Sharper Image 200651 User manual

Thank you for choosing the Foot and Leg Spa
from Sharper Image. Please read this Quick Start
Guide to get a general idea of how this product
works. For additional instructions and important
safety information, be sure to read the entire
user’s manual in the package.
IMPORTANT: Fill tank with water before use. Do
not attempt to use this device without water,
as this will damage the unit. Warm water is
preferred. Do not use freezing cold water as this
may damage the unit.
1. Place the unit where you want to use and lock
the unit so it doesn’t move during use.
2. Fill the tank with warm water to your desired
level (up to 6 gallons).
3. Plug the Foot and Leg Spa into an AC outlet.
(Note: Be sure your hands are dry when
plugging in the device.)
4. Press ON/OFF to start the unit.
5. Press the “Heating/water wave” button to
start the water jet. The LCD screen will
display the current water temperature.
6. Use the +Temp and – Temp buttons to adjust
the water temperature to your liking.
7. Press the “Timer” button to set a timer. It will
increase by 10 minutes cycling from 10 to 60
minutes. The display screen will show
the setting time.
8. Press “Air bubble/O3/OFF” button once to
start the air bubbles. The “Air
bubble/O3/OFF” indicator light will show
yellow as it starts. Press the button a second
time, the “Air bubble/O3/OFF” light will show
red and O3 starts working. Press this button a
third time to shut off the feature.
9. To drain the water, switch the lever to on and
open the drainage valves to allow water
to flow directly into a sewer drain.
• Before draining out water from the water
container or cleaning the appliance, you must
turn off the device and unplug the power
cord from the electric outlet.
• Always drain out water along the drain valve;
do not pour water over the control panel.
• Clean the device only with a soft cloth and mild
cleansing agent. (Never use strong abrasives,
detergents or cleaning agents.)
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
-1-
Item No. 200651
FOOT AND LEG SPA
Quick Start Guide

• DO NOT immerse the appliance in water
or under shower.
• Gently wrap the power cord around the
cord wrap storage on the bottom of device.
• Do NOT use this device continuously for more than 30 minutes at a time.
• Never leave this product unattended while the power is connected.
• Keep the product clean and away from the wet environment or fireplace or heater.
• Use this device while seated. Do not attempt to stand in the Foot and Leg Spa.
• Keep this device out of the reach of children at all times.
• Turn off the power and unplug this device when not in use.
• Do not use this device if you have open wounds or sores on your feet or legs.
• Consult your doctor prior to use if you have heart disease, if you have a pacemaker or if
you are pregnant.
Rates voltage: 110V~
Rated frequency: 60Hz
Rated power: 900W
Net wt.: 14.5 lbs.
Max. temperature: 50°C (122°F)
Water volume: 23 liters (6 gallons)
Electrical cord: 1m (3’)
Dimensions: 18” L x 18” W x 19” H. 14.5lbs.
If you have any questions not covered in this guide, you may call our Customer Service
department at 1 [phone]. Customer Service agents are available
Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
CLEANING AND MAINTENANCE [CONT.]
SAFETY WARNINGS
WARRANTY / CUSTOMER SERVICE
SPECIFICATIONS
-2-