Shenzhen Geshem Technology Co.,Ltd TPC-GS1051HT-V4 User manual

Rugged tablet
User Manual
Product name：Hand-held tablet pc
Item No.：TPC-GS1051HT -V4
Version: Ver. A00

Disclaimer
This manual is authorized and belongs to Shenzhen Geshem, without
permission, any unauthorized copying is forbidden. The content of this
manual can’t represent the commitment of Shenzhen Geshem, as the
company continues to improve the products; the company has the
right to modify this manual without further notice.
We have no responsibility for any direct/indirect/intentional or
unintentional damages and potential problems caused by unsuitable
installation and usage
Guarantee Clause:
The product has 12 months’ warranty. If the user has special
requirement, please do it as the contract signed by the two parties.
Trademarks:
All the trademarks mentioned in this manual are registered trademarks
of their respective companies.
AMI® is the registered trademark of AMI Company.
Intel®, Celeron®, Pentium® are the registered trademarks of Intel.
NetWare® is the registered trademark of Novell Inc.
PS/2 and OS/2 are the registered trademarks of International
Business Machines
Windows 7, windows XP, Windows 8 are the registered trademarks of
Microsoft

Safety Instructions
1. Please read the user manual carefully before using the product, and carefully
keep it for future reference.
2. Before connecting power supply to the product, please confirm the voltage is
compliant with the requirement of the device.
3. To avoid electric shock or damage to the product, please unplug the power
cord from the socket before cleaning the device by wet rag.
4. Please do not use liquid or aerosol cleaner to clean up the device.
5. To avoid short circuit or fire, please do not let any liquid get into or splash into
the product.
6. For a device which needs to use power cord, there must be an easy-to-reach
power socket around the device.
7. Please do not use the product in a damp environment.
8. Before installation, please make sure the device is placed on a solid surface;
accidental drop or tipping may cause malfunction or damage to the device.
9. Before you connect or unplug any signal cable, make sure all power cords
are unplugged in advance.
10. To avoid unnecessary damage caused by frequent power-on/off, wait at least
30 seconds after turning off the computer before re-turning on the computer.
11. If the product will not be used for a long time, please disconnect the power
cord, to avoid damage to the product by transient voltage.
12. If the product needs to be upgraded, installed or dismantled, please
implement all the operation on an ESD workstation, for some precision
devices are sensitive to ESD;
13. Ensure excellent heat dissipation and ventilation of the system.
14. Please do not open or dismantle the device by yourself. For the sake of

safety, this device can only be opened by a professional maintenance
person.
Packing list
 Packing list 1PC
 TPC-GS1051HT V4 rugged tablet 1PC
 Power adapter 1PC
 Power cable 1PC
 QC pass check 1PC
 User instruction(Technical instruction & user manual) 1 set
 Driver 1 set
 Accessories box 1PC
2）OS list
 WINDOWS 7 64 bit
 CPU-Z（CPU test）
 BurnInTest( general test for OS)

Contents
1. Product introduction .................................................................................. 6
1.1 Introduction ......................................................................... 7
1.2 product specifications ......................................................... 7
1.3 I/O interface ...................................................................... 10
2． Application planning ............................................................................... 10
2.1 Transportation................................................................... 10
2.2 Storage ............................................................................. 10
2.3 Unpack & check delivered equipment .............................. 11
3．Installation instruction .............................................................................. 12
3.1 Product photo ................................................................... 12
3.2 Product dismounting......................................................... 13
3.3Product outline & size........................................................ 14
4．Interface definition ................................................................................... 15
4.1 USB interface ................................................................... 15
4.2 Ethernet interface ............................................................. 16
4.3 Standard DB9 Comports .................................................. 17
4.5 Standard HDMI A Type ports ............................................ 17
4.6 Power interface ................................................................ 18
5. Appendix .................................................................................................... 19
5.1 BIOS setting ..................................................................... 19
5.1.1 Main menu selection .............................................. 19
5.1.2 Advancedmenu selection ....................................... 19
5.1.3 Settingmenu selection ............................................ 21
5.1.4 Bootmenu selection ............................................... 23
5.1.5 Securitymenu selection .......................................... 24
5.1.6 Save & Exitmenu selection .................................... 25
5.2 Driver Installation .............................................................. 26
5.2.1 Chipset driver install ............................................... 26
5.2.2 Onboard graphics driver installation ...................... 26

5.2.3 Onboard sound card driver installation .................. 26
5.2.4 Onboard NIC driver installation .............................. 26
5.2.4 FCCWarning .........................................................26
5.3 Trouble shooting ............................................................... 29

1. Product Introduction
1.1 Brief intoduction
TPC-GS1051HT V4 is rugged handheld tablet PC with low power
consumption ,high performance and reliability, fanless design with touch screen.
Front panel is made of ABS and casing is make of aluminium-alloy.
This tablet is based on Intel bay trail N2930 quad core CPU with low poer
but high performance, 4GB DDRIII on board, has USB port and TF card slot with
silicon waterproof cover, and other I/O also used waterproof connection/ports.
Whole tablet with IP65 protection level. Support Windos 7, Windows 8, Linux etc
OS.
This product can be used in military, outdoor, in-vehicle etc harsh
environment.
1.2 Specification
Item
Definition
Mai
n
fun
ctio
n
Processor
N2930 1.83GHZ quad core
Chipset
Intel® bay trailN2930 chipset
RAM
On baord DDR3 4GB
Display
Integrated graphics
Storage
Standard SSD 64GB。
Ethernet
1* RTL8111E 1000M Ethernet
Audio
1* Audio-out
Expansion
1* MPCIE, support expanding
LED
 Display:10.1″TFT LED
 Resolution: 1280 x800
 Brightness:350cd/m2
 Contrast: 800：1
Touch
screen
 Connection: USB
 Type: 10-points capacitive touch screen

Buttons
 6 buttons(2 for brightness, 2 for audio adjustment, 1
windows8 home. 1* power）

Camera
 Front Camera: 200W
 Back Camer: 500W with flash, flash is set by
Camera software
Battery
 Polymer lithium battery 5300mAH working about 8h
standby time 48h
Stylus
 Installed on casing.
Power
 Connection: 2 Pin standard DC plug
 Operating Voltage 12V DC 、 AC220v convert to
12V/5A power adapter
 直流车充(带普通头DC插头)
IO ports
 1*USB2.0 1*USB3.0
 2*RS232(1*RS232 1*RS485 optional)
 1*SD card slot
 1* SIM card slot
 1* HDMI Port
 1* Ethernet port RJ45
 1* Audio out
 3G/4G,GPS, RFID、1D/2D scanner optional
Perf
orm
anc
e
Size
 TPC-GS1051HT
274mm（L）×194mm（W）×26.5mm（H）；
Structure
 Casing: High-strength aluminium alloy,Anodized
polishing surface, meet IP65 protection level.
 Color: Silver
 Thermal design: integrated all-aluminum body
active thermal design
 Material: High-strength alloy dissipation board.
Weight
 TPC-GS1051HT V4：N.W：1.45Kg；G.W：1.7Kg
Temp.
 Operating temp:-20°C ～ 60°C
 Storage Temp: -50°C ～ 70°C

HUMIDITY
90% @ 40°C（non-condensing）
EMC
 GB9254 Class A
 GB/T 17618
RELIABILIT
Y
 MTBF ≥ 50000h
 MTTR ≤ 0.5h
SAFETY
Compliance with with standard of GB4943
Protection
IP65 optional
Mechanic
al
Properties
 Anti-vibration: 5-19Hz/1.0mm amplitude;
19-200Hz/1.0g, acceleration
 Anti-shock: 10g acceleration, 11ms duration；
POWER
 100 ～240V AC/50 ～60Hz(standard, with power
adapter); Input power: 12V DC
 Power Dissipation: 11W(standby);
 Power: 17W (MaxPower 100％);
Hardware
version
 DH-N2930 V2.0

1.3 I/O Interface
Photo 1-1
2．Application planning
2.1 Transportation
Well-packaged products are suited for transportation by truck, ship,
and plane. During transportation, products should not be put in open
cabin or carriage. During transshipping, products should not be
stored in open air without protection from the atmospheric
conditions. Products should not be transported together with
inflammable, explosive and corrosive substances and are not
allowed to be exposed to rain, snow and liquid substances and
mechanical force.
2.2 Storage
Products should be stored in package box when it is not used.
And warehouse temperature should be
-20OC~70 OC, and relative humidity should be 20% ~ 85%. In the

warehouse, there should be no harmful gas, inflammable, explosive
products, and corrosive chemical products, and strong mechanical
vibration, shock and strong magnetic field interference. The package
box should be at least 10cm above ground, and 50cm away from wall,
thermal source, window and air inlet.
Caution ！！
Risk of destroying the device!
When shipping the PC in cold weather, please pay attention to the
extreme temperature variation. Under this circumstance, please
make sure no water drop (condensation) is formed on the
surface or interior of the device. If condensation is formed on the
device, please wait for over twelve hours before connecting the
device.
2.3 Unpack and check the delivered equipment
Unpack the equipment
Pay attention to the following things when you unpack the
equipment.
 Please take the advice not to throw away the original
packaging material and please retain to use it when the
equipment should be transported again.
 Please put the document in a safe place. It will be used in the
initial adjustment of equipment and it is a part of the
equipment.
 When you check the delivered equipment, please check
whether it is obviously damaged during the transportation.
 Please check whether the delivered parcel includes the
whole equipment and the accessories you ordered separately.
If there is any discrepancy or damaged during transportation,
please contact our customer-service staff.

3．Installation Instruction
3.1 Product Photo
Photo 3-1

3.2 Installation Instruction
Photo 3-2

3.3 Product photo & assembly photo
Photo 3-3

4．Product Interface
4.1 USB Definition
This tablet has 1 USB3.0 and 3 USB2.0 connection, definition as below:
USB1-3
USB2.0
Definition
1
＋5V
2
USB Data－
3
USB Data＋
4
GND
USB4
USB3.0
Definition
1
VBUS
2
D－
3
D＋
4
GND
5
StdA_SSRX－
6
StdA_SSRX＋
7
GND_DRAIN
8
StdA_SSTX－
9
StdA_SSTX＋

4.2 Ethernet
This tablet has 1 Ethernet port, definition as below:
LAN1，LAN2
ACTLED
(Single color
Yellow)
Network status
LILED
（2colors
Green/Orange）
Network
Speed
Orange
1000Mbps
Flash
Data
Transmission
Green
100Mbps
Light off
No Data
Transmission
Light off
10Mbps

4.3Standard DB9 Comports
Total 2 COM on this product. COM1、COM2 support RS-232, COM4 Support
RS485/RS422,Definition as below:
COM1～4
P
i
n
Definition
RS-23
2
RS-485
RS-422
1
DCD#
T/R＋
T/R＋
2
RXD
T/R－
T/R－
3
TXD
X
RXD＋
4
DTR#
X
RXD－
5
GND
GND
GND
6
DSR#
VCC（＋5V backup
input）
VCC（＋5V backup
input）
7
RTS#
X
X
8
CTS#
X
X
9
RI#
X
X
4.5 Standard HDMI A Type
HDMI
Pin
Definition
Pin
Definition
1
DATA2＋
2
DATA2 blocked
3
DATA2－
4
DATA1＋
5
DATA1 blocked
6
DATA1－
7
DATA0＋
8
DATA0 blocked
9
DATA0－
10
DATA1_CK＋
11
DATA1_CK
blocked
12
DATA1_CK－
13
CEC
14
Reserved
15
SCL（DDC
16
SDA（DDC

Clock）
data）
17
DCC/CEC GND
18
＋5V
19
Hot plug
checking
/
4.6 Power Port
This product works with DC+12V power supply, and work with power adapter.
Definition as below:
DC12V input
Pin
Definition
1
＋12V
2
GND

5. Appendix
5.1 BIOS Setting
5.1.1 Main Menu selection
Press “Del” after startup and enter BIOS CMOS program. The first
page as below and user can set date and time as picture 5-1
Photo 5-1
5.1.2 Advanced Menu selection

Photo 5-2.1
 ACPI Settings Advanced power management setting；
 CPU Configuration CPU settomg；
 PPM Configuration This selection can modify PPM parameters
 Thermal Configuration Thermal setting;
 IDE Configuration IDE setting；
 Select OS:
Photo 5-2.2
Photo 5-2.3