SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT S1U-DC06-ANT2 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S1U-DC06-ANT2/S1U-DC09-ANT2/ S1U-DC12-ANT2/ S1U-DC24-ANT2(1 Channel/Three ControlModes)
1xTransmitter: CB-2L
1xUser manual
Feature:
Wireless control,easy toinstall
ControlLights,Motors,Fans, electricallyoperated Doors /Locks/Windows/Blinds/Carsor OtherApplianceswithvoltage AC110~240Vor
DC0~28V.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
More reliablethan fixed code;the transmitter useEV1527 Learning code,whichisup to1million codes,reducing code collision and unauthorized
code scanning possibilities.
One / severaltransmitterscan controlone /severalreceiverssimultaneously.
Twoor more transmitter&receiverssetcanbe used inthe sameplace.
Transmitting Frequency: 315MHz /433MHz
Working distanceoftransmitter andreceiver withexternalextend antenna: 2000M/ 6000ft (theoretically)
Receiver:
ModelNo.: S1U-DC06-ANT2/S1U-DC12-ANT2/ S1U-DC09-ANT2/ S1U-DC24-ANT2
Channel: 1CH
ControlModes: Toggle, Momentary, Latched
Coding Type: Fixed code or learning code
Coding Setting:Bylearning
Power Supply(Operating Voltage):DC6V(S1U-DC06-ANT2),DC12V 1V(S1U-DC12-ANT2),DC9V 1V(S1U-DC09-ANT2),DC24V 1V
(S1U-DC24-ANT2)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBsize:67mm x50mm x18mm
Casesize: 75mm x54mm x27mm
StaticCurrent: ≤6mA
MaximumWorkingCurrent: 10A
ExternalExtendAntenna:
FrequencyRange: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
CableLength: 150cm
Weight:35g
Anti-interference,waterproof, shielded wire set inside
Magneticstand design for easytoinstall
Transmitter:
ModelNo.: CB-2L
Channel: 2CH
RemoteControlDistance: 1000m/3000ft (theoretically)
Encode:EV1527 Learning code (upto1million codes, reducing code collisionand unauthorized code scanningpossibilities.)
Unitsize: 135mm x42mm x25mm
Power Supply: 1x6F22-9V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following operation):
Setting controlmode Toggle:ConnectJumper-2.
Controlmode Toggle:Press ->On; Press again->Off.
Press bigbutton:Turn onthe relay(connectB and C, disconnectA and B)
Press bigbuttonagain: Turnofftherelay(disconnectBand C, connect Aand B)
Setting controlmode Momentary:Connect Jumper-1.
Controlmode Momentary: Pressand hold->On; Release->Off.
Press and holdbigbutton:Turn onthe relay(connectB and C, disconnect Aand B)
Releasebigbutton:Turn off the relay(disconnectBand C,connect Aand B)

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
Setting controlmode Latched:Disconnect Jumper-1 and Jumper-2.
Controlmode Latched:Press ->On, other relays Off;Press another button ->Off.
Press bigbutton:Turn onthe relay(connectB and C, disconnectA and B)
Presssmallbutton: Turnoffthe relay(disconnectBand C,connect Aand B)
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalremotecontrols withdifferent codes.
InteriorAnalogue Circuit Application: ForDC12Vmotororlamp
DC0~28V/ AC110~240V
Application Circuit
Powersupply
A, B=NormallyClosed;B,C=NormallyOpen.
Lamp
Relay
_
+
A B C
M
_
+
Powersupply
Motor
+
Relay
_
+
A B C
Button
Jumper-2
Jumper-1
Button
Jumper-2
Jumper-1
SignalLED
PowerLED
Antenna
RFmodule
Antenna
RFmodule
PowerLED
SignalLED
IC
IC