182
182
Part Names
-
Remote Control Unit
To open the cover
Hold the cover by the
projections on both sides
and lift upwards.
*
This button can be conveniently used
when you are at a loss during menu or
EPG operation, etc.
Press to finish menu operation, etc.
Press to temporarily turn off the sound.
Press again to return the sound volume
to the previous level.
Use to select a digital channel by entering
the 3-digit channel number.
Press to adjust the volume.
Press to select the desired input.
Press to engage the TV set in the active
or standby mode.
Use to select a menu item, column, etc.
Use to operate EPGs and data program
screens.
Press to confirm a selected setting or
menu item.
Press to display or turn off the Electronic
Program Guide (EPG: 番組表) when
receiving a digital broadcast.
Press to select a user-registered
channel and to turn on/off the favorite
channel register/registered channel
table screen.
Press to display the EPG for currently
on-air programs only (裏番組).
Press to go back to the previous screen.
Press this button instead of the
Enter/Confirm (決定) button when you
have selected the wrong item or input the
wrong number, etc.
• Press to select a channel.
•
Use to input a number for various settings.
Press to select the desired remaining time
period after which the TV set is
automatically turned off and enters the
standby mode.
Press to display or turn off the channel
call, etc.
Press to display detailed information on
the current digital program.
Press to display or turn off the menu
screen.
The menus can be displayed in English.
See 183for instructions on how to
switch the display language.
Press to display the i.LINK control panel.
Press to select channels in the
current network, media and CATV
channels in the ascending or
descending order.
* CATV channels are factory set to be
skipped.
Press to select the desired media (TV,
radio, or data).
Press to call the data broadcast linked
with the current digital TV program.
Press to display, select, or turn off
captions when watching a digital program
with captions.
Press to select the desired picture when
watching a digital multi-picture program.
Press to select the picture/sound setting
that best matches the current program.
Press to freeze the picture.
Press to select the desired audio.
Press to select the desired screen mode.
Press to operate “Familink” Recorders
and AQUOS Surround connected via
HDMI cables.
Familink 112
Press to operate “Familink” Recorders
and AQUOS Surround connected via
HDMI cables.
Select the CS digital channel for the first
time. 39
Finish 44
Favorite channel select/
register 65
Mute
Digital channel number input
65
BS select 64
Volume up (+)/down (
-
)
Active/Standby 43
Input select 97
Cursor (up, down, left, right)
44
Color 70・71・77
Enter/Confirm 44
Terrestrial analog select
64
EPG 68
Terrestrial digital select 64
Other on-air programs 69
Return 44
Channel select 64
Sleep timer 134
When selecting a CATV channel by entering
the channel number, press this button first,
then enter the 2-digit number with the TV
channel select buttons (1-10/0).
CATV 65
Display 64
Program info 76
Menu 44
i.LINK 122
CS select 64
Channel up (∧)/down (∨)
64
Media select 64
(linked data broadcast)
77
Caption 75
Picture select 75
AV mode select 86
Freeze 76
Audio select 74・75
Screen mode 84
Familink 112
D30080110.indb182D30080110.indb182 2008/01/1515:43:152008/01/1515:43:15
