minutes
are required to charge the backup power supply, it may not
be possible to maintain the clock function
if
the charging
time is excessively short.)
If the clock setting has been reset, repeat the procedures on
this page.
•When set to "AUTO CLOCK", the current time is acquired
automatically when the main power is turned OFF. (This function
will not work when EDS CH is not set.)
•If you do not know the channel that carries EDS signals
in
your
area, set "EDS CH" to "AUTO" and press ENTER. If
you
know the
channel
of
the EDS signal carrier
in
your area, press
~/~
to select
the channel and press ENTER.
SE
TI
There are two methods
of
setting the clock: AUTO CLOCK
and MANUAL CLOCK. AUTO CLOCK uses EOS signals,
which are provided by some
TV
stations, to automatically
adjust the clock. MANUAL CLOCK sets the clock manually
in
areas where no channel carries EOS signals.
@
15
Basic
Operation
Daylight
Saving
Time
(DST)
Adjustment
The Daylight Saving-Time changes as shown below. Set the
DST to "ON" to forward the clock by 1hour.
To
rewind the
clock by 1hour, set the DST
to
"OFF".
(Spring)
On the first Sunday
in
April DST starts.
1
:OOAM
2:00AM
•
'Advances
1hour.
:/
,.
3:00AM 4:00AM
(Autumn)
On
the last Sunday
in
October DST finishes.
1
:OOAM
2:00AM
,.
:
"ReWindS
1hour.
---
.........
--
...
1
:OOAM
2:00AM
Turning On and
Off
the
Main Power
TIME DISPLAY POWERIWAKE UP TIMER
indicator
You
can display the current time on the screen. •Press POWER. The POWER/WAKE UP TIMER indicator
instantly changes from red to green and the LCD
TV
set
is turned on.
On-screen
display
I
~
STEREO
SAP
MONO
CD®®
0®®
POWER
II
INOTE >
•The on-screen display disappears in afew seconds.
Standby
•
To
turn
off
the main power, press POWER again.
No display
Displays the current time on the screen.
Press
£../T
to select "TIME DISPLAY", and press
ENTER.
Repeat steps 1to 3
of
AUTO
CLOCK
Setting
on
page
15.
To
turn
off
the
LCD
TV
set
Press MENU to exit. Press POWER. The POWER/WAKE UP TIMER indicator
will turn red.
INOTE >
•
When
you press DISPLAY, the current time is displayed for
about
To
turn
the
LCD
TV
set
back
on
10 seconds. Press POWER again. The POWER/WAKE UP TIMER
indicator will turn green.
16 @
Basic
Operation
(Continued)
Switching
the
Input
Modes
(INPUT11INPUT2/INPUT3ITV) Sound· Volume
•To
adjust
the
volume
MUTE
VOL CH
INPUT
~05~1:§~K
CD®®
CD®®
~
STEREO
<ON
AIR
SAP
<ON
AIR
MONO
POWER
,
Press MTS to display the MTS screen.
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP: secondary audio program
MONO: monophonic audio
•To
select
MTS
(Multichannel
TV
Sound)
•Press MUTE or
VOL
(+)/(-)
to turn the sound back to
the previous level.
The mute function
is
automatically turned
off
when any
of
the following buttons are pressed: POWER, MUTE,
VOL(+)/(-)
or
MTS.
VOLUME
10 1111111111·············································
•To
mute
the
sound
•Press MUTE to temporarily turn
off
the sound.
The MUTE mark
C*
is
displayed for 4seconds.
I
D*
•Press
VOL
(-)
to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10 1111111111·············································
•Press VOL
(+)
to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
1111111111111111111111111111111111111111111111
..
•••••••
INOTE >
•When
VOL
(+)/{-)
is pressed
in
the Mute mode, the sound turns
on
and the volume indicator is displayed.
•The Mute function is canceled when POWER is pressed.
INPUT31
I NPUT 1I
720P
INPUT21
TV mode
INPUT3 mode
INPUT2 mode
INPUT1 mode
Press INPUT to select the applicable input source. The
screen changes
in
order
of
INPUT1, INPUT2, INPUT3
and
TV
mode each time INPUT is pressed.
Turn on the power
of
the connected video equipment.
\~
MUTE
VOL CH
INP
....
UT
fir
O+§A§
•
AUDIO
ONlY
FLASH'BACK
0-
v0
!NOTE>
INPUT1:
Used for video equipment connected to the COMPONENT
input terminals.
INPUT2:
Used for video equipment connected to the INPUT2
terminals.
The S-video input terminal is additionally provided for the
IN
PUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
IN
PUT3/0UTPUT:
IN
PUT3 mode is used to adjust the preset settings and
IN
or
OUT
can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 25.)
INOTE >
•"ON
AI
R"
appears when aSTEREO or SAP broadcast is being
aired.
@17
Basic
Operation
(Continued)
Changing Channels
MUTE
VOL CH
INPUT
~~~~§:I~i-
•••
•••
•••
®
••
Selecting.Menu Items
The menus can be used to adjust the various settings
of
the
LCD
TV
set. Select the desired menu item by following the
steps below. See the next page for each Menu screen.
INOTE >
•The items displayed
differ
depending on the setting conditions.
•
The
item selected is displayed in yellow.
•Settings
most
recently adjusted will be saved in memory.
You
can select channels using
Channel
Select
or
CH
(A)/(V).
•
Using
the
remote
control
Press MENU RETURN to return to the previous screen,
or press MENU to exit.
Press
<llIIII/~
to select the desired menu item.
•The cursor moves left
or
right.
•The cursor indicates the selected menu item.
Press MENU on the remote control to display the Menu
screen.
Control panel
of
the main unit
Press
£/"Y
to select the desired item, and press
<llIIII/~
to adjustthe selected item.
•For "AV MODE", "OPC", "ADVANCED" and "RESET",
press ENTER to display the setting screen.
PICTURE
•
Using
the
control
panel
of
the
main
unit
You
can also operate the menu with the control panel of the
main unit.
Button operations on the control panel correspond to the
ones on the remote control as shown below.
Press the
CD
button.
11-1
Press the
CD
button.
Press the
CD
button.
115
1
Press the
~
button.
1--1
Press the mbutton.
0-1
•This LCD
TV
set allows you to select up to 125 channels
(1
to 125).
To
select achannel, enter a2- or 3-digit number.
To
select a3-digit channel number (e.g., Channel
115):
Complete the following procedure within 4seconds.
INOTE >
•
The
3-digit
channel
number
can be selected only when the
receiving
mode
is set to "CABLE" in "CH SETUP". (For details on
setting the receiving mode, see page 24.)
To
select a
1-
or 2-digit channel number
(e.g.,
Channel
5):
Complete the following procedure within 4seconds.
INOTE >
•
When
selecting a1-digit channel number, do not fail to press the
CD
button first.
•
Using
Channel
Select
When selecting the channel using
Channel
Select,
complete input
of
the channel number by holding down the
button for the last digit for amoment.
Changing channels with
CH
(A)/(V)
on
the remote control
Air:
Press
CH
(A)
and
the
channels
change
in
the
order
shown
below:
2
~
3
~
...
~
68
~
69
~
2
~
3
~
...
Press
CH
(v)
and
the
channels
change
in
the
order
shown
below:
3
~
2
~
69
~
68
~
...
~
3
~
2
~
...
Cable:
Press
CH
(A)
and
the
channels
change
in
the
order
shown
below:
1
~
2
~
3
~
...
~
125
~
1
~
2
~
3
~
...
Press
CH
(v)
and
the
channels
change
in
the
order
shown
below:
3
~
2
~
1
~
125
~
...
~
3
~
2
~
1
~
...
VOL
(-)/(+):
Cursor
<llIIII/~
on
the remote control
CH
(V)/(A):
Cursor
"Y/£
on
the remote control
MENU: MENU on the remote control
INPUT: ENTER
on
the remote control
•
Using
FLASHBACK
•Press
FLASHBACK
to switch the currently tuned
channel to the previously tuned channel.
•Press
FLASHBACK
again to switch back to the currently
tuned channel.
18 @
Basic
Operation
(Continued)
•Menu
setting
screens
For details on setting each menu item, refer to the page number indicated below.
INOTE
:.-
•The
illustrations
and
on-screen
displays
in
this
manual
are
for
explanation
purposes
and
may
vary
slightly
from
the
actual
appearance.
•Depending on the setting condition, such as an input mode, it may not be possible to adjust
or
set some items.
In
such cases, the alert
message (Example: NOT AVAILABLE WITH THIS SIGNAL.) is displayed
on
the menu setting screen.
~ENiEIl··IfilmiWIlEiURNR11B'BMENUBi
The
bar
above
is
an
operational
guide
for
the
remote
control.
The
bar
will
change
in
accordance
with
each
menu
setting
screen.
AUDIO
Page
AV MODE 20
OPC 20
BACKLIGHT
21
CONTRAST
21
BRIGHTNESS
21
COLOR
21
TINT
21
SHARPNESS
21
ADVANCED
22,23
RESET
21
Page
TREBLE 23
BASS 23
BALANCE 23
RESET 23
SETUP
OPTION
Page
CH
SETUP 24
MTS 17,25
CLOCK
15,
16
INPUT3 SELECT 25
V-CHIP BLOCK 26-29
CLOSED CAPTION 30
COLOR SYSTEM
12,
25
LANGUAGE
14,
25
Page
VIEW MODE
31
AUDIO ONLy
32
BLUE SCREEN
32
SLEEP TIMER 33
WAKE-UP TIMER 33
NO SIGNAL OFF 34
NO OPERATION OFF 34
PICTURE FLIP 34
@19
Other manuals for Aquos LC-20S5U
2
Table of contents
Other Sharp LCD TV manuals
Sharp
Sharp Aquos LC-13B4M User manual
Sharp
Sharp Aquos LC-13S1M User manual
Sharp
Sharp LC 13SH6U User manual
Sharp
Sharp LC-26GA3E User manual
Sharp
Sharp LC-26SH330E User manual
Sharp
Sharp LC-32CHE6241K User manual
Sharp
Sharp LC-55LE643U Instruction Manual
Sharp
Sharp AQUOS LC-37HV4M User manual
Sharp
Sharp LV-15B2EA User manual
Sharp
Sharp LC-60UF30H User manual
Sharp
Sharp LC-20SH7U - 20" LCD TV User manual
Sharp
Sharp Aquos LC-30HV4E User manual
Sharp
Sharp AQUOS LC-70LE732U User manual
Sharp
Sharp AQUOS LC-60LE831U User manual
Sharp
Sharp LC-60LE830X User manual
Sharp
Sharp AQUOS LC-32D62U User manual
Sharp
Sharp Aquos LC 32HT3U User manual
Sharp
Sharp 32BC1KE Technical manual
Sharp
Sharp Aquos LC 20S4U User manual
Sharp
Sharp Aquos LC46D65E User manual
