Sharp Aquos LC-40LE530M User manual

LC-40LE530M
LC-46LE530M
LC-60LE630M
LCD COLOUR TELEVISION
OPERATION MANUAL
ENGLISH ภาษาไทย

1
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
Contents
Page
Dear SHARP customer........................................ 1
Supplied accessories.......................................... 1
Important Safety Precautions ............................ 2
Trademarks.......................................................... 2
Attaching the stand unit – 40/46LE530M........... 3
Attaching the stand unit – 60LE630M ................ 4
Angle adjustment (only for 40/46LE530M) ........ 5
Setting the TV ...................................................... 5
Connecting external devices.............................. 6
Remote control unit ............................................ 7
Part names ........................................................... 8
Turning the TV on/off .......................................... 8
Initial auto installation......................................... 9
Auto installation................................................... 9
Programme setup................................................ 9
Selecting a preset AV mode ............................. 10
Page
Menu operation.................................................. 11
Picture menu...................................................... 11
Audio menu ........................................................ 12
ECO menu .......................................................... 12
Setup menu........................................................ 13
Option menu ...................................................... 14
Picture and still image ...................................... 15
Wide Mode ......................................................... 15
Teletext function................................................ 16
PC compatibility chart ...................................... 16
USB media player .............................................. 17
Appendix ............................................................ 21
Specifications .................................................... 22
Removing the stand – 40/46LE530M ............... 23
Removing the stand – 60LE630M..................... 23
Mounting the TV on a wall ................................ 24
Supplied accessories
Remote control unit “AA” size battery (g2) Operation manual
Stand unit
LC-40LE530M LC-46LE530M
LC-60LE630M
ENGLISH

2
Important Safety Precautions
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the
product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the
product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers)
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take
special care near children and pets.
• The LCD panel is a very high technology product with 2,073,600 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT
terminal on the rear of the product.
Trademarks
• TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
• SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete
with rich bass, high frequency detail and clear dialog.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
• DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an
official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert
your files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to complete your registration.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.

3
4Insert and tighten middle screws into the holes
on the rear of the TV.
40 inch models 46 inch models
5Attaching the stand cover.
1Insert the stand cover.
2Insert and tighten a short screw into the hole of the
stand cover.
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
Attaching the stand unit —
40/46LE530M
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over.
1Confirm that there are screws with the stand
unit.
For 40 inch models
(three long screws, three middle screws and one
short screw)
For 46 inch models
(four long screws, four middle screws and one
short screw)
2Attach the supporting post for the stand unit
onto the base using the long screws with a
screwdriver as shown.
Supporting post
40 inch models 46 inch models
3Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Soft cushion
40 inch models 46 inch models

4
4Attaching the stand cover.
1Insert the stand cover.
2Insert and tighten four short screws into the holes
of the stand cover.
NOTE
• To detach the stand unit, perform the steps in reverse order.
• A screwdriver is not supplied with this product.
Attaching the stand unit —
60LE630M
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
• Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
1
Confirm that there are screws with the stand unit.
For 60 inch models
(Eight long screws and four short screws)
2Attach the supporting post for the stand unit
onto the base using the long screws with a
screwdriver as shown.
Supporting
post
Front
3Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Soft cushion

5
Angle adjustment (only for 40/46LE530M)
The TV can be rotated up to 15 degrees to the right or left.
15°
15°
Front
CAUTION
• Adjust the screen with both hands. Place one hand on the TV and rotate the screen while holding the bottom of the stand (the
black part in the above illustration) with your other hand.
Setting the TV
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
VHF/UHF
antenna
or
VHF/UHF
antenna
300-ohm twin-
lead flat feeder
(not supplied)
75-ohm
impedance
converter
(not supplied)
Standard DIN45325
plug (IEC 169-2)
75-ohm coaxial
cable (round cable)
(not supplied)
To antenna terminal
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-
2), plug it into the antenna jack at the rear of the
set.
If your outdoor antenna uses a 300-ohm twin-
lead flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
• The illustrations used throughout this manual are based on LC-46LE530M.

6
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 4/INPUT 5 or INPUT 6 terminals.
When using composite cable
(commercially available)
When using component cable
(commercially available)
AUDIO
L
R
Y
PB
(CB)
PR
(CR)
AUDIO
L
R
VIDEO
VCR/Game
console/
Camcorder
VCR/Game
console/
Camcorder
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the HDMI 1/HDMI 2/HDMI 3, INPUT 6 terminals when connecting to a DVD player/Digital TV
STB (Set Top Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
AUDIO
L
R
Y
PB
(CB)
PR
(CR)
DVD player/
Digital TV
STB (Set Top
Box)
DVD player/
Digital TV STB
(Set Top Box)
Connecting a PC Using Digital Audio Output
You can use the PC terminals when
connecting to a PC.
It is possible to output audio through the DIGITAL AUDIO
OUTPUT terminal. PCM audio outputs from the terminal.
ANALOG
RGB
AUDIO
(L/R)
PC
To optical digital input of
external audio devices
Optical fibre cable
(commercially available)
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. ( The audio of the
content you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
• The illustrations used throughout this manual are based on LC-46LE530M.

7
Remote control unit
1
2
3
5
7
8
6
4
9
10
11
13
12
14
15
16
SLEEP
Set the Sleep timer.
0 hr. 30 min. 1 hr. 00 min.
2 hr. 30 min.
1 hr. 30 min.
2 hr. 00 min.
Off
AV MODE
Select an audio and video setting. (See page 10.)
MPX
Select the sound multiplex mode.
e(Mute)
Press
esMutes sound.
Press
eagain sRestores sound.
Mute will be cancelled after 30 minutes. However, the TV will
not suddenly output loud sound as the volume level will be set
to 0 automatically. Increase the volume level by pressing VOL
k.
10 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
11 CHa/CHb
TV input mode: Select the channel.
(CHa) Increase the channel number.
(CHb) Decrease the channel number.
TELETEXT mode: Select the page. (See page 16.)
12 INPUT (INPUT SOURCE)
Select an input source.
13 PC
Directly select the PC terminal.
14 MENU
Display the menu screen.
15 RETURN
MENU mode: Return to the previous menu screen.
16 m(TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image, TV/
TEXT image) (See page 16.)
k(Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page 16.)
[(SUBTITLE for TELETEXT)
To turn the subtitles on. (See page 16.)
3(Hold)
TELETEXT mode: Stop updating Teletext pages automatically.
Press 3again to release the hold mode. (See page 16.)
1(Subpage)
Display the Teletext subpage directly when in Teletext mode.
(See page 16.)
v(Top/Bottom/Full)
TELETEXT mode: Set the area of magnification. (See page 16.)
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 8.)
2 0 – 9
Set the channel.
TELETEXT mode: Set the page. (See page 16.)
3 A(Flashback)
Press
Ato return to the previous selected channel
or external input mode.
4 WIDE
Change the wide image mode. (See pages 15 and
16.)
5 FREEZE
Freeze a motion picture on the screen. (See page
15.)
6 a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
7 EXIT
Return to the default screen.
8 Colour (Red/Green/Yellow/Blue)
TELETEXT mode: Select a page. (See page 16.)
9 DISPLAY
Display the channel or input information.
Inserting the battery
Before using the TV for the first time, insert a “AA” size battery (supplied). When the battery become depleted
and the remote control fails to operate, replace the battery with new “AA” size battery.
1Open the battery cover. 2Insert the supplied “AA” size battery. 3Close the battery cover.
• Place battery with their terminals corresponding to the
(e) and (f) indications in the battery compartment.
CAUTION
• Battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not mix batteries of different types.
• Do not mix old and new batteries.

8
Part names
TV (Front)
Remote control sensor
POWER indicator
SLEEP indicator
OPC indicator
OPC sensor
Light off Power off
Lighted (Red) The TV is in standby
mode.
Lighted (Green) The TV is on.
TV (Rear)
1
2
3
4
5
17
18
6
15
10 11 12
16
713
8
9
14
1POWER (On/Off) button
2MENU button
3INPUT button
4Channel up (r)/down (s) buttons
5Volume up (e)/down (f) buttons
6HDMI 1 terminal*
7 HDMI 2 terminal
8 HDMI 3 terminal
9RS-232C terminal
10 INPUT 4/INPUT 5 terminals
11 DIGITAL AUDIO OUTPUT terminal
12 INPUT 6 terminals
13 AUDIO OUT terminals
14 AUDIO IN (R/L) terminal
15 PC terminals*
16 Antenna input terminal
17 USB terminal
18 Headphone jack ( 3.5 mm)
• The speakers do not output volume
when headphones are plugged in.
* The HDMI1 and PC terminals can both use the same audio input terminal. However, the proper item must be selected in
the “PC audio select” menu. (See page 14.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-46LE530M.
Turning the TV on/off
Turning on/off the power Standby mode
• To turn on the power
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.

9
Programme setup
Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1Press MENU and the MENU screen displays.
2Press c/dto select “Setup”.
3Press a/bto select “Programme setup”, and
then press ENTER.
4If you have already set the password, enter it
here.
• See page 13 for setting a password.
5Press a/bto select “Auto search”, and then
press ENTER.
6Press c/dto select “Yes”, and then press
ENTER.
Press a/bto select the desired sound system,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
Manual adjust
You can set some channel item manually.
1Repeat steps 1 to 4 in Auto search.
2Press a/bto select “Manual adjust”, and then
press ENTER.
3Press c/dto select “Yes”, and then press
ENTER.
4Press a/b/c/dto select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
5Press a/bto select the desired menu, and
then press ENTER.
6Press a/bor c/dto select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
HSearch
The next channel will be search in order.
HFine
You can adjust the frequency to your desired
position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/dto adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 — 9.
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
1Press POWER on the TV.
• The initial auto installation wizard appears.
2Press a/b/c/dto select the desired
language, and then press ENTER.
3Press c/dto select “HOME” or “STORE”, and
then press ENTER.
Press a/bto select the desired sound system,
and then press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
NOTE
• HOME mode: Settings are optimised for normal
home viewing and energy efficiency.
• STORE mode: Settings are designed for maximum
impact in retail store displays.
• To change the STORE mode to HOME mode, please
refer to page 14 to reset the unit.
Auto installation
You can run auto installation again, even after setting
up the preset channels.
1Press MENU and the MENU screen displays.
2Press c/dto select “Setup”.
3Press a/bto select “Auto installation”, and
then press ENTER.
4If you have already set the password, enter it
here.
• See page 13 for setting a password.
5Press c/dto select “Yes”, and then press
ENTER.
6Press a/b/c/dto select the desired
language listed on the screen, and then press
ENTER.
Press a/bto select the desired sound system,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.

10
Programme setup (Continued)
a
• 179.25 MHz: Press 1 s7 s9 s2 s5.
• 49.25 MHz: Press 4 s9 s2 s5 sENTER.
HColour system
Select the optimum colour system to receive. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
HSound system (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive. (B/G, D/K, I, M)
HLabel
To enter the name of the channel. Maximum 5
alphanumeric can be input.
Press a/b/c/d to select each character of the
new name for the channel, and then press ENTER.
Repeat until the name is fully spelt out.
• When you want to set a channel name of less than 5
characters, select “END”.
HBooster
Enhance the picture quality during weak signal. It is
not recommended to turn on during strong signal
condition. It may induced unwanted noise. (On, Off)
HSkip
Channels with “Skip” set to “On” are passed over
when using CHr/seven if selected while
watching the image from the TV.
HLock
You can block the viewing of any channel.
NOTE
• See “Child lock” for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated.” is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing ENTER while “Child lock has been
activated.” is displayed, password input menu will be
displayed. Inputting the correct password lifts the child
lock temporarily until the power is turned off.
Sort
Channel position can be sorted freely.
1Repeat steps 1 to 4 in Auto search.
2Press a/bto select “Sort”, and then press
ENTER.
3Press c/dto select “Yes”, and then press
ENTER.
4Press a/b/c/dto select the channel you
want to move, and then press ENTER.
5Move it to the desired position by pressing a/
b/c/d, and then press ENTER.
6Repeat the steps 4 and 5 until all desired
channels are sorted.
Erase programme
The individual programme can be erased.
1Repeat steps 1 to 4 in Auto search.
2Press a/bto select “Erase programme”, and
then press ENTER.
3Press c/dto select “Yes”, and then press
ENTER.
4Press a/b/c/dto select the channel you
want to erase, and then press ENTER.
5Press ENTER to erase the channel.
6Repeat the steps 4 and 5 until all desired
channels are erased.
Selecting a preset AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1Press AV MODE.
2Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” menu screen.
Selected item Description
STANDARD For a highly defined image in a normally
bright room.
MOVIE For a movie.
GAME For game play.
PC For PC. (Available only when inputting an
HDMI or PC signal.)
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
NOTE
• You can select a different AV mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only “STANDARD”, “PC” and
“USER” can be selected under the AV mode selection.

11
HAdvanced
Colour temp. (Colour temperature)
Adjusts the colour temperature to give the best white
image.
Selected item Description
High
Mid-High
Middle
Mid-Low
Low
White with bluish tone
White with reddish tone
Quick shoot
Use Quick shoot to view fast-action images more
clearly. (On, Off)
NOTE
• Quick shoot may cause image noise. If this occurs, set the
function to “Off”.
Film mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality. (On, Off)
Active contrast
Automatically adjusts the contrast of an image according
to the scene. (On, Off)
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise. (On, Off)
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
For viewing images in monochrome. (On, Off)
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer video
image. (Off, High, Low, Auto)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press a/bto select “Reset”, press ENTER, press
c/dto select “Yes”, and then press ENTER.
Menu operation
1Press MENU and the MENU screen displays.
2Press c/dto select the desired menu. (Picture,
Audio, ECO, Setup, Option)
3Press a/bto select the desired menu item.
Press ENTER to proceed if necessary.
4Press a/bor c/dto select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Picture menu
–16
0
[ + 8 ]
–30
[
0]
–30
[
0]
–30
[
0]
–10
+16
+40
+30
+30
+30
+10
[
0]
[ +30 ]
Picture Audio ECO
AV mode
OPC
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[STANDARD]
[Off]
HOPC (Optical Picture Control) setting
You can set the TV to automatically adjust the
screen to suitable backlight brightness according to
the lighting conditions.
Selected item Description
On:Display Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On Automatically adjusts.
Off The brightness is fixed at the value set in
“Backlight”.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
HPicture adjustments
Selected item c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
purplish
Skin tones become
greenish
Sharpness For less sharpness For more
sharpness

12
ECO menu
[Disable]
[Disable]
ECO
No signal off
No operation off
Ecology
Setup Option
Power management
4
HNo signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals, such as the end of
a broadcast day. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• “Disable” is the factory preset value.
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
HPower management (PC input mode only)
You can set the TV to automatically power off when
no image is displayed on PC.
Selected item Description
Off • No power management
• Factory preset value.
Mode1 • If no signal inputs for approximately
8 minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 8.)
Mode2 • If no signal inputs for approximately
8 seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 8.)
HNo operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30min., 3hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• “Disable” is the factory preset value.
HEcology
When set to “Yes”, the TV activates the following
power saving mode.
• “OPC” set to “On” (Page 11)
• “No signal off” set to “Enable” (Page 12)
• “Power management” set to “Mode1” (Page 12)
• “No operation off” set to “3hr.” (Page 12)
• “Quick start” set to “Off” (Page 14).
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
Audio menu
–15
–15
[
0]
L
[
0]
+15
+15
R
[Off]
[On]
[
0]
Audio ECO
STANDARD
Setup
Treble
Bass
Balance
SRS TS HD
Bass enhancer
Reset
HAudio adjustments
Selected item c button d button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
HSRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the
same as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects from
the “Audio” setting.
Selected item Description
On SRS TruSurround HDTM creates a high
quality surround sound experience, when
watching DVD movies and TV programmes
broadcast in surround sound.
Off Outputs the normal sound.
HBass enhancer powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced
sound.
Selected item Description
On Bass enhancer function is on.
Off Outputs the normal sound.
NOTE
• For resetting all Audio adjustment items to the factory
preset values, press a/bto select “Reset”, press
ENTER, press c/dto select “Yes”, and then press
ENTER.

13
Setup menu
Auto installation
Programme setup
Child lock
Input label
4
HDMI A Vi
4
Position
Setup Option
Input skip
HChild lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1Repeat steps 1 to 2 in Menu operation.
2Press a/bto select “Child lock”, and then
press ENTER.
3If you already set the password, enter it here.
4Press a/bto select “Change password”, and
then press ENTER.
5Enter the 4-digit number as a password using
0 — 9.
Change password
Clear password
New password
– – – –
Reconfirm
–– – –
Enter your new password. Use 4 digits
4
6Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• To view a locked channel (Lock setting in Programme
setup “Manual adjust” is set to “On”), you must enter a
password. When you select a locked channel, “Child lock
has been activated.” is displayed.
• Press ENTER to display the password input window.
Clearing the password
Allow you to clear your password.
1Repeat steps 1 to 3 in Setting a password.
2Press a/bto select “Clear password”, and
then press ENTER.
3Press c/dto select “Yes”, and then press
ENTER.
HInput skip
This setting allows you to skip the HDMI or PC input
on the input source selection operation.
HDMI 1
HDMI 2
HDMI 3
PC
Yes No
Skip input selection of HDMI
HInput label
You can assign each input source a label as you
prefer.
1Press INPUT to select the desired input source.
2Press MENU and the MENU screen displays.
3Press c/dto select “Setup”.
4Press a/bto select “Input label”, and then
press ENTER.
5Press a/b/c/dto select each character of the
new name for the input source, and then press
ENTER.
6Repeat until the name is fully spelt out.
• The name can be 6 characters or less.
• When you want to set an input source name of less
than 6 characters, select “END”, then press ENTER
to exit from the labelling menu.
NOTE
• You cannot change labels if the input source is TV.
HPosition
For adjusting a picture’s horizontal and vertical
position.
Selected item Description
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
HHDMI auto view (HDMI input mode only)
Selected item Description
Enable/
Disable
Set whether or not to use WIDE MODE
based on signal recognition, including an
HDMI signal.
HWSS
WSS allows a television to switch automatically
among the different screen formats. (On, Off)
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
• Not available for COMPONENT, PC and HDMI signal.
H4:3 mode
The WSS signal has 4:3 auto-switching that allows
you to select between Panorama and Normal.
Selected item Description
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
WSS signal 4:3 screen
4:3 mode “Panorama” 4:3 mode “Normal”

14
Setup menu (Continued)
HQuick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Selected item Description
On The TV quickly starts up from standby,
8.5 W or more of power consumption is
required during standby.
Off Power consumption is less than 1 W.
HLanguage
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
HText language
Select from among 3 kinds of language: West
Europe, Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
HIdentification
You can check the current version of the software on
the screen.
HReset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as Picture, Audio
and Programme will be reset to the factory preset values.
Option menu
[HDMI1]
[Fixed]
[On]
Option
PC audio select
Output volume select
Auto volume
4
HPC audio select
When using the PC terminal or HDMI1 terminal, you
must select which terminal uses the AUDIO (R/L)
jack for analogue audio input.
Selected item Description
HDMI1 When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI 1
terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
PC When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
• You must set this to “PC” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI
1 terminal. If “HDMI1” is set, there will be no sound output.
HOutput volume select
Allows you to select what controls the audio output.
Selected item Description
Fixed • Sound via speakers is adjusted with
VOL k/lon the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
Variable • Sound via the AUDIO OUT terminal
is adjusted with VOL k/lon the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• During “Output volume select” is set to “Variable”, all Audio
menu item cannot be adjusted.
HAuto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels.
(On, Off)
HClear voice
This function emphasises speech against
background noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
HDigital audio output
This function allows you to select your favourite
audio output system.
Selected item Description
PCM The optical output format is normally in
PCM.
Dolby Digital Dolby Digital audio will be output when
there is a Dolby Digital audio signal. The
output will be in PCM when there is no
Dolby Digital audio signal.
HAudio only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item Description
On Audio is output without screen image.
Off Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio only
function is set to “Off”.

15
NOTE
• For resetting all adjustment items to the factory preset
values, press a/bto select “Reset”, press ENTER, press
c/dto select “Yes”, and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
Input signal
• Some input signals may have to be registered
manually to display properly.
• The pairs of input signals (resolutions) in the list
below are not distinguishable when received.
In such case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
1280
g768 1360 g768
HDivX (R) Reg. Code
Please see page 20.
HVersion up
This function is only for service personnel to use for
software updates.
Picture and still image
You can freeze a motion picture on the Display.
1Press FREEZE.
• A still image displays.
2Press RETURN again to exit still image.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn’t function for PC input (all resolution).
Wide Mode
Auto Selection
If you set “WSS” and “4:3 mode” in the Setup menu,
the optimum WIDE mode is automatically chosen for
every broadcast containing the WSS information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 13.)
“4:3 mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 mode menu. (See page 13.)
4:3 mode set to “Panorama” 4:3 mode set to “Normal”
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Option menu (Continued)
HGame play time
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal
connected to the game console before starting the
game.
Selected item Description
On The elapsed time is displayed every 30
minutes when you switch to GAME mode
in external input mode.
Off Hides the time.
HColour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
HFine sync. (PC input mode only)
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto sync.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto
sync. In some cases, however, manual adjustment is
needed to optimise the image.
Selected item Description
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
Clock Adjusts when the image flickers with
vertical stripes.
Phase Adjusts when characters have low
contrast or when the image flickers.

16
Wide Mode (Continued)
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
1Press WIDE.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable for
the type of video signal currently received.
2Press WIDE or a/bwhile the WIDE MODE
menu displays on the screen.
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item Description
Normal For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom with
some programmes.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Dot by Dot Displays an image with the same number
of pixels on the screen (only when
receiving a 1080i/1080p/SXGA/SXGA+
signal.
Underscan Display with an Underscan image only
when receiving a 720p signal. Display
with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.
Turning on and off Teletext
1Select a TV channel or external input source
providing the Teletext programme.
2Press mto display the Teletext.
3Each time you press m, the screen switches
as shown below.
TELETEXT TELETEXT
NOTE
• If you select a programme with no Teletext signal, “No
Teletext available.” is displayed.
Button functions
Buttons Description
CH
(r/s)
Increase or decrease the page number.
Colour (Red/
Green/
Yellow/Blue)
You can select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
0 — 9 Directly select any page from 100 to 899
by using 0 — 9.
v(Top/
Bottom/Full)
Switch the Teletext image to Top, Bottom
or Full.
k(Reveal
hidden
TELETEXT)
To reveal hidden information such as an
answer to a quiz.
3(Hold) To stop updating Teletext pages
automatically or release the hold mode.
[(Subtitle
for
TELETEXT)
Display the subtitle during Teletext page.
• Subtitle will not be displayed when
the service does not contain subtitle
information.
1(Subpage) Display the subpage during Teletext page.
PC compatibility chart
Resolution Horizontal
Frequency
Vertical
Frequency
VESA
Standard
VGA 720 g400 31.5 kHz 70 Hz
640 g480 31.5 kHz 60 Hz ✓
SVGA 800 g600 37.9 kHz 60 Hz ✓
XGA 1024 g768 48.4 kHz 60 Hz ✓
WXGA 1360 g768 47.7 kHz 60 Hz ✓
SXGA
1280
g
1024
64.0 kHz 60 Hz ✓
SXGA+
1400
g
1050
65.3 kHz 60 Hz ✓
Power Management is a registered trademark of Sun
Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Corp.

17
USB media player
HConnecting a USB device
Connect a USB device to the TV as shown below.
• The TV automatically switches to the USB mode when a
USB device is inserted in the USB terminal.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on
character set) may not be displayed.
• Do not disconnect a USB device or memory card from the
TV while transferring files, when a screen is switching to
another or before you exit “USB” mode.
• Do not connect and disconnect a USB device from the TV
repeatedly.
CAUTION
• Do not use a USB extension cable when connecting a
USB device to the USB terminal of the TV.
• Using a USB extension cable may prevent the TV from
performing correctly.
HUSB media
Press INPUT to select the “USB” mode or the TV
automatically switches to the USB mode when a
USB device is connected to the TV.
USB media
In this mode, you can enjoy viewing photos, listening
to music and watching videos from external USB
devices.
NOTE
• You cannot enter the USB mode when there is no USB
device.
• “Wide mode” is fixed during “Photo mode”, “Music mode”
and “Movie mode”.
Selecting modes
:Select ENTER :Enter
Photo mode Music mode Movie mode
USB media player
Select mode
1Press c/d to select among “Photo
mode”,“Music mode” and “Movie mode”.
2Press ENTER.

18
HMovie mode
1Press c/d to select “Movie mode”, and then
press ENTER.
2Press a/b to select the desired folder or
directory, and then press ENTER.
3Press a/b to select the desired video.
USB
File name
1/1 Page
Folder 1
Folder 2
Folder 3
Movie 1
Select movie
Movie1.avi
XXX MBytes
XXX x XXX
Buttons for video mode
Buttons Description
ENTER
When selecting a folder icon: Enter this
directory.
When selecting a video file: Display the
video in full screen.
a/b (Cursor) Select a desired item.
c/d (Cursor) Page up/down.
RETURN Return to the USB select mode.
Viewing video
Buttons for full screen display operation
Buttons Description
ENTER Play/Pause the video.
a(Cursor) Go to the previous file.
b(Cursor) Go to the next file.
d(Cursor)
The FWD speed changes every time
you press d. After playing to the end,
the player goes to the next file and starts
to play.
c(Cursor)
The REW speed changes every time
you press c. After going back to the
beginning, the player starts to play the
same file.
RETURN Return to the video list screen.
B button Reveal/hide the guide display.
R button Each time you press Rbutton on the
remote control, the subtitle switches.
G button Each time you press Gbutton on the
remote control, the mode switches.