Shimano SW-EN600-L User manual

(English) UM-0NM0A-000
User's Manual
Switch Unit
https://si.shimano.com

Contents
IMPORTANT NOTICE........................................................................................ 3
Important safety information........................................................................ 4
Notice............................................................................................................... 5
FCC ................................................................................................................... 6
Regular inspections before riding the bicycle .............................................. 7
Names of parts................................................................................................ 8
LED display ...................................................................................................... 9
LED1 ......................................................................................................................9
LED2 ......................................................................................................................9
Wireless functions......................................................................................... 10
Function..............................................................................................................10
Connection method ...........................................................................................10
E-TUBE application.............................................................................................10
Wireless system specifications..................................................................... 11
2.4 GHz digital wireless systems........................................................................11
When a problem occurs................................................................................ 12
Error indication ..................................................................................................12
Troubleshooting .................................................................................................12
2

IMPORTANT NOTICE
For safety, be sure to read this user's manual thoroughly before use, follow it for correct use, and store it so that
it can be referenced at any time.
The following instructions must be observed at all times in order to prevent personal injury and physical damage
to equipment and surroundings. The instructions are classified according to the degree of danger or damage
which may occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result in death or serious injury.
WARNING Failure to follow the instructions could result in death or serious injury.
CAUTION Failure to follow the instructions could cause personal injury or physical damage to
equipment and surroundings.
Contact the place of purchase or a distributor for information on installation, adjustment, and replacement of
the products which are not found in the user's manual. A dealer's manual for professional and experienced
bicycle mechanics is available on our website ( https://si.shimano.com ).
IMPORTANT NOTICE
3

Important safety information
Do not disassemble or modify the product. This may cause the product to not operate correctly, and
you may suddenly fall and be seriously injured.
Do not pay excessive attention to the display while riding. Doing so may result in an accident.
Ensure that head and tail lights can turn on before riding the bicycle.
Observe the instructions in the manual for the bicycle in order to ride safely.
Never modify the system. Doing so may cause a system error.
Use the product under the supervision of someone responsible for safety, and only as instructed. Do not
allow anyone (including children) with reduced physical, sensual, or mental capacity, or those without
experience or knowledge, to use the product.
Do not allow children to play near the product.
Important safety information
4

Notice
Do not keep connecting and disconnecting the small waterproof connector. Doing so may impair the
waterproofing.
The components are designed to be fully waterproofed to withstand wet weather riding conditions; however,
do not deliberately place them into water.
Do not clean the bicycle in a high-pressure wash. If water gets into any of the components, operating
problems or rusting may result.
Handle the components carefully, and avoid subjecting them to strong shock.
Be sure to attach dummy plugs to any unused E-TUBE ports.
Do not allow water to get into the E-TUBE ports.
Do not use thinner or other solvents to clean the products. Such solvents may damage the surface.
Do not turn the bicycle upside down. There is a risk of damage to the switch unit.
Products are not guaranteed against natural wear and deterioration from normal use and aging.
For connectable SHIMANO STEPS components and shifting units, check the compatibility information on the
SHIMANO product website ( https://productinfo.shimano.com/#/com ).
SHIMANO STEPS user's manuals are split among several booklets. Please view the “SHIMANO STEPS User's
Manual”, “SHIMANO STEPS Special Battery and Parts User's Manual”, and “SHIMANO STEPS Cycle Computer
User's Manual” as well, according to the components you are using.
The open source software used in this product is available at the following URL:
https://si.shimano.com/compliance/oss
For maximum performance we highly recommend SHIMANO lubricants and maintenance products.
Notice
5

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC
6

Regular inspections before riding
the bicycle
Before riding the bicycle, check the following items. If any problems are found, consult your place of purchase or
a distributor.
Does the drivetrain perform gear shifting smoothly?
Is there any looseness or damage in the component parts?
Are the components securely installed to the frame/handlebar/stem, etc.?
Do any abnormal noises occur while riding?
Is there sufficient charge remaining in the battery?
Regular inspections before riding the bicycle
7

Names of parts
Power button
E-TUBE port
Light button
X button
Y button
Turns the main power of the bicycle
ON/OFF.
Turns the light connected to the drive unit
ON/OFF.
Increases a level of assistance each time
pressed.
Decreases a level of assistance each
time pressed.
LED1
LED2
Names of parts
8

LED display
LED1
Displays the level of the battery mounted on the bicycle.
* This battery level display uses zero to indicate a battery level where assistance can no longer be performed.
SHIMANO STEPS provides an amount of battery separate from the assist function for additional equipment such
as lights and ABS. Therefore, the battery level may differ from that which can be checked with the battery LED.
Display Battery level
Green 100 - 21%
Red 20 - 11%
Flashing red 10% or less
LED2
Mainly used to display the current assist mode. The assist mode returns to OFF when the power is turned OFF.
* Refer to the “SHIMANO STEPS User's Manual” for details on the assist mode and walk assist mode operations.
Display State
OFF The assist mode is OFF.
Light blue The assist mode with the lowest level of assistance.
(Push the Y button to turn LED2 OFF and disable the assist mode.)
Green The assist mode with an intermediate level of assistance.
Yellow The assist mode with the highest level of assistance.
(Pressing the X button does not make the level of assistance any higher than this.)
Flashing yellow Indicates the adjustment mode.
In this state, gear shifting operations cannot be performed with the switch unit (right).
Blue The assist mode is set to the walk assist mode.
Flashing blue Assistance is functioning in the walk assist mode.
Flashing red Refer to “Error indication.”
LED display
LED1
9

Wireless functions
Function
Update the E-TUBE PROJECT software to check the latest functions. Please contact your place of purchase for
details.
This product supports Bluetooth ®and ANT, and can send information on the assist mode and gear position for
electronic gear shifting to external devices.
Connection method
ANT connection Turn the power ON to receive communication. Switch the external device to
connection mode then connect it.
Bluetooth ®LE connection Be sure to switch the external device to connection mode ahead of time. This product
receives communication in the following cases:
E-TUBE application
For 15 seconds after the power is turned ON
For 15 seconds after one of the buttons except for the power button is operated
E-TUBE PROJECT Cyclist may be used if a Bluetooth ®LE connection is established with a smartphone. E-TUBE
RIDE can be used to check traveling data on a smartphone connected over Bluetooth ®.
E-TUBE PROJECT is needed to change the setting of the SHIMANO STEPS and to update firmware. For
information on how to install E-TUBE PROJECT, check the support website ( https://bike.shimano.com/e-tube/
project.html ).
Wireless functions
Function
10

Wireless system specifications
2.4 GHz digital wireless systems
The digital wireless technology of this product uses the same 2.4 GHz frequency as wireless LAN.
In rare cases, measurement may not be able to be performed accurately due to strong electromagnetism,
electromagnetic waves, or interference emanated from objects or locations.
Model name SW-EN600-L
Frequency band 2,402 - 2,480 MHz
Maximum high-frequency output +4 dBm
Firmware version 4.0.0 or later
TVs, PCs, radios, motors/engines, or inside vehicles or trains
Near railroad crossings and tracks, television stations, and radar stations
Other wireless computers or digital control lights
Wireless system specifications
2.4 GHz digital wireless systems
11

When a problem occurs
Error indication
When an error occurs, LED2 flashes red quickly.
Follow one of the procedures below to reset the indication:
If the error persists, contact your place of purchase or a distributor for assistance.
When using a cycle computer, refer to the “SHIMANO STEPS Cycle Computer User's Manual” for information on
the display. For details on error/warning codes, check the latest versions below:
https://si.shimano.com/error
Troubleshooting
The FAQ for SHIMANO STEPS can be accessed with the following:
https://bike.shimano.com/faq/STP0A
This symbol on your product, literature, or packaging reminds you that this product must be taken to separate
collection at the end of its working life. Do not dispose of this product as unsorted municipal waste but
instead take it for recycling. By ensuring the product is disposed correctly, you will help to prevent potential
negative consequences for the environment and human health. For info on your nearest recycling point, check
with your local waste authority.
Turn the power OFF, then ON again.
Remove the battery from the battery holder and install it again.
When a problem occurs
Error indication
12

One Holland, Irvine, California 92618, U.S.A. Phone: [phone]
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: [phone]
Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Aug. 2022 by SHIMANO INC. ITP