Sharper Image Baby Bath OQ005 User manual

Baby Bath™
Thermometer
+ Wireless Baby
Monitor
OQ005 Instructions
Read and save these instructions.
OQ005 IM_v1 1105-PB 0216.indd 1 2/17/06 1:51:53 PM

Table of Contents
Baby Bath™Thermometer ..........................................................5
This is Not a Toy ........................................................................5
Warnings ...................................................................................5
Precautions................................................................................6
General Instructions...................................................................7
Front of the Product ...............................................................7
Back of the Product................................................................8
Batteries.................................................................................9
Power On/Off ........................................................................9
Basic Functions ....................................................................10
Technical Specifications........................................................13
Baby Monitor with Indoor Temperature ...................................14
Precautions..............................................................................14
Warnings .................................................................................16
General Instructions.................................................................17
Front View – “Parent” Unit...................................................17
OQ005 IM_v1 1105-PB 0216.indd 2 2/17/06 1:51:54 PM

Table of Contents
Back View – “Parent” Unit ...................................................18
LCD – “Parent” Unit ............................................................19
Front View – “Baby” Unit.....................................................20
Back View – “Baby” Unit .....................................................21
Power Requirements ............................................................22
Neck Lanyard – “Parent Unit................................................24
Power On/Off ......................................................................25
Setup ...................................................................................25
Selecting Channels – “Baby” Unit ........................................26
Night-Light – “Baby” Unit ....................................................26
Volume ................................................................................26
Sound Light Indicators..........................................................27
Connection Signal Status ......................................................27
Lost-Link Alarm....................................................................27
Temperature Display ............................................................28
Clock/Alarm.........................................................................28
Set Clock/Voice-Activation Sensitivity Level ..........................28
OQ005 IM_v1 1105-PB 0216.indd 3 2/17/06 1:51:54 PM

Table of Contents
Setting the Alarm..................................................................29
Feeding Timer......................................................................30
Backlight..............................................................................31
Reset....................................................................................32
Specifications.......................................................................32
Statement of FCC Compliance .............................................34
FCC Label Compliance Statement ........................................35
OQ005 IM_v1 1105-PB 0216.indd 4 2/17/06 1:51:54 PM

This is Not a Toy
Product is tested and is in compliance with toy safety standard
EN71. IT IS NOT meant to be used as A TOY and is not suitable
for children under 3 years.
Please retain this instruction manual for future reference.
Warnings
• This product should only be operated by an adult and should
not be used as a toy for children.
• This product is not intended and should not be used as a re-
placement for responsible adult supervision; it only acts as
a support for your child-caring purpose. Any type of liability
beyond statutory warranty regulations or resulting from
improper use of this product and/or use not in accordance
with product warnings, precautions and instructions is excluded.
Baby Bath Thermometer
5
OQ005 IM_v1 1105-PB 0216.indd 5 2/17/06 1:51:54 PM

This unit is engineered to provide you with years of satisfactory
service, if you handle it carefully. The following are precautions
that should be observed:
• Do not clean the unit with abrasive or corrosive materials. This
may scratch the plastic parts and corrode the electronic circuit.
• Clean the product thoroughly after each bath. Rinse with warm
water and dry with a soft, dry cloth. Never store the product
when it is wet.
• Do not subject the unit to excessive force, shock, dust or ex-
treme temperature or humidity. This may result in malfunction,
shorter electronic lifespan, damaged battery and distorted parts.
• Do not tamper with the unit’s internal components. This will
invalidate the warranty on the unit and may cause unnecessary
damage. The unit contains no user-serviceable parts.
• Only use fresh batteries. Do not mix new and old batteries
together as the old batteries may leak.
Precautions
6
OQ005 IM_v1 1105-PB 0216.indd 6 2/17/06 1:51:54 PM

• Due to continuing improvements, actual product may differ
slightly from the product described herein.
• The technical specifications for this product and the contents of
the instruction manual are subject to change without notice.
General Instructions
Front of the Product
1. MEMORY appears on the LCD when you are setting or
displaying a user-defined temperature.
2. button turns the unit on or off. It also disables the
alarm sound.
Precautions
7
1
2
3
4
5
OQ005 IM_v1 1105-PB 0216.indd 7 2/17/06 1:51:59 PM

3. The LCD also shows the temperature in °C or °F.
4. MEMORY button sets the user-defined temperature range.
It also disables the alarm sound.
5. Low-battery indicator
Back of the Product
1. The RESET button returns all the settings to default values.
2. Thermo sensor takes water-temperature readings.
3. °C/°F button selects the temperature unit.
4. Battery compartment holds 2 AAA batteries (included).
Front of the Product
8
12
3
4
OQ005 IM_v1 1105-PB 0216.indd 8 2/17/06 1:52:00 PM

1. Remove the screws. (When you first remove the product from
its packaging, the screws will already be loose.)
2. Once loose, pull the two sections apart, or to remove the base,
insert a blunt instrument into the groove.
3. Insert 2 AAA batteries (included), ensuring proper +/–
polarities are observed.
4. To close, line up the dot with the groove. The screw holes are
now lined up.
5. Tighten the screws. Ensure the unit is firmly closed to keep
it watertight.
Notes:
• appears when the batteries are running low.
• To save power, the unit automatically turns off after 30 minutes.
Power On/Off
To turn the unit on and off, press and hold the button for
two seconds.
Batteries
9
OQ005 IM_v1 1105-PB 0216.indd 9 2/17/06 1:52:00 PM

Temperature Ranges
To obtain a temperature reading, place the unit in the water. The
unit has three preset temperature ranges to indicate when the
bath water is cold, comfortable or hot.
Comfort
Level
Color Temperature
Range °F
Temperature
Range °C
Cold Red 32.0°F - 89.9°F 0.0°C - 31.9°C
Comfortable Green 90.0°F - 100.0°F 32.0°C - 37.0°C
Hot Red 100.1°F - 122.0°F 37.1°C - 49.9°C
Comfort-Level Backlight
When the temperature changes from one comfort level to
another, the LCD illuminates. For example, green when it falls
within the Comfortable range and red when it is above or below
the Comfortable range.
Hot/Cold Alarm Alert
The unit emits an alarm sound if the temperature is 68°F/20°C or
lower, or 104°F/40°C or higher.
Basic Functions
10
OQ005 IM_v1 1105-PB 0216.indd 10 2/17/06 1:52:00 PM

Temperature Unit
To change the display measurement unit, slide the °C/°F switch to
the desired setting.
User-defined Temperature Range
The default comfort temperature range for the baby’s bath water
is 90°F to 100°F (32°C to 37°C). To set a new water-temperature
range to the desired level:
1. Mix the water thoroughly to help ensure the temperature
is even.
2. Press and hold MEMORY for two seconds.
3. Place the unit in the water, ensuring the thermo sensor on the
base of the unit is submerged in the water. While the unit is
taking a measurement, MEMORY flashes on the display and
the unit beeps for up to 10 seconds. Three short beeps will
sound to confirm the measurement has been stored.
4. The measured temperature appears on the LCD.
Basic Functions
11
OQ005 IM_v1 1105-PB 0216.indd 11 2/17/06 1:52:00 PM

Notes:
• To display the user-defined water temperature, press MEMORY.
• The unit defines the temperature + or – 3.6°F (+ or – 2°C)
of the temperature stored. For example, if the temperature re-
corded is 80.6°F (27°C), any reading below 77°F (25°C)
appears on the LCD as Cold and any reading above 84.2°F
(29°C) appears on the LCD as Hot.
• The user-defined temperature range can only be set if the water
temperature is between 32°F and 98.6°F (0°C and 37°C). There-
fore, if the recorded temperature is 96.8°F (36°C) (the comfort
temperature range is from 93.2°F to 98.6°F (34°C to 37°C). The
unit will show “- -” if the water temperature goes above 98.6°F
(37°C).
• MEMORY always appears on the LCD if the user-defined tem-
perature range is set. To change the setting again, press and hold
MEMORY. To clear the memory, press RESET.
Basic Functions
12
OQ005 IM_v1 1105-PB 0216.indd 12 2/17/06 1:52:01 PM

Type Description
Display Temperature Range 32°F to 122°F (0°C to 50°C)
Temperature Resolution +/– 0.1°C (0.2°F)
Measurement Unit User-selectable °F/°C
Unit Dimensions (H x W x D) Approximately 3" x 3" x 1"
Unit Weight 3.88 ounces
Batteries 2 AAA (UM-4) 1.5V
Technical Specifications
13
OQ005 IM_v1 1105-PB 0216.indd 13 2/17/06 1:52:01 PM

Precautions
This unit is engineered to give you years of satisfactory service,
if you handle it carefully. Here are a few precautions:
• Do not immerse the unit in water.
• Do not cover the ventilation holes. Ensure items that are nearby,
such as newspapers, tablecloths, curtains, blankets, beddings,
etc., cannot accidentally cover the ventilation holes.
• Use a soft, slightly moistened cloth to clean the unit. Do not
use abrasive or corrosive cleaning agents, as these may cause
damage.
• Do not subject the product to excessive force, shock, dust,
temperature changes, humidity and direct sunlight for
extended periods.
• Do not tamper with the internal components. This will termi-
nate the product warranty and may cause damage. The unit
contains no user-serviceable parts.
Baby Monitor with
Indoor Temperature
14
OQ005 IM_v1 1105-PB 0216.indd 14 2/17/06 1:52:01 PM

• Remove the batteries before storing the product for a long time.
Do not mix new and old batteries.
Note: The technical specifications for this product and the
contents of the instruction manual are subject to change
without notice.
CAUTION: To reduce the risk of electric shock, do not expose
this appliance to rain or moisture.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type. Batteries are
supplied by Rickbery, NiMH, 3.6V, 700mAh, 3 AA per pack
with wire.
Note: Please retain this instruction manual for future reference.
Precautions
15
OQ005 IM_v1 1105-PB 0216.indd 15 2/17/06 1:52:01 PM

• This product should only be operated by an adult and should
not to be used as a toy for children.
• This product is not intended and should not be used as a
replacement for responsible adult supervision; it only acts as
a support for your child-caring purpose. Any type of liability
beyond statutory warranty regulations or resulting from impro-
per use of this product and/or use not in accordance with
product warnings, precautions and instructions is excluded.
• Please ensure that this product and adapter cable are always
kept out of the reach of your child and at least 3 feet away.
• Never place the baby unit inside the baby crib or near water
(e.g. bathtub, wet basement, etc.).
• For indoor use only.
Warnings
16
OQ005 IM_v1 1105-PB 0216.indd 16 2/17/06 1:52:01 PM

Front View – “Parent” Unit
1. : Turns the unit on and off; activates backlight.
2. Sound Light Indicators: Shows the sound level received from
the “baby” unit.
3. +/– : Increases and decreases volume; changes setting value;
activates and disables alarm.
4. MODE: Displays or sets the clock / alarm / voice-activation
sensitivity level.
5. : Sets and operates the feeding timer.
6. Speaker
General Instructions
17
1
2
3
4
5
6
OQ005 IM_v1 1105-PB 0216.indd 17 2/17/06 1:52:02 PM

1. AC Adapter Jack
2. Table Stand
3. RESET Button
4. Lanyard Holes
5. °C/°F Selection
Back View – “Parent” Unit
18
1
2
3
4
5
OQ005 IM_v1 1105-PB 0216.indd 18 2/17/06 1:52:03 PM

1. Connection / Signal Icon
2. Low Battery on the “Baby” Unit
3. Battery Status on the “Parent” Unit
4. Voice Activation Sensitivity Level
5. Alarm Icon
6. Feeding Timer Icon
7. Indoor Temperature
8. Clock / Alarm / Timer
9. Volume Level
LCD – “Parent” Unit
19
1
2
3
4
5
6
7
8
9
OQ005 IM_v1 1105-PB 0216.indd 19 2/17/06 1:52:04 PM

1. Microphone
2. /: Turns the unit on and off; searches for channel.
3. : Turn the night-light on and off.
4. Night-light
5. LED Indicator: Flashes during data transmission.
Front View – “Baby” Unit
20
15
4
3
2
OQ005 IM_v1 1105-PB 0216.indd 20 2/17/06 1:52:05 PM