Sharp LC-40LE360X User manual

MODEL
LC-32LE360X
LC-40LE360X
LED BACKLIGHT TV
OPERATION MANUAL
LC-3240LE360X_EN_G268.indd iLC-3240LE360X_EN_G268.indd i 8/5/2014 4:41:00 PM8/5/2014 4:41:00 PM

LC-3240LE360X_EN_G268.indd iiLC-3240LE360X_EN_G268.indd ii 8/5/2014 4:41:01 PM8/5/2014 4:41:01 PM

-1
ENGLISH
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
Supplied accessories
Remote control unit “AAA” size battery (g2) Operation manual
Safety restrains Stand unit
Screws for clamps Clamps
A963
-Fe-
14YO1A
Stand base Screws (g8)
Supporting post
Important Safety Precautions
• Stand base must be attached to prevent the TV set from falling down and cause injuries.
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product.
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming
pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting
in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended
by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven
floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and
openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special
care near children and pets.
• The LCD panel is a very high technology product with 1,049,088 (only for LC-32LE360X)/2,073,600 (only for LC-40LE360X)
pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue,
green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the
TV by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet or from the AC INPUT terminal
on the rear of the product.
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and
the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
Contents
Dear SHARP customer...................................................... 1
Supplied accessories........................................................ 1
Important Safety Precautions .......................................... 1
Important information ....................................................... 2
Trademarks........................................................................ 2
Quick Reference................................................................ 2
Attaching the stand ........................................................... 2
Preparation ........................................................................ 3
Antenna connection .......................................................... 3
Connecting external devices.............................................. 3
Part names and functions................................................. 4
Remote control unit........................................................... 4
TV (Front) .......................................................................... 4
TV (Rear) ........................................................................... 5
Watching TV....................................................................... 5
Turning the TV on/off......................................................... 5
Initial auto installation......................................................... 5
Checking Signal information .............................................. 5
Auto installation................................................................. 5
Programme setup ............................................................. 6
On-Screen Display Menu.................................................. 6
Selecting a preset AV mode .............................................. 6
Menu operation................................................................. 6
Picture menu..................................................................... 7
Audio menu....................................................................... 7
ECO menu ........................................................................ 7
Setup menu ...................................................................... 8
Option menu ..................................................................... 9
Direct Button Operation.................................................. 10
Programme Guide........................................................... 10
Info ................................................................................. 10
ATV/DTV/RADIO buttons ................................................ 10
Switching the analogue audio format............................... 11
EPG ................................................................................ 11
Colour adjustment and still image.................................... 12
ECO mode...................................................................... 12
Using a Smartphone with the TV ................................... 12
Teletext function.............................................................. 12
Using a PC........................................................................ 13
PC compatibility chart ..................................................... 13
PC Control of the TV ....................................................... 13
RS-232C commands list ................................................. 13
USB Media Player............................................................ 14
Appendix .......................................................................... 15
Specifications .................................................................. 16
Protection against overturning ...................................... 16
Dimensional drawings..................................................... 17
CLEARING THE PASSWORD.......................................... 18
Page Page
NOTE
• The illustration and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the
actual operation.
• Some features differ depending on the selected country.
LC-3240LE360X_EN_G268.indd 1LC-3240LE360X_EN_G268.indd 1 8/5/2014 4:41:01 PM8/5/2014 4:41:01 PM

-2
Important information
This product qualifies for ENERGY STAR when “HOME” is selected for “TV Location”.
Setting “TV Location” to “HOME” allows the TV to achieve an energy-saving status for household use.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
• SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with
rich bass, high frequency detail and clear dialog.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• Products that have earned the ENERGY STAR®are designed to protect the environment through energy efficiency.
• DivX®, DivX Certified®and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.
• ABOUT DIVX VIDEO: DivX®is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an
official DivX Certified®device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
• MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL, LLC in the United
States and other countries.
Quick Reference
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1Confirm the screws supplied with the TV.
Screws (m8)
2Fix the supporting post into the holes on the rear of the TV. (1)
Insert and tighten the four screws into the holes. (2)
3
DC5V0.9A
MHL
2
USB1
DC5V1.5A
POWER
5
8
AUDIOIN
RS-232CIOIOI
2
1
Soft cushion
3Insert the stand base to the stand post on the bottom of the TV. (3)
4Insert and tighten the screws into the holes on the rear of the TV. (4)
Insert this points
3
DC5V0.9A
MHL
2
USB1
DC5V1.5A
POWER
5
8
AUDIOIN
RS-232CIOIOI
3
4
NOTE
• To detach the stand, perform the steps in reverse order.
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.
• The illustrations used throughout this manual are based on LC-40LE360X.
LC-3240LE360X_EN_G268.indd 2LC-3240LE360X_EN_G268.indd 2 8/5/2014 4:41:01 PM8/5/2014 4:41:01 PM

-3
Preparation
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI/ARC)/INPUT 2 (HDMI/MHL)/INPUT 3 (HDMI)/INPUT 4 (HDMI)/INPUT 5 (HDMI)
or INPUT 6 terminals when connecting to a DVD player/Digital TV STB (Set Top Box) and other audiovisual
equipment.
When using HDMI-certified cable (commercially
available)
When using component cable (commercially
available)
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO-L
R-AUDIO- L
R-AUDIO-LVIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
5
INPUT 5
6
INPUT 6
R - AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AV INPUT
DVD player/
Digital TV STB
(Set Top Box)
DVD player/
Digital TV STB
(Set Top Box)
Connecting a PC
You can use the INPUT 8 PC terminals when
connecting to a PC of ANALOGUE RGB terminal.
You can use the INPUT 5 (HDMI) terminal when
connecting to a PC of DIGITAL DVI terminal.
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO - L
R-AUDIO - L
R-AUDIO - L VIDEO/YP
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
5
8
AUDIO IN
5
INPUT 5
5
8
AUDIO IN
ANALOGUE
RGB (PC)
ARC
8
INPUT 8
1
INPUT 1
ARC
1
INPUT 1
ANALOGUE
PC
ANALOGUE RGB DIGITAL DVI
PC
Connecting a USB device
Connect a USB device to the TV.
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from
the terminal.
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO - L
R-AUDIO - L
R-AUDIO - L VIDEO/YP
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
DIGITAL
AUDIO
OUTPUT
To optical digital input of
external audio devices
Optical fibre cable
(commercially available)
CAUTION
• Do not disconnect a USB device from the TV while transferring files, when a screen is in “USB” mode.
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
• The illustrations used throughout this manual are based on LC-40LE360X.
Antenna connection
Connect antenna cable to the antenna terminal
or
If your outdoor antenna uses a 75-ohm coaxial cable
with a standard DIN45325 plug (IEC 169-2), plug it into
the antenna jack at the rear of the set.
If your outdoor antenna uses a 300-ohm twin-lead flat
feeder, connect a 300-ohm to 75-ohm impedance
converter and plug it into the antenna jack at the rear of
the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 6 or INPUT 7 terminals.
When using component cable (commercially
available)
When using composite cable (commercially
available)
VCR/Game
console/
Camcorder
VCR/Game
console/
Camcorder
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO-L
R-AUDIO- L
R-AUDIO- L VIDEO/YP
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
7
INPUT 7
R - AUDIO - L
VIDEO
6
INPUT 6
R - AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AV INPUT
6
INPUT 6
R - AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AV INPUT
P
B
(C
B
)
P
R
(C
R
)
or
LC-3240LE360X_EN_G268.indd 3LC-3240LE360X_EN_G268.indd 3 8/5/2014 4:41:03 PM8/5/2014 4:41:03 PM

-4
Part names and functions
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1Open the battery cover. 2Insert the two supplied “AAA” size batteries. 3Close the battery cover.
• Place batteries with their terminals corresponding to the
(e) and (f) indications in the battery compartment.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
TV (Front)
POWER indicator
Light off Power off.
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
• The illustrations used throughout this manual are based on LC-40LE360X.
Remote control unit
DISPLAY
ATV/DTV
EPG
HDMI
GUIDE INFO RADIO
1
2
5
7
8
9
11
6
3
4
12
13
14
15
16
17
18
10 19
20
21
9 a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
10 ATV/DTV
Press to access analogue and digital TV mode.
(See page 10.)
11 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select
the coloured items on the screen.
TELETEXT mode: Select a page. (See page 12.)
12 ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
13 COLOUR ADJ. (FREEZE)
Freeze a motion picture on the screen and adjust the
colour tone of the still image. (See page 12.)
14 PHOTO
Display your pictures directly on the TV screen.
(See page 14.)
15 INPUT (INPUT SOURCE)
Select an input source.
16 CHr/CHs
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CHs) Decrease the channel number.
TELETEXT mode: Select a page. (See page 12.)
17 MENU
Display the menu screen.
18 MPX
Select the sound multiplex mode.
19 RETURN
MENU mode: Return to the previous menu screen.
20 m(TELETEXT), k(Reveal hidden for TELETEXT),
3(Hold), [(SUBTITLE for TELETEXT)
Use for TELETEXT mode. (See page 12.)
21 EPG
DTV mode: To display EPG (Electronic Programme Guide)
screen. (See pages 11 to 12.)
GUIDE
DTV mode: Display the programme channel list.
(See page 10.)
INFO
DTV mode: Display the programme information.
(See page 10.)
RADIO
Press to access RADIO mode. (See page 10.)
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 5.)
2 SLEEP
Set the Sleep timer.
0 hr. 30 min. 1 hr. 00 min.
2 hr. 30 min.
1 hr. 30 min.
2 hr. 00 min.
Off
3 HDMI
Select the HDMI input mode.
4 0 – 9
Set the channel.
TELETEXT mode: Set the page. (See page 12.)
5 A(Flashback)
Press
Ato return to the previous selected channel or
external input mode.
6 DISPLAY
Display the channel or input information.
7 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
8 e(Mute)
Press
esMutes sound.
Press
eagain sRestores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level
will be set to 0 automatically. Increase the volume level by
pressing VOLk.
LC-3240LE360X_EN_G268.indd 4LC-3240LE360X_EN_G268.indd 4 8/5/2014 4:41:11 PM8/5/2014 4:41:11 PM

-5
Watching TV
Checking Signal information
If you install a DVB-T antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
ATV/DTVATV
/
DTV
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Programme setup).
3Press a/bto select “Digital setting”, and then
press ENTER.
4Press a/bto select “Signal information”, and
then press ENTER.
• The “Signal information” screen will appear.
Auto installation
You can run auto installation again, even after setting
up the preset channels.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Programme setup).
3Press a/bto select “Auto installation”, and then
press ENTER.
If you have already set the password, enter it here.
• See page 8 for setting a password.
4Press a/bto select your country channels listed
on the screen, and then press ENTER.
Press a/bto select the desired language, and
then press ENTER.
* Press a/bto select “DTV”, “ATV” or
“DTV + ATV”, and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
*
NOTE
• In the setting of some country, selecting of “DTV”, “ATV” or
“DTV + ATV” may not be shown.
Turning the TV on/off
Turning on/off the power
• To turn on the power
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
Standby mode
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menu and make the necessary settings
one after another.
1Press POWER on the TV.
• The initial auto installation wizard appears.
2Press a/bto select your country channels listed
on the screen, and then press ENTER.
Press a/bto select the desired language, and
then press ENTER.
Press a/bto select “HOME” or “STORE”, and
then press ENTER.
HOME:
• “STANDARD” will be the default value for the “AV mode”
setting.
STORE:
• “DYNAMIC (FIXED)” will be the default value for the
“AV mode” setting. If the “AV mode” is changed, the TV
will automatically switch back to “DYNAMIC (FIXED)”
when there is no further change to TV setting for 30
minutes.
• The confirmation screen appears only when selecting
“STORE”. Press a/bto select “Yes” or “No”.
• To change the STORE mode to HOME mode, please
refer to page 9 to reset the unit.
*Press a/bto select “DTV”, “ATV” or
“DTV + ATV”, and then press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto search.
• If you select “Others” country, some of DTV channel
may not tune properly.
Part names and functions
TV (Rear)
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO -L
R-AUDIO - L
R-AUDIO- L VIDEO/YP
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
4
5
OUTPUT
DC5V 1.5A
INPUT 4
INPUT 5
USB 2
DC5V 0.5A
POWER
5
8
AUDIO IN
ANALOGUE
RGB (PC)
ARC
RS-232C IOIOI
8
INPUT 8
1
INPUT 1
DIGITAL
AUDIO
OUTPUT
6
INPUT 6
7
INPUT 7
AUDIO OUT
R - AUDIO - L
R - AUDIO - L
R - AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AV INPUT
VIDEO
USB 1
DC5V 1.5A
DC5V 0.9A
MHL
2
3
9
8
12 13
10
11
1
2
3
4
7 6 5
19
18
17
14 15 16
1 USB 1 terminal
2INPUT 2 (HDMI/MHL) terminal
3Headphone jack ( 3.5 mm)
• The speakers do not output volume when
headphones are plugged in.
4INPUT 3 (HDMI) terminal
5OUTPUT terminal (For power output only)*1
6 INPUT 4 (HDMI) terminal
7INPUT 5 (HDMI) terminal*2
8USB 2 terminal
9DIGITAL AUDIO OUTPUT terminal
10 INPUT 1 (HDMI/ARC) terminal
11 INPUT 8 terminal*2
12 AUDIO IN terminal
13 Antenna input terminal
14 AUDIO OUT terminals
15 INPUT 7 terminals
16 INPUT 6 terminals
17 RS-232C terminal
18 POWER (On/Off) button
19 Keypad control
Keypad control
JOG-KEY BASIC
FUNCTION
FUNCTION
DURING MENU
rCH UP r*
sCH DOWN s*
+VOL UP +*
–VOL DOWN –*
b
(BELOW 1 SEC) INPUT SELECT/ENTER
b(1 SEC
AND OVER) MENU RETURN/MENU
EXIT
* Repeat keys
*1This terminal can supply power for dongles. (Availability is depend on the specification of dongle).
*2The INPUT 5 and INPUT 8 terminals can both use the same analogue audio input terminal. However, the proper item must
be selected in the “Audio select” menu. (See page 9.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-40LE360X.
LC-3240LE360X_EN_G268.indd 5LC-3240LE360X_EN_G268.indd 5 8/5/2014 4:41:11 PM8/5/2014 4:41:11 PM

-6
Watching TV
HManual adjust
You can set some channel items manually.
1Repeat steps 1 to 3 in Auto search.
2Press a/bto select “Manual adjust”, and then
press ENTER.
3Press a/bto select your desired item, and then
press c/dto adjust the settings.
Item Description
Storage to
[1~99]
Save programme to your desired
channel number. Press Rto save.
Sound system Select the optimum sound system
(Broadcasting system) to receive.
(B/G, D/K, I, M)
Colour system Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Current CH Select the channel you want to edit.
• Selected channel will be automatically
reflected in the background.
Search Start searching from current channel.
• Instead of pressing c/dto adjust the
frequency, you can set by directly entering
the frequency number of the channel with
0 — 9.
Press Rto save.
Fine-tune Tune the frequency of the stored
channel to your desired position.
• Adjust while checking the background
picture as a reference.
Press Rto save.
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
HProgramme edit
Use this menu to set up a channel individually.
1Repeat steps 1 to 3 in Auto search.
2Press a/bto select “Programme edit”, and then
press ENTER.
3Press a/bto select the channel you want to
edit, and then press 1to 5on the remote control
if necessary or press RETURN to exit.
• As you toggle down the channels, each channel is
immediately reflected in the background when you press
ENTER.
1(Erase programme)
Channels can be erased individually.
Press 1to erase the selected channel.
2(Label)
You can change channel names individually.
Maximum 5 alphanumerics can be input.
Press 2to start labelling.
Press a/b/c/dto select a character, and
then press
2 again or ENTER to save.
3(Sort)
Channel positions can be sorted freely.
Press 3to select the channel you want to move.
Press a/bto move it to the desired position,
and then press
3 again or ENTER to save.
4(Skip)
Channels with “Skip” set to “On” are passed
over when using CHr/seven if selected
while watching the image from the TV.
Press 4to skip the selected channel.
Press 4again to cancel the skip.
5(Lock)
You can block the viewing of any selected
channel.
Password must be set first to allow “ ” to
function.
• See page 8 for setting a password.
Press 5to lock the selected channel.
Press 5again to unlock the locked channel.
On-Screen Display Menu
Selecting a preset AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Picture) and “ ”
(Audio).
3Press a/bto select “AV mode”, and then press
ENTER.
Selected item Description
STANDARD*1For a highly defined image in a normally
bright room.
MOVIE For a movie.
PC For PC (Available only when inputting
an HDMI or PC signal).
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(FIXED)
Changes the image and sound settings
to the factory preset values. No
adjustments are allowed.
NOTE
*1ENERGY STAR qualification is based on AV mode
“STANDARD (ENERGY STAR)”.
• You can select a different AV mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
Menu operation
1Press MENU and the MENU screen displays.
2Press c/dto select the desired menu.
(Programme setup, Picture, Audio, ECO, Setup,
Option)
3Press a/bto select the desired menu item.
Press ENTER to proceed if necessary.
4Press a/bor c/dto select the desired item or
adjust the item to the desired level. Press ENTER
if necessary.
5Press RETURN as necessary to return to the
previous MENU. Press MENU to exit the MENU.
Programme setup
Digital setting
You can reconfigure DTV services settings
automatically or manually.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Programme setup).
3Press a/bto select “Digital setting”, and
then press ENTER. If you have already set the
password, enter it here.
• See page 8 for setting a password.
4Press a/bto select the desired menu item, and
then press ENTER.
HAuto search
Use this menu to add new services automatically
after auto installation has been completed.
HManual search
Add new services within a specified frequency band.
• Press
c/dto select the frequency and then press ENTER.
Analogue setting
You can reconfigure the TV channel settings
automatically or manually using Auto search,
Manual adjust or Programme edit.
HAuto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Programme setup).
3Press a/bto select “Analogue setting”, and
then press ENTER. If you have already set the
password, enter it here.
• See page 8 for setting a password.
4Press a/bto select “Auto search”, and then
press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
LC-3240LE360X_EN_G268.indd 6LC-3240LE360X_EN_G268.indd 6 8/5/2014 4:41:12 PM8/5/2014 4:41:12 PM

-7
Selected item Description
Cinema 16:9 For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Dot by Dot Displays an image with the same
number of pixels on the screen (only
when receiving a 1080i/1080p signal for
LC-40LE360X).
Underscan Display with an Underscan image only
when receiving a 720p/1080p/1080i
signal (only for LC-32LE360X)/a 720p
signal (only for LC-40LE360X). Display
with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
Just scan Keeps the original aspect ratio and
enlarges the picture as much as
possible.
Auto Keeps the original aspect ratio based
on source information and enlarge the
picture as much as possible.
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
• “Auto”, “16:9”, “4:3” and “Just scan” can be selected only
during video playback in “Movie mode” of USB Media
Player.
HEagle View*
“Eagle View” technology produces a sharp picture
from the original moving picture. (“On”, “Off”)
HAquoMotion Lite*
“AquoMotion Lite” technology provides superior
solutions for display picture quality removing motion
blur. (“Advanced”, “High”, “Off”)
*
NOTE
• This effect is greater on fast moving images.
• This function will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred or flickering, set to “Off”.
Audio menu
HSound adjust
Selected item cbutton dbutton
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
HSRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the
same as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects
from the “Audio” setting.
Selected item Description
On
SRS TruSurround HD™ creates a high
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround
sound.
Off Outputs the normal sound.
HBass enhancer
This function allows you to enjoy bass-enhanced
sound.
Selected item Description
On Bass enhancer function is on.
Off Outputs the normal sound.
NOTE
• If distorted bass sound is heard, set to “Off”.
HClear voice
This function emphasises speech against
background noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
• For resetting all “Sound adjust” items to the factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
ECO menu
HNo signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
HNo operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
Picture menu
HPicture adjust
Adjustment items
Selected item cbutton dbutton
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness
For more brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
reddish
Skin tones become
greenish
Sharpness For less sharpness
For more sharpness
NOTE
• “Picture adjust” cannot be changed during “DYNAMIC
(FIXED)” mode.
• For resetting all “Picture adjust” items to factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
HDNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Auto, High, Low, Off)
HWide mode
You can manually select the size of a picture
appeared on your screen.
Selectable picture size varies with the type of signal
received.
Press a/bwhile the wide mode menu displays on
the screen.
• As you toggle down the options, each mode is immediately
reflected on the TV.
Selected item Description
Normal/4:3 For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.
Panorama In this mode the picture is progressively
stretched toward each side of the
screen.
Full/16:9 For 16:9 squeeze pictures.
On-Screen Display Menu
LC-3240LE360X_EN_G268.indd 7LC-3240LE360X_EN_G268.indd 7 8/5/2014 4:41:12 PM8/5/2014 4:41:12 PM

-8
Selected item Description
Off Cancel the blocking.
Age xx years
Select desired age to block.
(Example) If age 14 is selected,
programmes rated for ages of 15 or
more are blocked.
No block Cancel the blocking.
General and
above (G) Content is not offensive to most viewers.
Parental
guidance and
above (PG)
Content is such that parents may
not want their children to view the
programme.
Mature and
above (M)
Mature audience only. This programme
is specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Mature adult
and above
(MA)
Mature adult only. This programme is
specifically designed to be viewed by
adults and therefore may be unsuitable
for children under 15.
Adult violence
and above (AV)
Not for children under age 15. Strong
elements of sex and/or violence.
Restricted and
above (R)
Not for children under age 18. Strong
elements of sex and/or violence.
Parental
guidance
recommended
and above
(PGR)
Programme is suited to more mature
viewers.
Adults only
and above
(AO)
Adults only. This programme contains
material of an adult nature handled
in such a way that is unsuitable for
children.
Block all Block all programmes.
HHDMI auto view (HDMI input mode only)
Selected item Description
Enable/
Disable
Set whether or not to use the Auto
Selection of WIDE MODE based on
signal recognition received from the
HDMI signal.
HLink operation
Using the HDMI CEC (Consumer Electronics Control)
protocol, with Link operation you can interactively
operate compatible system equipment (e.g. DVD),
by connecting the link operation-compatible devices
with HDMI-certified cables to the TV.
Link operation allows you to operate the HDMI-
connected equipment and the TV by using a single
remote control unit. (On, Off)
HAudio return channel
If this function is set to “Auto”, the TV can send
audio data for video content shown on the TV
to a connected audio device with just one ARC-
compatible cable. Using this function eliminates the
need to use a separate digital or analogue audio
cable. (Auto, Off)
Connection for using “Audio return channel”
You need to use ARC-compatible cables/devices
and connect to the INPUT 1 terminal to activate this
function.
NOTE
• The ARC (Audio Return Channel) function works only when
using the INPUT 1 terminal.
• When you use an audio system compatible with the ARC
function of the TV, you do not need to connect an optical
audio cable to the TV.
HAuto wide (DTV input mode only)
The “Auto wide” allows the TV to switch automatically
among the different picture size. (On, Off)
NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no aspect ratio information, the function will not
work even if enabled.
H4:3 mode (DTV input mode only)
The 4:3 mode allows you to select between “Full”
and “Normal”.
Selected item Description
Full Wide image without side bars.
Normal Normal range keeping 4:3 or 16:9
aspect ratio.
4:3 screen types
4:3 mode “Full” 4:3 mode “Normal”
HQuick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Selected item Description
On The TV quickly starts up from standby,
more of power consumption is required
during standby.
Off
Power consumption is less than 1W.
HLanguage
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesia.
HText language
Select from among 5 kinds of language: West
Europe, East Europe, Cyrillic, Arabic and Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
HDigital setup
Selecting the language
Set up to two preferred multi audio languages to
display if the audio languages are available.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Setup).
3Press a/bto select “Digital setup”, and then
press ENTER.
4Press a/bto select “Digital audio language”, and
then press ENTER.
5Press a/bto select “1st language” or “2nd
language”.
6Press c/dto select the desired language.
NOTE
• If audio for the selected languages is not included in
a received broadcast, audio will not be output for that
language.
Setup menu
HChild lock (ATV and DTV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1Repeat steps 1 and 2 in Menu operation.
2Press a/bto select “Child lock”, and then press
ENTER.
3If you have already set the password, enter it here.
4Press a/bto select “Change password”, and
then press ENTER.
5Enter the 4-digit number as a password using
0 – 9.
6Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• To view a locked channel, you must enter a password.
When you select a locked channel, “Child lock has been
activated” is displayed.
• Press ENTER to display the password input window.
Clearing the password
Allows you to clear your password.
1Repeat steps 1 to 3 in Setting a password.
2Press a/bto select “Clear password”.
3Press c/dto select “Yes”, and then press
ENTER.
Parental rating
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
1Repeat steps 1 to 3 in Setting a password.
2Press a/bto select “Parental rating”, and then
press ENTER.
3Press a/bto select your desired rating, and then
press ENTER.
On-Screen Display Menu
LC-3240LE360X_EN_G268.indd 8LC-3240LE360X_EN_G268.indd 8 8/5/2014 4:41:13 PM8/5/2014 4:41:13 PM

-9
Switching subtitle languages (DVB Subtitle)
Each time you press [on the remote control,
the subtitle switches when the broadcast contains
subtitle information.
Set “Hearing impaired” to “On”
(Hearing impaired) 1st language
2nd language
Off ••••••••
Set “Hearing impaired” to “Off”
1st language 2nd language
(Hearing impaired)
Off ••••
NOTE
• This function is valid only if broadcaster is transmitting
multilingual subtitles.
Time zone
This function enables you to select your local time
zone.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Setup).
3Press a/bto select “Digital setup”, and then
press ENTER.
4Press a/bto select “Time zone”, and then press
ENTER.
5Press c/dto select the desired time zone.
NOTE
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
• Time zone differ depending on the selected country.
HIdentification
You can check the current version of the software on
the screen.
HReset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as “Picture”,
“Audio” and “Programme setup” will be reset to the factory
preset values.
Audio description (DTV input mode only)
This function allows you to adjust volume output of
audio description if the TV receives a signal including
audio description.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Setup).
3Press a/bto select “Digital setup”, and then
press ENTER.
4Press a/bto select “Audio description”, and
then press ENTER.
5Press c/dto select the volume.
Switching the multi audio languages
Each time you press MPX on the remote control, the
audio language switches.
1st audio language 1st audio language
+AD (if available)
2nd audio language
+AD (if available) 2nd audio language
••••
NOTE
• This function is valid only if broadcaster is transmitting audio
description.
Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Setup).
3Press a/bto select “Digital setup”, and then
press ENTER.
4Press a/bto select “Subtitle”, and then press
ENTER.
5Press a/bto select “1st language” or “2nd
language”.
6Press c/dto select the desired language.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
Option menu
HOutput volume select
Allows you to select what controls the audio output.
Selected item Description
Fixed • Sound via speakers is adjusted with
VOLk/lon the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
Variable • Sound via the AUDIO OUT terminal
is adjusted with VOLk/lon the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• When “Output volume select” is set to “Variable”, all Audio
menu item cannot be adjusted.
HInput select
For setting the signal type of external equipment.
Input source Selectable item
INPUT6
COMPONENT, VIDEO
HAudio select (HDMI input mode only)
You must select HDMI+Analogue if uses the AUDIO
IN (R/L) jack for analogue audio input when using
INPUT 5 (HDMI) terminal.
Option Description
HDMI (Digital) Select “HDMI (Digital)” if the Devices
(DVD, Blu ray Player, Set Top Box or
etc.) is connected using HDMI cable to
INPUT 5 (HDMI) terminal.
HDMI+
Analogue
Select “HDMI+Analogue” if the Devices
(PC or etc.) is connected using DVI/
HDMI convert cable to INPUT 5 (HDMI)
terminal and AUDIO IN (R/L) jack is used
to input Analogue Audio Signals.
HDMI (Digital)
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO - L
R-AUDIO - L
R-AUDIO - L VIDEO/YP
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
5
INPUT 5
DVD player/PC
HDMI+Analogue
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO - L
R-AUDIO - L
R-AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
5
8
AUDIO IN
5
INPUT 5
PC
HAuto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
HDigital audio output
This function allows you to select your favourite audio
output system. (PCM, Auto, Off)
HSpeaker selection
You can choose to listen to the external amplifier
audio only. (On, Off)
NOTE
• This function only available when “Link operation” is set to
“On”.
• You need to use CEC compatible amplifier to control
external speaker volume.
HAudio only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item Description
On Audio is output without screen image.
Off Both screen images and audio are
output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the “Audio only”
function is set to “Off”.
HColour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
On-Screen Display Menu
LC-3240LE360X_EN_G268.indd 9LC-3240LE360X_EN_G268.indd 9 8/5/2014 4:41:13 PM8/5/2014 4:41:13 PM

-10
HFine sync. (PC input mode only)
Input signal
• Some input signals may have to be registered
manually to display properly.
• The pairs of input signals (resolutions) in the list
below are not distinguishable when received.
In such case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
1280 g768 1360 g768
Adjusting the PC image automatically
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched).
It may fail when an input PC image is solid (low contrast).
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto
sync. In some cases, how
ever, manual adjustment is
needed to optimise the image.
Selected item Description
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
Clock Adjusts when the image flickers with
vertical stripes.
Phase Adjusts when characters have low
contrast or when the image flickers.
NOTE
• For resetting all “Fine sync.” items to the factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
HDivX (R) VOD
Please see USB Media Player on page 15.
HDemo (store mode only)
When “Store mode” is set to “On”, after all the
settings are completed, the Feature demo screen is
displayed if there is no operation for 30 seconds.
HSystem data
USB data transfer
This function allows you to update the TV to the
latest software using a USB device. You must
update the software through the USB terminal.
Software update (OAD)
• This function is for automatically download the
data for the version update software over digital
broadcasts when the “OAD setup” is set to “On”.
• To download, follow the instructions when the
download message appears during a digital
broadcast.
• Once the software upgrade is done, the TV will
automatically go to standby state with Red LED.
OAD scan
• This function is for manually download the data
for the version update software over digital
broadcasts.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the
upgrade to fail. If problem arises ask a qualified
service personnel before the software upgrade period
expires.
On-Screen Display Menu
EPG RADIO
ATV/DTV
EP
G
RADI
O
ATV
/
DTV
GUIDE INFO
Programme Guide
You can check the current channel list of DTV/ATV
respectively.
1Press GUIDE to display the programme channel
list.
2Press a/bto select your desired programme,
and then press ENTER.
3Press RETURN or GUIDE to exit.
Info
While watching DTV you can check the extended
programme information on the screen using INFO
on the remote control.
General INFO screen
• Station name
• Title
• Date
• Time for the current programme
• Video system
• Audio system
• Parental rating
NOTE
• If there is more information, pressing a/ballows you to go
to the next page or return to the previous page.
• You can cancel this info by pressing INFO.
ATV/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
DISPLAY
EPG
HDMI
INFOGUIDE
DI
S
PLAY
E
P
G
HDMI
INF
O
GU
ID
E
ATV/DTV
RADIO
ATV/DTV: Press to switch between ATV and DTV
mode. After switching from ATV or DTV, radio or
external input mode to ATV and DTV mode, the TV
jumps to the most recently viewed ATV and DTV
channel.
RADIO: Press to switch from DTV to radio mode.
The TV will jumps to the most recently tuned radio
channel.
When you watch the TV for the first time
When the TV powers on for the first time after
purchase, perform the auto installation.
Direct Button Operation
LC-3240LE360X_EN_G268.indd 10LC-3240LE360X_EN_G268.indd 10 8/5/2014 4:41:15 PM8/5/2014 4:41:15 PM

-11
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Stereo mode
B/G
STEREO
BBC1
B/G
MONO
PAL PAL
ATV AT V
BBC1
When receiving a bilingual signal
Each time you press MPX, the mode switches
among CH A, CH B and CH AB.
Bilingual mode
B/G
CH A
BBC1
B/G
CH B
PAL PAL
ATV AT V
BBC1
B/G
CH AB
PAL
ATV
BBC1
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
B/G
MONO
PAL
ATV
BBC1
NOTE
• “BBC1”, “01” and “PAL” are tentative network name,
channel and colour system.
EPG
What is an EPG?
An “EPG (Electronic Programme Guide)” is a
programme schedule, which is displayed on the TV
screen. The EPG is broadcasted together with DTV.
The TV screen shows the EPG when the viewer
presses EPG on the remote control, provided that
the TV is receiving the digital broadcasting signal.
The EPG enables you to search for a programme, do
timer view the programme schedule in detail.
Basic Operation
HDisplay the EPG screen
1 Press EPG.
INFOGUIDE
ATV/DTV
RADIO
I
NF
O
GU
IDE
A
TV
/
DTV
R
ADI
O
EPG
33
PROGRAMME GUIDE TIME
HD Monosco
01 Jan 20:01
Manual adjust
10 HD Monosco
Color Bar 576i
11 Color Bar 5...
Monosco 576–1
12 Monosco 576...
Monosco 576–2
13 Monosco 576...
Schedule
INFO
GRemind B
ENTER RETURN
Y
2 Press ato select PROGRAMME GUIDE/TIME.
3 Press c/dto select the desired channel/time
span.
HClose the EPG screen
4 Press EPG again or RETURN to exit.
NOTE
• For “New Zealand delivery model”, the EPG screen and
operation differ due to the use of MHEG EPG. The EPG
screen and operation vary depending on the broadcasts.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1To watch the analogue TV, select “ATV” from
“Auto installation” in Programme setup menu.
(See page 5.)
2After setting the channels, you can select a
channel using CHr/sor 0–9on the remote
control unit. (See page 4.)
DTV (Digital TV)
When the TV accesses to DTV mode for the first
time, you need to run the auto search. To scan all
available services in your area, follow the procedures
below.
1To watch the DTV broadcasts, select “DTV” from
“Auto installation” in Programmme setup menu.
(See page 5.)
2After setting the channels, you can select a
channel using CHr/sor 0–9on the remote
control unit. (See page 4.)
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
ATV/DTV
A
TV
/
DTV
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
Stereo mode
B/G
STEREO
BBC1
B/G
MONO
PAL
NICAM
PAL
ATV AT V
BBC1
When receiving a bilingual signal
Each time you press MPX, the mode switches
among NICAM CH A, NICAM CH B, NICAM CH AB
and MONO.
Bilingual mode
B/G
CH A
BBC1
B/G
CH B
PAL
NICAM
PAL
NICAM
ATV AT V
BBC1
B/G
MONO
BBC1
B/G
CH AB
PAL PAL
NICAM
ATV AT V
BBC1
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
B/G
MONO
BBC1
B/G
MONO
PAL
NICAM
PAL
ATV AT V
BBC1
Direct Button Operation
LC-3240LE360X_EN_G268.indd 11LC-3240LE360X_EN_G268.indd 11 8/5/2014 4:41:16 PM8/5/2014 4:41:16 PM

-12
Colour adjustment and still
image
Allows you to adjust the colour tone of a still image.
1Press COLOUR ADJ. (FREEZE), the moving
image will be captured and colour adjustment
screen displays.
2Press a/b/c/dto adjust the colour to your
desired setting.
Button Description
aWhite with greenish tone.
bWhite with reddish tone.
cWhite with bluish tone.
dWhite with yellowish tone.
RReveal/hide the setting screen.
GSet adjustment to last user setting.
BClose the setting screen and unfreeze
image.
ENTER Save/exit setting.
NOTE
• The colour adjustment screen and still image will
automatically goes out after 30 minutes.
• Freeze/Colour adjustment function does not work in USB
Photo/Movie playback. It works for HDMI, composite/
component and VGA.
ECO mode
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item Description
ECO 1 Reduces the backlight brightness.
ECO 2 Reduces the backlight brightness more
than “ECO 1”.
ECO Off Normal setting of backlight brightness.
ECO status will be displayed on the channel
information window.
Reminder timer setting
You can schedule a reminder for future programmes.
Channel will automatically change on time as
scheduled.
1Press EPG.
2Press a/bto select the programme you want to
watch.
3Press Bto set reminder time.
4Press ENTER to save reminder timer.
• “Timer save success” will display.
NOTE
• “Timer overlay” will display if same time is set twice.
• “Timer past” will display if past time is set.
5Press ENTER to display the reminder schedule
list.
6Press RETURN or EPG to exit.
Viewing the reminder schedule list
1Press EPG.
2Press Yto display the reminder schedule list.
3Press a/bto display next or previous screen.
4Press RETURN or EPG to exit.
Cancelling the reminder timer setting
1Press EPG.
2Press Yto display the reminder schedule list.
3Press a/bto select a programme you want to
cancel.
4Press Rto delete a programme from reminder list.
5Press RETURN or EPG to exit.
Direct Button Operation Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.
Turning on and off Teletext
1Select a TV channel or external input source
providing the Teletext programme.
2Press mto display the Teletext.
3Each time you press m, the screen switches as
shown below.
TELETEXT
TELETEXT
NOTE
• If you select a programme with no Teletext signal,
“No Teletext available.” is displayed.
• The same message displays during other modes if no
Teletext signal is available.
• New Zealand delivery model can receive MHEG data
broadcasting.
Button functions
Buttons Description
CH (r/s)Increase or decrease the page number.
Colour (Red/
Green/Yellow/
Blue)
You can select a group or block
of pages displayed in the coloured
brackets at the bottom of the screen
by pressing the corresponding Colour
(Red/Green/Yellow/Blue) on the
remote control unit.
0 – 9 Directly select any page from 100 to 899
by using 0 – 9.
k(Reveal
hidden for
TELETEXT)
To reveal hidden information such as an
answer to a quiz.
3(Hold) To stop updating Teletext pages
automatically or release the hold mode.
[(Subtitle for
TELETEXT)
Display the subtitle during Teletext page.
• Subtitle will not be displayed when the
service does not contain subtitle information.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
Using a Smartphone with
the TV
This function enables you to connect the TV to a
smartphone that supports Mobile High-Definition
Link (MHL) using an MHL-compatible cable.
To connect the TV to your MHL-compatible
smartphone, be sure to use an MHL-compatible
cable (commercially available).
• You can view pictures and video on a large screen.
• You can play back music files.
DC5V 0.9A
MHL
2
MHL-compatible cable
INPUT 2 terminal (Rear side)
NOTE
• An MHL-compatible portable device is required to use this
function. Connect the device to the INPUT 2 terminal.
• This production incorporates MHL 2.
HAuto power on
When an MHL-compatible device is connected to
the TV, the TV turns on automatically.
• This function operates when “Link operation” is set to “On”.
(See page 8.)
HAuto input selection
When an MHL-compatible device is connected
while the TV is on, the input mode is selected
automatically.
• This function operates when “Link operation” is set to “On”.
(See page 8.)
HOperation using the remote control
The remote control of the TV can be used to operate
a portable device.
• a/b/c/d, ENTER, 0 – 9, etc.
• The operations vary depending on the connected
equipment and content being viewed.
• Colour (Red/Green/Yellow/Blue) may be available to
control play/pause/fast forward/back forward function.
• The illustrations used throughout this manual are based
on LC-40LE360X.
LC-3240LE360X_EN_G268.indd 12LC-3240LE360X_EN_G268.indd 12 8/5/2014 4:41:16 PM8/5/2014 4:41:16 PM

-13
PC compatibility chart
Resolution Horizontal
Frequency
Vertical
Frequency
VESA
Standard
Analogue
(D-Sub) Digital (HDMI)
VGA 640 g480 31.5 kHz 60 Hz ✔✔✔
SVGA 800 g600 37.9 kHz 60 Hz ✔✔✔
XGA 1024 g768 48.4 kHz 60 Hz ✔✔✔
WXGA 1360 g768 47.7 kHz 60 Hz ✔✔✔
✴ 1080P ✴ 1920 g1080 67.5 kHz 60 Hz ✔✔
✴: only for LC-40LE360X
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Corporation.
PC Control of the TV
• When a programme is set, the TV can be controlled from
the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume
can be adjusted and various other adjustments and settings
can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially
available) to the Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the
PC to match the communications conditions of the
TV. The communications settings of the TV are as
follows:
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
Stop bit: 1 bit
Flow control: None
Communication procedure
Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Command format
Eight ASCII codes eCR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, space, ?
Parameter
Input the parameter values, aligning left, and fill with
space(s) for the remainder. (Be sure that four values
are input for the parameter.)
When the input parameter is not correct, “ERR”
returns. (Refer to “Response code format”.)
a30
0009
0
Response code format
Normal response
OK
Return code (0DH)
Problem response (communication error or incorrect
command)
ERR
Return code (0DH)
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POWER SETTING P O W R 0 ___ POWER OFF (STANDBY)
INPUT SELECTION
ITGD
____
INPUT SWITCHING (TOGGLE)
ITVD
____
ATV (CHANNEL FIXED)
IDTV____ DTV (CHANNEL FIXED)
IAVD
*___
INPUT 1 – 9 (1 – 9)
CHANNEL
DCCH **__ ATV DIRECT CHANNEL (1 – 99)
CHUP ____ ATV CHANNEL UP
CHDW____ ATV CHANNEL DOWN
DTVD***_DTV DIRECT CHANNEL (1 – 999)
DTUP____ DTV CHANNEL UP
DTDW____ DTV CHANNEL DOWN
AV MODE SELECTION
AVMD0___ TOGGLE
AVMD1___ STANDARD
AVMD2___ MOVIE
AVMD5___ DYNAMIC
AVMD6___ DYNAMIC (FIXED)
AVMD7___ PC
VOLUME V O L M ***_VOLUME (0 – 100)
POSITION
HPOS ***_H-POSITION (PC) (000 – 180)
VPOS ***_V-POSITION (PC) (000 – 120)
CLCK***_CLOCK (000 – 180)
PHSE ***_PHASE (000 – 015)
WIDE MODE
WIDE0___ TOGGLE (AV)
WIDE1___ NORMAL (AV)/4:3 (USB – MOVIE)
WIDE2___ ZOOM 14:9 (AV)
WIDE3___ PANORAMA (AV)
WIDE4___ FULL (AV)/16:9 (USB – MOVIE)
WIDE5___ CINEMA 16:9 (AV)
WIDE6___ CINEMA 14:9 (AV)
WIDE7___ NORMAL (PC)
WIDE9___ FULL (PC)
WIDE10__ DOT BY DOT (PC)
WIDE11__ UNDERSCAN
WIDE12__ AUTO (USB – MOVIE)
WIDE13__ JUST SCAN (USB – MOVIE)
MUTE
MUTE0___ TOGGLE
MUTE1___ MUTE ON
MUTE2___ MUTE OFF
SRS TS HD
ACSU0 ___ SRS TS HD TOGGLE
ACSU1 ___ SRS TS HD ON
ACSU2 ___ SRS TS HD OFF
AUDIO CHANGE ACHA____ TOGGLE
SLEEP TIMER
OF TM0 ___ OFF
OF TM1 ___ SLEEP TIMER 30 MIN
OF TM2 ___ SLEEP TIMER 1 HOUR
OF TM3 ___ SLEEP TIMER 1 HOUR 30 MIN
OF TM4 ___ SLEEP TIMER 2 HOUR
OF TM5 ___ SLEEP TIMER 2 HOUR 30 MIN
TEXT TEXT0___
TEXT OFF
TEXT1___ TEXT CHANGE TOGGLE
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
Using a PC
LC-3240LE360X_EN_G268.indd 13LC-3240LE360X_EN_G268.indd 13 8/5/2014 4:41:16 PM8/5/2014 4:41:16 PM

-14
HSelecting modes
Photo mode Music mode Movie mode
USB
1Press INPUT to select the “USB” mode.
2Press c/dto select “Photo mode”, “Music
mode” or “Movie mode”, and then press ENTER.
3Press c/dto select your USB directory, and
then press ENTER.
4Press a/b/c/dto select the desired folder, and
then press ENTER.
NOTE
• “Wide mode” is fixed during “Photo mode” and “Music
mode”.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• A file name with more than 10 characters may not be
displayed all (depending on the character set).
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• The compatibility of USB HDDs may not be guaranteed.
PHOTO slideshow
C:\Photo 1/2
Back
Fireworks.jpg
Switzerland.jpg Japan-hokkaid.. Island.jpgSki Action.jpg
WxH:
1300 X 822
Size:
789 KBytes
Date:
2011 / 08 / 04
Time:
10 : 12 :12
Ski Action.jpg
When you press PHOTO, the TV screen will
automatically play the photo slideshow.
• If there is no USB drive, the TV will switch to Selecting
modes screen.
• Photo slideshows will autoplay only for the photos located
on the top layer of USB drive. To enable autoplay for
photos located in a subfolder, you need to manually select
the subfolder, and then press PHOTO.
You can select the duration for each photo to display,
and also the duration for the slideshow to play.
Duration for photos to display
1 minute10 seconds5 seconds3 seconds
Duration for slideshow to play
Continuous3 hour1 hour
• The TV will automatically power off after the
selected playtime ends.
NOTE
• Background music will autoplay during a slideshow only if
the music file is located in the same folder with the photo
files.
• If you want to stop the photo slideshows, press RETURN
to exit.
Control panel for photo/music/movie mode operations
• Press Bto display the control panel below.
Button/
menu Description Photo Music Movie
ENTER When selecting a folder icon: Enter this directory.
When selecting a thumbnail: Play the selected file. ✔✔✔
Play/Pause. ✔✔✔
Rewind. Each time you press rewind, the speed will change
(2x, 4x, 8x, 16x). –✔✔
Fast-forward. Each time you press fast-forward, the speed will
change (2x, 4x, 8x, 16x). –✔✔
Play the previous file. ✔✔✔
Play the next file. ✔✔✔
RETURN/
Stop playback and return to the list of files. ✔✔✔
Loop. Each time you press ENTER, the mode will switch between
Repeat NoneRepeat AllRepeat 1 ✔✔✔
Play/cancel the background music. ✔––
Mute. Press ENTER to toggle between mute and unmute. –✔–
Two loop. Press ENTER to set the current playback time starting
point. Press ENTER to set the loop end of the current playing time
and start loop playback. Press ENTER button to cancel the loop.
––
✔
Show playlists. Select a file from the playlists to start playback. ✔✔✔
Display information about the file. ✔✔✔
Slow-forward.
Each time you press slow-forward, the speed will change. ––
✔
Single frame-forward.
Each time you press ENTER, the picture will change to the next still
picture.
––
✔
Set time for music/movie playback. –✔✔
Rotate clockwise 90º. ✔––
Rotate counterclockwise 90º. ✔––
Zoom in an image. Select to display larger image size. ✔–✔
Zoom out an image. Select to display smaller image size. ✔–✔
Pan image up, down, left or right after you zoom in. Press ENTER
to exit. ✔–✔
Select playback length of a slideshow. ✔––
Select photo display interval. ✔––
Wide mode.
You can manually select the size of a picture appeared on your
screen.
––
✔
NOTE
• Files in folder which are not related to a selected mode cannot be accessed.
• “Unsupported file” alert will pops up for a selected file of invalid format.
USB Media Player
LC-3240LE360X_EN_G268.indd 14LC-3240LE360X_EN_G268.indd 14 8/5/2014 4:41:17 PM8/5/2014 4:41:17 PM

-15
DivX®setup
This is the function to confirm your registration code.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Option).
3Press a/bto select “DivX ( R ) VOD”, and then press ENTER.
• Copy the 10 digit code down.
DivX ( R ) VOD Register
You need to visit the DivX main page to register your TV. Please follow the online instruction to create DivX
account and DivX registration video download.
Your registration is complete when you play the DivX registration video on TV.
DivX ( R ) VOD Deregister
You can find the deregistration code (8~10 digits). Please use this code to deactivate on DivX website.
NOTE
• Visit http://vod.divx.com for more information about DivX®VOD.
List of files compatible with USB mode
USB device/File system USB Memory/FAT/FAT32/NTFS
Photo file format JPEG (.jpg)/PNG/BMP
Music file format (Files may not be
playable depending on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,
192 k, 224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
Video file format
File extension Container Video
*.avi AVI
DivX 3.11/4.12/5.x/6
H.264
MPEG4
Motion Jpeg
*.mkv MKV
DivX 3.11/4.12/5.x/6
H.264
MPEG4
*.mp4
*.mov MP4
DivX 3.11/4.12/5.x/6
H.264
MPEG4
*.vob MPEG2 – PS MPEG2
*.mpg/*.mpeg MPG
MPEG
MPEG2
MPEG1
*.ts/*.trp/*.tp TS H.264
MPEG2
*.asf ASF DivX 3.11/4.12/5.x/6
VC-1
*.divx DivX DivX 3.11/4/4.12/5.x/6
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem Possible Solution
• No power. • Check if you pressed POWER on the remote control unit. (See page 5.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 5.)
• Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
In this case, operate the unit after first turning the power off the TV or unplugging the AC
cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does
not operate.
• Is battery inserted with polarity (e, f) aligned? (See page 4.)
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light shining on the remote control sensor?
• Picture is cut off. • Is the image position correct? (See page 10)
• Are screen mode adjustments such as picture size made correctly?
(See pages 7 and 10.)
• Strange colour, light
colour, or dark, or colour
misalignment.
• Adjust the picture tone. (See page 7.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 6, 9.)
• Check the input signal setting. (See page 10.)
• Check the HDMI auto view setting. (See page 8.)
• Power is suddenly turned
off.
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See page 7.)
• Is the sleep timer set? (See page 4.)
• No picture. • Is the connection to external equipment correct? (See page 3.)
• Has the input signal setup been performed correctly after connection? (See page 10.)
• Is the correct input selected?
• Is the “Picture adjust” correct? (See page 7.)
• Is the antenna connected properly? (See page 3.)
• Is “On” selected in “Audio only”? (See page 9.)
• No sound. • Is the volume too low? (See page 4.)
• Make sure that headphones are not connected.
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV’s performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
f20°C to e60°C.
USB Media Player
LC-3240LE360X_EN_G268.indd 15LC-3240LE360X_EN_G268.indd 15 8/5/2014 4:41:17 PM8/5/2014 4:41:17 PM

-16
Specifications
Item Model LC-32LE360X LC-40LE360X
LCD panel 80 cm 100 cm
Resolution 1,049,088 pixels (1366 g768) 2,073,600 pixels (1920 g1080)
Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV function TV-standard Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1NTSC: M
Digital DVB-T
Receiving
channel
VHF/UHF 44.25—863.25 MHz
CATV S1—S41 ch (including Hyperband)
TV-tuning system Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G MTS: M
Viewing angles H : 176º V : 176º
Audio amplifier/Speakers 10 W g2 / 5 g9 cm 2pcs
Terminals Antenna input UHF/VHF 75 qDIN type
INPUT 1 (HDMI/ARC) HDMI (HDMI input)
INPUT 2 (HDMI/MHL) HDMI (HDMI input)
INPUT 3/INPUT 4/INPUT 5
(HDMI) HDMI (HDMI input)
INPUT 6 VIDEO in, AUDIO in, COMPONENT in
INPUT 7 VIDEO in, AUDIO in
INPUT 8 (PC) 15 pin mini D-sub
AUDIO OUT AUDIO out
AUDIO IN (HDMI 5/INPUT
8 (PC))
3.5 mm jack*1
USB 1/ USB 2 USB
OUTPUT USB
RS-232C 9 pin D-sub male connector
DIGITAL AUDIO OUTPUT Optical Digital Audio Output
Headphone 3.5 mm stereo
OSD language English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/
Thai/Vietnamese/Indonesia
Power requirement AC 110 — 240 V, 50/60 Hz
Power consumption 63 W (0.5 W Standby) 89 W (0.6 W Standby)
Dimensions without stand 739 (W) g440 (H) g93 (D) mm 910 (W) g525 (H) g92 (D) mm
with stand 739 (W) g485 (H) g210 (D) mm 910 (W) g571 (H) g225 (D) mm
Weight without stand (with stand) 6.0 kg (6.9 kg) 8.4 kg (10.0 kg)
Operating temperature 0°C — 40°C
*1The HDMI 5 and INPUT 8 terminals can both use the same audio input terminal.
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
• Specification may differ depending on the selected country.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the
following tip-resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
1Fix the product with the 2 clamps (supplied), using
the screws (supplied). Cup hook
(commercially available)
Clamps (supplied)
View from the top
Tie (commercially
available)
Wall
Screws for attaching clamps (supplied)
2Fix the TV to the wall using extra strong ties
(commercially available).
Fixing the TV to the table
1Transfer the product to the table where you intend to fix the TV.
2Fix the TV to the table by the prevent angle with the screws (commercially available).
• Use the screws (commercially available) whose shape is compatible with the prevent angle.
USB1
DC5V1.5A
DC5V0.9A
MHL
3
4
5
2
POWER
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
5
8
AUDIOIN
DIGITAL
AUDIO
OUTPUT
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
6
INPUT6
7
INPUT7
AUDIOOUT
R-AUDIO - L
R-AUDIO- L
R-AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
Screws
(commercially
available)
Table Prevent angle
(supplied)
CAUTION
• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the
product’s weight. The table should be set where it will not be overturned.
• The illustrations used throughout this manual are based on LC-40LE360X.
LC-3240LE360X_EN_G268.indd 16LC-3240LE360X_EN_G268.indd 16 8/5/2014 4:41:17 PM8/5/2014 4:41:17 PM

-17
Dimensional drawings
92
910
879.8
487
571
313
599
86
525
225
200
200
USB1
DC5V1.5A
DC5V0.9A
MHL
2
3
4
5
OUTPUT
DC5V1.5A
INPUT4
INPUT5
USB2
DC5V0.5A
POWER
5
8
AUDIOIN
ANALOGUE
RGB(PC)
ARC
RS-232CIOIOI
8
INPUT8
1
INPUT1
DIGITAL
AUDIO
OUTPUT
6
INPUT6
7
INPUT7
AUDIOOUT
R- AUDIO - L
R- AUDIO - L
R- AUDIO - L VIDEO/Y P
B
(C
B
)P
R
(C
R
)
COMPONENT/AVINPUT
VIDEO
Unit : mm
100
100
477
440
739
700.4
394.8
265.6
93
86
210
485
LC-32LE360X LC-40LE360X
LC-3240LE360X_EN_G268.indd 17LC-3240LE360X_EN_G268.indd 17 8/5/2014 4:41:18 PM8/5/2014 4:41:18 PM

-18
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1Press MENU to display the MENU screen, and
then press c/dto select “ ” (Setup).
2Press a/bto select “Child lock”, and then press
ENTER and the password input screen display.
3If you enter “3001” using 0 – 9, the “Child lock”
setting menu will be displayed.
4Enter the 4-digit number as a password using
0 – 9. The new password is now set.
DISPLAY
ATV/DTV
DI
S
PLA
Y
A
TV
/
DTV
The Password is .
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
Note
LC-3240LE360X_EN_G268.indd 18LC-3240LE360X_EN_G268.indd 18 8/5/2014 4:41:21 PM8/5/2014 4:41:21 PM