Shelti Slapshot Dome Hockey DM-Y-AB-1 User manual

Assembly Instructions
Tools Required:
14mm Wrench or Socket (Included)
12mm Wrench or Socket (Included)
4mm Hex Wrench (Included)
Phillips Head Screw Driver
Level
Step #1 - Remove Parts from Box
Remove the pedestal from its box. Locate and remove the leg levelers and bolt package.
Thank you for purchasing a Shelti product. All of us at Shelti want you to be completely satised with your
Slapshot Dome Hockey game, so feel free to contact us for help with the assembly of your product, Shelti parts,
or other information you may require.
Contents Part Number Quantity
Dome Hockey Cabinet DM-DPA-0 1
Split Pedestal DM-PDA-1 1
Accessory Package DM-ASA-0 1
Assembly Instructions 210-0130-1 1
Accessory Package Contents Part Number Quantity
Leg Levelers 201-0074-0 4
Cabinet Bolt - Hex Head M8x55mm (1 extra) 301-0043-0 11
Cabinet Washer - M8 (1 extra) 303-0025-0 11
Hex Wrench - 4 mm 205-0057-0 1
Electronic Scoring Unit 210-0180-0 1
Power Supply Adaptor 6v 210-0183-0 1
Pan Head Screw - Phillips Head M5x12mm 301-0044-0 2
9/16 Washer - M6 303-0026-0 4
Nut - M5 302-0016-0 2
Dome Hockey Puck (1" dia.) 201-0018-0 3
Pedestal Bolt 301-0058-0 8
Pedestal Washer 303-0030-0 16
Pedestal Nut 302-0022-0 8

Step #2 - Assemble the Pedestal
Bolt both pedestal
halves together
with a bolt, two
washers and a nut
for each of the
eight holes as
shown.
Step #3 - Attach the Leg Levelers
Attach all four leg
levelers into the
bottom of the assem-
bled pedestal. Screw
them in clockwise all
the way, but do not
tighten them.
Step #4 - Attach Playeld Cabinet
Carefully place the top
half of the game on to
the pedestal. Note that
the end with the
handles lines up with
the side of the pedestal
with (2) bolt holes. Using
(10) hex head bolts and
washers, secure both
halves together.
Step #5 - Level the Playeld
Lift the dome to access the inside by pulling up on the
handle attached to the dome. Do not allow the dome to
swing all the way open without supporting it. Place a
level across, lenthwise, and diagonally into the four
corners. Raise and lover the appropriate leg leveler.
Step #6 - Attach the Electronic Scoring Unit
Bolt the scoring unit to the
black brackets on the side of
the dome using the (2) nuts, (4)
washers, & (2) bolts provided.
Slip the bolt through the hole
on the scoring unit and then
through the black bracket as
shown. Tighten with a phillips
head screwdriver and cresent
wrench.
Step #7 - Attach the Electronic Scoring Unit
Locate the two wires
coming out of the hole
located on the hinge
side of the dome. Plug
them into the scoring
unit as shown. The
scoring unit can be
powered either by
using the AC adapter
provided and plugging
it into a standard 110 outlet or use (4) AA bateries (not
included).
Step #8 - Operating the Scoring Unit
Turn the power switch to“on”. Select desired game option. By
default, it begins with the 15 minute game option. To change
the game option, push the “select” button. There are seven
total options including “Free Play” which has no time limit or
scorning limit. After choosing a game option, push the “Start”
button to begin. The volume switch has three settings: High,
Low and O.
333 Morton Street - Bay City MI 48706
Phone: [phone] Fax: [phone]
Email: [email protected]
www.shelti.com Specications subject to change without noticeCopyright 2004, Shelti, Bay City - Michigan