1:LCD Backlight time
There are 4 kinds of time setting: 10s, 20s, 30s, 60s:
2:Restore Factory Setting
This function is for fixture factory restoration. All the data will be initialized after operation:
g、Info mode
This mode is information mode:
1、Temperature fault detection
Temperature control is normal
Temperature control is abnormal
2、Version Example
NOTE
1. Press the “MODE” and “SETUP” at same time for a few seconds to restore factory settings,
the data will be initialized.
2. Be care with your operations. You endanger your own safety and others, please follow the
operation in this manual
3. When the fixture operated in a environment temperature which is beyond the scope of
parameter allows, if the temperature is higher than allows, please reduce full power use time,
to prevent overheating damage fixture.
4. When the fixture power on, if the display shows , please check the cables inside the
fixture.
5. Please do not operate when power on to avoid safety accident.