SHOTO SDA-10 Instruction sheet

1.Safety & Warning
2.Product Introduction
1. Applications & Advantages
2. Product Features
3. Dimension & Capacity
4. Front Panel Appearance
5. Front Panel Layout & Details
6. LED Indicator Description
7. Instruction for ADD DIP Switch
3.Transportation & Storage Instruction
1. Transportation Instruction
2. Storage Instruction
4. Installation & Commissioning
1. Unboxing
1. Unboxing the Wooden Box
2. Unboxing the Paper Carton
3. Unboxing Battery Module
4. Check Battery PACK Status
2. MOP for New Battery Installation
1. Install Battery PACK in Rack/Cabinet Slot
1. Battery PACK Insert Tips
2. Prepare for Battery PACK Cable Connection
3. Install Battery Pack Grounding Cable
4. Dry Output Alarm Cable Connection
5. Data Communication Cable connection & DIP Switch Check
6. Battery Temperature Sensor Installation

7. Battery Power Cable Connection Layout (1~3PACK)
1. Battery Power Cable Connection Layout (4++ PACK)
8. PACK Terminal to Cabinet Busbar Power Cable Connection
1. PACK Parallel Connection Procedure
2. PACK Parallel Connection Inspection
9. Cabinet Busbar to PSU Power Cable Connection
3. Battery Commissioning
1. Setup Battery Settings Parameters on PSU
2. Check Alarm & Event Log Parameters on PSU
3. Battery Power-ON
5.Installation Checklist
6.Battery Charge/Discharge
1. Charging Instruction
2. Discharging Instruction