Show Tec EVENTLITE 6/3 User manual

EventLite 6/3
ORDERCODE 44000
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: [phone]

Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec EventLite 6/3 brings excitement to any venue. Whether you want simple plug-&-play
action or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!

1
Showtec
Showtec EventLite 6/3™Product Guide
Warning ..........................................................................................................................................................................2
Safety Instructions....................................................................................................................................................2
Operating Determinations.....................................................................................................................................4
Return Procedure ....................................................................................................................................................4
Claims ........................................................................................................................................................................4
Description of the device ...........................................................................................................................................5
Overview ...................................................................................................................................................................5
Installation .....................................................................................................................................................................6
Set Up and Operation..................................................................................................................................................6
Sweden 2.4G Wireless communication module ...............................................................................................7
Wireless DMX connection ......................................................................................................................................7
Disconnect from the Wireless DMX signal transmitter.......................................................................................9
Connect the EventLite to the Wireless DMX signal transmitter .......................................................................9
Charging the built-in battery.................................................................................................................................9
Fixture Linking..........................................................................................................................................................10
Data Cabling..........................................................................................................................................................10
Control Modes .......................................................................................................................................................11
One EventLite (Built-in Programs + Auto Run + Static colors) ...................................................................11
One Dynamic LED (Sound-control) ...............................................................................................................11
Multiple EventLite’s (Master/Slave control)..................................................................................................11
Multiple EventLite’s (DMX Control+Wireless DMX control) ........................................................................12
Control Panel..........................................................................................................................................................13
DMX Control Mode ...............................................................................................................................................13
DMX Addressing.....................................................................................................................................................13
Menu overview ......................................................................................................................................................14
Main Menu Options ..........................................................................................................................................15
1. DMX 512 Address ..........................................................................................................................................15
2. Slave Mode ....................................................................................................................................................15
3. Creating a static color.................................................................................................................................16
4. Built-in Programs ............................................................................................................................................16
5. Auto Run Programs.......................................................................................................................................16
6. Sound control Mode ....................................................................................................................................16
DMX Channels........................................................................................................................................................17
2 Channels..........................................................................................................................................................17
3 Channels..........................................................................................................................................................17
5 Channels..........................................................................................................................................................17
Maintenance...............................................................................................................................................................18
Troubleshooting ..........................................................................................................................................................18
No Light....................................................................................................................................................................18
Temperature Control Protection ........................................................................................................................18
No Response to DMX ............................................................................................................................................18
Product Specification ................................................................................................................................................20

2
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to
ensure that all parts are present, and have been received in good condition. Notify the dealer
immediately and retain packing material for inspection if any parts appear damaged from shipping or
the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event
that a fixture must be returned to the factory, it is important that the fixture be returned in the original
factory box and packing.
Your shipment includes:
• EventLite 6/3 with IEC cable 1,5m
• User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the
acceleration of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in
ideal or singular optimum conditions. For this reason when all color LEDs are used at their fullest
intensity, life of the LEDs is significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000
hours will be achieved under normal operational conditions. If improving on this lifespan expectancy is
of a higher priority, place care in providing for lower operational temperatures. This may include
climatic-environmental and the reduction of overall projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the
non-observance of this manual or any unauthorized modification to the device.
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!

3
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never look directly into the light source.
Never leave any cables lying around.
Never use the device during thunderstorms, unplug the device immediately.
Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach, as they are potential sources of danger.
Do not insert objects into air vents.
Do not open the device and do not modify the device.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not shake the device. Avoid brute force when installing or operating the device. The
EventLite reacts very sensitive to movement.
Only operate the device after having familiarized with its functions.
Only use device indoor, avoid contact with water or other liquids.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the
power-cord from time to time.
Only install the device on a flat surface.
If the external cable is damaged, it has to be replaced by a qualified technician.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired,
due to cracks or deep scratches.
If device is dropped or struck, switch off the device. Have a qualified engineer inspect for
safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation),
do not switch it on immediately. The arising condensation water might damage your device.
Leave the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Showtec dealer for
service.
For adult use only. The device must be installed out of the reach of children. Never leave the
unit running unattended.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the EventLite. The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this
device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !

4
Operating Determinations
•This device is not designed for permanent operation. Consistent operation breaks will ensure that
the device will serve you for a long time without defects.
•The minimum distance between light-output and the illuminated surface must be more than 0.5
meter.
•The maximum ambient temperature ta= 45°C must never be exceeded.
•The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
•If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products
returned
without an RMA number will be refused. Highlite will not accept the returned goods or any
responsibility. Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to
shipping the fixture. Be prepared to provide the model number, serial number and a brief description
of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from
inadequate packaging is the customer’s responsibility. Highlite reserves the right to use its own
discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is
always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at
their disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage
must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture
is damaged due to shipping. Transportation damage has to be reported to us within one day after
receipt of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied
with a letter defining the reason for return shipment. Non-prepaid return shipments will be refused,
unless otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the
agreement, regardless of the agreement of which the obligation is resulting.

5
Description of the device
Features
The EventLite 6/3 is a LED effect from Showtec
Input Voltage (battery charger): AC 100V-240V, 60Hz/50Hz (only power in, no power out)
Compact and lightweight
Battery: 11.1V, 12AH
Power consumption at full output: 30W
Operating time at Full On: 7 hours (RGB)
Charging time: 8 hours (LED blackout when the device is charging)
Operation mode: LCD display
Control feature: Built-in programs, auto running mode, DMX mode, master/slave mode, sound-
active mode, and static color
DMX channels: 2, 3, 5 Channels
DMX communication mode: 2.4GHz wireless communications (received), XLR3 wired connection
Wireless module: Sweden W-DMX TRx 2.4G WIFI, 2dBi Antenna
RGB color mixing
Ideal for all kinds of events and a true leader in his class
3 in 1 RGB LED’s (6*Tri-3W) combined with dedicated high class optics ensuring a bright and well
defined beam
Adjustable projection angle
For (temporary) outdoor use
Rain cover is separately available
IP44 (temporary event)
Dimmer: 0-100%
Fuse: 1A/250V
Housing: Stainless steel
Fixture Connection: 3-pin XLR In and Out, IEC Power in
Cooling: Convection
Dimensions: 162 x 178 x 289 mm (LxWxH)
Weight: 3,42 Kg
Note: Knowledge of DMX is required to fully utilize this unit.
Overview
Fig. 1
12 3 4 5
1) IEC Power Connector + Fuse F1A / 250V 4) DMX signal connector (IN) 3-pin
2) 6x 3-in-1 RGB LEDs 3W 5) DMX signal connector (OUT) 3-pin
3) Wireless DMX Antenna

6
Fig. 2
6 7 8910
6) Battery Charger LEDs
7) LCD Display with menu buttons
8) Wireless DMX LED
9) Wireless DMX Unlink button
10) On/Off
Installation
Remove all packing materials from the EventLite 6/3. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product
specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice
versa.

7
Sweden 2.4G Wireless communication module
Communication distance: depeninding on the transmitting power or transmitter module
Test conditions: W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power 20dBm (100mW)
Range: Indoor (approx. through three concrete walls) 60m
Outdoor: 250m
Wireless DMX connection
The wireless receiving module “Pico G4 Receiver, 2.45GHz”, provided by Swedish WIRELESS SOLUTION,
only has a 2.45 GHz wireless signal receiving function. In order to match the wireless signal, please use
the Wireless DMX Micro Transmitter/ Black Box F-1 G4 MK2 by WIRELESS SOLUTION (50231).
To indicate the status of the wireless communication, please look at the big green LED indicator light
on the right side of the display.
Wifi Problems:
1. No emitter/sender matching
The LED Indicator dims for a long period of time.
2. Matching signal with one emitter, but loss of signal communication
The LED Indicator light will light up for 100ms and then dim for 100ms; The LED will flicker quickly.
3. Communication with an emitter, but no DMX data
The LED Indicator will light up for 900ms and then dim for 100ms; The LED will flicker slowly.
When the wireless DMX communication is normal, the LED indicator will always be on.
The EventLite cannot receive a wireless DMX signal and a DMX cable signal at the same time
When the device is in static color mode, built-in program mode, auto run mode or sound-active
mode, please ensure that the matching 2.4GHz wireless signal transmitter is OFF.
The EventLite is only a WDMX receiver
and never a WDMX sender
Fig. 3
Example (Fig 3):
In static color mode, built-in program mode, auto run mode or sound-active mode, the EventLite
cannot send its signal to another Eventlite wirelessly !!
In one of these modes, the second, third, etc EventLite must always be connected via a DMX signal
cable.

8
When the EventLite is in DMX or SLAVE mode, the EventLite can receive a Wireless DMX signal (CH1-
512) and at the same time it can also sent out a DMX signal through a DMX cable.
Example (Fig 4):
The Showtec Operator Air (50726) sends out a wireless signal with 512 channels and the EventLite picks
up this signal. It uses the first 5 channels for its own setup and sends the rest of the channels through a
DMX cable to the other Compact Pars 7 (42580).
The EventLite is only a WDMX receiver
and never a WDMX sender
Fig. 4

9
Disconnect from the Wireless DMX signal transmitter
The EventLite can be temporarily disconnected from the wireless DMX signal transmitters.
1. Press and hold the Unlink-button for more than 3 seconds. The display will show the time you are
holding the button down.
2. When you release this button, the device will be temporarily disconnected from the wireless DMX
signal transmitter, the indicator light will turn off.
3. The EventLite can only rebuild its wireless communication by first disconnecting and then trying to
match the active signal condition.
Wireless DMX Unlink button
Connect the EventLite to the Wireless DMX signal transmitter
1. The EventLite cannot actively match a random wireless signal transmitter.
2. In order to create a Wireless match, please check the manual of your wireless signal transmitter.
3. We advise you to use the Wireless DMX Micro Transmitter/ Black Box F-1 G4 MK2 by WIRELESS
SOLUTION (50231).
50231
Charging the built-in battery
1. The device is equipped with a 11.1V/12AH lithium battery.
2. Turn off the power switch.
3. In order to charge the battery, you need to plug in the IEC powercable.
4. While the battery is charging, the green LEDs on the left side will light up, just like an equalizer.
5. When the battery is fully charged, the green LEDs will light up permanently.
You cannot take out the lithium battery and charge it separately.
The battery can only be charged when it is inside the device
Important!
Do not charge the lithium battery for more than 24 hours.
Please recharge the battery in time. Example: When the battery is low on power or out of power. If
you do not use the EventLite for a long time, please recharge the battery at least once a month, in
order to prevent the lithium battery from damaging.
After a cycle use of 300 times, the battery capacity will be reduced to about 8AH (70% of the total
capacity). Please reduce the charge and discharge times, to extend the battery lifetime. After 300
times of charging and discharging, you need to replace the battery.
Store in an upright position.

10
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or
to run synchronized shows on two or more fixtures set to a master/slave operating mode. The
combined number of channels required by all the fixtures on a serial data link determines the number
of fixtures the data link can support.
The EventLite uses up to 5 channels.
Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX
optically isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of EventLite on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX
cables directly from a dealer/distributor or construct your own cable. If you choose to create your
own cable please use data-grade cables that can carry a high quality signal and are less prone to
electromagnetic interference.
DAP Audio Certified DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode: FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made
by Neutrik®. Ordercode: FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

11
Control Modes
There are 5 modes: • Static Colors
•Built-in programs
• Auto Run Programs
•Sound-controlled
•Master/Slave
•DMX512
One EventLite (Built-in Programs + Auto Run + Static colors)
When the EventLite is not connected by a DMX-cable and Wireless DMX is switched off, it functions as
a stand-alone device. See page 16 for more information about the Built-in Programs + Auto Run +
Static colors.
One EventLite (Sound-control)
1. Leave at least 0,5 meter on all sides for air circulation.
2. Plug the end of the electric mains power cord into a proper electric power supply socket.
3. Turn on the music. If device is set to (Audio) and you have pressed enter, then the
fixture will react to the beat of the music. Please see page 16 for more information about the
sound-control options.
Multiple EventLite’s (Master/Slave control)
1. Leave at least 0,5 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the EventLite.
The pins: 1. Earth
2. Signal -
3. Signal +
3. Link the units as shown in (Fig. 5), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You
can use the same functions on the master device as described on page 16 (Static Colors, Auto
Run,Built-in Programs or Sound-control). This means on the master device you can set your desired
operation Mode and all slave devices will react the same as the master device.
Multiple EventLite’s (Master/Slave control)
Fig. 5

12
Multiple EventLite’s (DMX Control+Wireless DMX control)
1. Plug the end of the electric mains power cord into a proper electric power supply socket or use
the Eventlite with its built-in battery but without the powercable.
2. Use a 3-p XLR cable to connect the EventLite’s.
3. Link the units as shown in (figure 6), Connect a DMX signal cable from the first unit's DMX "out"
socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth
units.
4. Supply electric power: Plug the end of the mains power cord into proper electric power supply
sockets. Do so for all units and the controller. Do not supply power before the whole system is set
up and connected properly.
Multiple EventLite’s DMX Set Up
Fig. 6
Note: Link all cables before connecting electric power

13
Control Panel
Fig. 7
A. Battery indicator LEDs F. Up Button
B. LCD Display G. Down Button
C. WDMX indicator LED H. Wireless DMX Unlink button
D. MODE button I. ON/OFF
E. SETUP Button
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the controller. When a DMX
signal is present, the green LED (C) will blink. The fixtures respond to the DMX signal from the controller.
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is
the first channel from which the EventLite will respond to the controller. Please note when you use the
controller, the unit has up to 5 channels (in TOUR mode). I.e.: When using multiple EventLite, make sure
you set the DMX addresses right. Therefore, the DMX address of the first EventLite should be 1(001); the
DMX address of the second EventLite should be 1+5=6; the DMX address of the third EventLite should
be 6+5=11, etc. Please, be sure that you don’t have any overlapping channels in order to control
each EventLite correctly. If two or more EventLite’s are addressed similarly, they will work similarly.
Controlling: After having addressed all EventLite’s, you may now start operating these via your lighting
controller. Note: After switching on, the EventLite will automatically detect whether DMX 512 data is
received or not. If there is no data received at the DMX-input, the problem may be:
Controlling:
After having addressed all EventLite, you may now start operating these via your lighting controller.
Note: After switching on, the EventLite will automatically detect whether DMX 512 data is received or
not. The problem may be:
•The XLR cable from the controller is not connected with the input of the EventLite.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires
are swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
The EventLite will only show its version number at start-up !

14
Menu overview

15
Main Menu Options
Press the MODE button to scroll through 6 options of the menu:
1. DMX 512 Address
2. Master/Slave
3. Static Color
4. Built-in Programs
5. Auto Run
6. Sound-controlled
1. DMX 512 Address
When a DMX signal is present, the DMX LED will light up.
With this menu you can set the DMX address and the personality of the EventLite.
1) Press the MODE button, until the display shows: .
2) You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from
3) When you press the SETUP button twice, the display shows: .
4) You can set 3 DMX Modes:
2 Channels
3 Channels
5 Channels
2. Slave Mode
When the display shows: , the device is a slave device. It will now react the same as its
master.

16
3. Creating a static color
With this menu you can set the Static Colors (R,G,B) of the EventLite.
1) Press the MODE button on the EventLite, until the display shows: .
2) Use SETUP to change the static colors (Red, Green, Blue).
3) Use the UP/DOWN buttons to change the value from 000-255.
4) You can combine RED, GREEN and BLUE to create an infinite range of colors (0-255).
Red
Set the value of the red LEDs (0-255).
Green
Set the value of the green LEDs (0-255)
Blue
Set the value of the blue LEDs (0-255).
4. Built-in Programs
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Built-in Program Mode.
3) You can choose 8 built-in programs , by using the
UP/DOWN buttons.
5. Auto Run Programs
1) Press the MODE button on the device, until the display shows .
2) With this menu you can set the Auto Mode of the EventLite.
3) Press SETUP to enter the AUTO Menu. You can choose 3 different sub menus.
Speed from 01-99 and FL
Flash Frequency from 00-99
Number of Loops from 01-100
4) Use the SETUP button to scroll through the menu.
5) Use the Up / Down buttons to change the value.
6. Sound control Mode
1) Press the MODE button on the device, until the display shows . Turn on the music
and the EventLite will react to the beat of the music.
You can set the sensitivity from low-sensitivity to high-sensitivity between 00 - 31.

17
DMX Channels
2 Channels
Channel 1 –Colors, Built-in Programs, Sound
0-9
Off
10-19
Red
20-29
Red+Green
30-39
Green
40-49
Green+Blue
50-59
Blue
60-69
Red+Blue
70-79
Red+Green+Blue
80-89
Program 1
90-99
Program 2
100-109
Program 3
110-119
Program 4
120-129
Program 5
130-139
Program 6
140-149
Program 7
150-159
Program 8
160-255
Sound control
Channel 2 –Speed (when CH1 is set between 80-159 )
0-255
Speed from slow to fast
Channel 2 –Sensitivity (when CH1 is set between 160-255 )
0-255
Sensitivity
3 Channels
Channel 1 –Red
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue
0-255
Gradual adjustment Blue from 0 –100%
5 Channels
Channel 1 –Red
0-255
Gradual adjustment Red from 0 –100%
Channel 2 –Green
0-255
Gradual adjustment Green from 0 –100%
Channel 3 –Blue
0-255
Gradual adjustment Blue from 0 –100%
Channel 4 –Dimmer intensity
0-255
Gradual adjustment from black to brightest 0 –100%
Channel 5 –Shutter / Strobe (CH1, CH2 and/or CH3 must be used )
0-2
OFF
3-255
Strobe effect, from slow to fast (0-10 flashes/sec.)

18
Maintenance
The EventLite 6/3 requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Switch of the device and then wipe
the cover with a damp cloth. Wipe the front glass panel clean with glass cleaner and a soft cloth. Do
not use alcohol or solvents. The front glass panel will require weekly cleaning, as smoke-fluid tends to
build up residues, reducing the light-output very quickly. Do not immerse in liquid.
Keep connections clean. Disconnect electric power, and then wipe the DMX connections with a
damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric
power.
Troubleshooting
No Light
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect two potential problem areas: the battery and the LED.
1. Battery. Check that the battery is fully charged.
2. The LEDs. Return the EventLite 6/3 to your Showtec dealer.
3. If all of the above appears to be O.K., switch the unit on again.
4. If you are unable to determine the cause of the problem, do not open the EventLite 6/3, as this
may damage the unit and the warranty will become void.
5. Return the device to your Showtec dealer.
Temperature Control Protection
1. When the temperature of the LED board reaches 60°C or if the thermistor check fails, the
temperature protection will kick in and reduce the power output automatically.
Thermistor test failure: The thermistor is damaged, the Thermistor connection is faulty or the
microcomputer port is damaged.
2. Temperature control (LED signal) when the EventLite is powered on:
When the device is powered on, the device will check the temperature working condition.
When the Thermistor test fails, the red LED will light up.
When the Thermistor is working normally, the red LED will be off.
3. Temperature check via LCD display
Press the MODE button and then turn on the EventLite.
If the temperature control is working, the display will show Check-up Tr1: xx（xx is the current LED
board temperature value.
If the temperature control is faulty, the display will show Check-up Tr1: Er.
During this process, the brightness of a faulty device is far below that of a normal device.
Always test the temperature condition before using the EventLite.
No Response to DMX
Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card
malfunction.
1. Check the DMX setting. Make sure that DMX addresses are correct.
2. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical
power. Try your DMX control again.
3. Determine whether the controller or light effect is at fault. Does the controller operate properly
with other DMX products? If not, take the controller in for repair. If so, take the DMX cable and the
light effect to a qualified technician.