Show Tec EVENTSPOT 60 Q7 User manual

Eventspot 60 Q7 V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 42727
MANUAL
ENGLISH

1
Ordercode: 42727
Eventspot 60 Q7
Table of contents
Warning ...............................................................................................................................................................................3
Safety Instructions .........................................................................................................................................................3
Operating Determinations ..........................................................................................................................................5
Rigging ............................................................................................................................................................................5
Connection with the mains.........................................................................................................................................6
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Optional accessories....................................................................................................................................................7
Overview ........................................................................................................................................................................9
Installation...........................................................................................................................................................................9
Set Up and Operation .......................................................................................................................................................9
Charging the built-in battery ......................................................................................................................................9
Control Modes.............................................................................................................................................................10
One Eventspot 60 Q7 (Manual mode) ................................................................................................................10
One Eventspot 60 Q7 (Built-in Programs) ............................................................................................................10
Multiple Eventspots 60 Q7 (Wireless DMX Control) ............................................................................................10
Disconnect from the Wireless DMX signal transmitter .......................................................................................11
Data Cabling...............................................................................................................................................................11
Control Panel ...............................................................................................................................................................12
DMX Control Mode.....................................................................................................................................................12
DMX Addressing ..........................................................................................................................................................12
Menu overview ................................................................................................................................................................13
Main Menu Options ....................................................................................................................................................14
1. Static Colors ..........................................................................................................................................................14
2. DMX Address ........................................................................................................................................................15
3. Built-in programs ..................................................................................................................................................15
4. Personality (DMX channel modes)...................................................................................................................15
5. Edit Mode..............................................................................................................................................................16
6. Settings...................................................................................................................................................................16
6.1. Reset ...................................................................................................................................................................16
6.2. Color....................................................................................................................................................................17
6.3. Dimmer ...............................................................................................................................................................17
6.4. DMX Error............................................................................................................................................................17
7. Safety lock.............................................................................................................................................................17
8. Calibration ............................................................................................................................................................18
8.1. White color calibration ....................................................................................................................................18
8.2. RGB to W calibration .......................................................................................................................................18
8.3. UC calibration ...................................................................................................................................................18
9. Software information...........................................................................................................................................19
10. Reset wireless......................................................................................................................................................19
Optional remote control ...........................................................................................................................................20
Static colors...............................................................................................................................................................21
Built-in programs.......................................................................................................................................................21
DMX Channels .................................................................................................................................................................22
7 Channels HSIC ..........................................................................................................................................................22
10 Channels SSP ..........................................................................................................................................................23
13 Channels TOUR.......................................................................................................................................................24
21 Channels TR16 ........................................................................................................................................................26
Maintenance....................................................................................................................................................................28

2
Ordercode: 42727
Eventspot 60 Q7
Troubleshooting ...............................................................................................................................................................28
No Light.........................................................................................................................................................................28
No Response to DMX..................................................................................................................................................28
Product Specifications....................................................................................................................................................30
Dimensions........................................................................................................................................................................31
Notes ..................................................................................................................................................................................32

3
Ordercode: 42727
Eventspot 60 Q7
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear to be damaged from shipping or the carton
itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box and
packing.
Your shipment includes:
●Showtec Eventspot 60 Q7
●Adapter charger DC 24V (1,75 m)
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

4
Ordercode: 42727
Eventspot 60 Q7
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s lifespan.
Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the lens is obviously damaged, it has to be replaced to prevent its functions from being impaired,
due to cracks or deep scratches.
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Device must be installed out of reach of children. Never leave the unit running
unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement, use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Showtec Eventspot 60 Q7. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electrical connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
Note: WARRANTY on batteries is only 6 months after date of purchase.
When your battery remains dead after fully charging or it doesn’t function or doesn’t charge
anymore, you can order a new battery. The spare part number for the battery is on request.

5
Ordercode: 42727
Eventspot 60 Q7
Operating Determinations
●This device is not designed for permanent operation. Regular operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light-output and the illuminated surface must be bigger than 0,5
meter.
●The maximum ambient temperature ta = 45°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
•If the Eventspot is lowered from the ceiling or high joists, professional trussing systems have to be
used.
•Use a clamp to mount the Eventspot, with the mounting bracket, to the trussing system.
•The Eventspot must never be fixed swinging freely in the room.
•The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
•When rigging, derigging or servicing the Eventspot, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
The Eventspot 60 Q7 can be placed on a flat stage floor or mounted to any kind of truss with a clamp.

6
Ordercode: 42727
Eventspot 60 Q7
Connection with the mains
Connect the device to the mains with the power plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause of the
return. Be sure to properly pack fixture as any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that the fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period, complaints will not be handled anymore.
Complaints will only be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

7
Ordercode: 42727
Eventspot 60 Q7
Description of the device
Features
The Eventspot 60 Q7 is the smallest member of the Eventspot series. Although it has a small size its features
are great. The Eventspot 60 Q7 is equipped with one 7-in-1 LED offering an extremely wide color palette.
●RGBWA-UV-Cyan colormixing
●Wide zoom range
●WDMX
●Compact size
●Input Voltage: 24V DC
●Power consumption at full output: 20W
●LED: 7-in-1 LED (RGBWA-UV-Cyan)
●Operating time at Full On: 6 hours at full RGBWA-UV-Cyan on
●Charging time: 6 hours
●Spare battery: On request
●Control: On-board: LCD-Display
●Control Protocol: DMX512 via wireless DMX512
●Control Personality: HSIC, SSP, TOUR and TR16 (7CH/ 10CH/ 13CH/ 21CH)
●Output (4,5°): 1400 Lux @ 2 meter
●Output (45°): 68 Lux @ 2 meter
●Maximum projection distance: 4m (depending on zoom angle)
●Dimmer: 0-100%
●Strobe: 0-25Hz
●Adjustable zoom angle: 4,5° to 45°
●Field angle: 8° to 55°
●Housing: Polished plastic extrusion
●IP rating: IP54
●Fixture Connection: 24V DC connection
●Cooling: Convection
●Operation Temperature: -20°C ~45°C
●Dimensions: 138 x 102 x 190 mm (LxWxH) (incl. bracket)
●Weight: 1,14 Kg
Note: Knowledge of DMX is required to fully utilize this unit.
Optional accessories
42728 Remote control for Eventspot 60 Q7
42729 Flightcase for Eventspot 60 Q7
50231 Wireless DMX Transceiver
50236 BlackBox F-1 G4 Transceiver

8
Ordercode: 42727
Eventspot 60 Q7
DMX Channel Summary
HSIC
Channel
Description
1
Master Dimmer
2
Hue (color variations)
3
Hue (color variations) fine
4
Red color saturation
5
Color macro’s white
6
Special strobe
7
Dimmer speed
SSP
Channel
Description
1
Master dimmer
2
Red
3
Green
4
Blue
5
White
6
Amber
7
Cyan
8
UV
9
Special strobe
10
Dimmer speed
Tour
Channel
Description
1
Master Dimmer
2
Red
3
Green
4
Blue
5
White
6
Amber
7
Cyan
8
UV
9
Color macros
10
Special strobe
11
Auto program
12
Auto program speed
13
Dimmer speed
TR16
Channel
Description
1
Master Dimmer
2
Master Dimmer Fine
3
Red
4
Red fine
5
Green
6
Green fine
7
Blue
8
Blue fine
9
White
10
White fine
11
Amber
12
Amber fine
13
Cyan
14
Cyan fine
15
UV
16
UV fine
17
Color macros
18
Special strobe
19
Auto program
20
Auto program speed
21
Dimmer speed

9
Ordercode: 42727
Eventspot 60 Q7
Overview
Fig. 01
01) WDMX indicator LED
02) Power indicator LED
03) 1x 7-in-1 LED (RGBWA-UV-Cyan)
04) Infra red sensor
05) Adjustable zoom angle screw
06) Input adapter charger 24V DC 1A
07) Battery charger socket
08) LCD display + control buttons
Installation
Remove all packing materials from the Eventspot 60 Q7. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Charging the built-in battery
01) In order to charge the battery, you need either the included charger for Eventspot 60 Q7 or the
optional flightcase with built-in chargers (42729).
02) Turn off the power.
03) Connect the Eventspot with the included charger.
04) While the battery is charging, the red LED at the front will light up.
05) When the battery is fully charged, the green LED at the front will light up.
Important!
•Do not charge for more than 24 hours.
•Recharge within 3 days of use.
•When charging your Eventspot in the flightcase, make sure that the flightcase is open.
•Store with full load.
•Turn off the power with the menu button at the bottom, when storing for more than 7 days.
•Store in an upright position.

10
Ordercode: 42727
Eventspot 60 Q7
Control Modes
There are 3 modes:
Manual mode (stand alone)
Built-in programs (stand alone)
Wireless DMX (W-DMX)
One Eventspot 60 Q7 (Manual mode)
01) When the Eventspot 60 Q7 is not connected by Wireless DMX, it functions as a stand-alone device.
See page 14 for more information about the manual mode.
One Eventspot 60 Q7 (Built-in Programs)
01) When the Eventspot 60 Q7 is not connected by Wireless DMX, it functions as a stand-alone device.
See page 15 for more information about the built-in programs.
Multiple Eventspots 60 Q7 (Wireless DMX Control)
01) Place the Eventspots at the desired position (see next page for maximum distance).
02) When the WDMX indicator LED (green) is blinking, the fixture is searching for a connection.
03) Connect the transmitter with multiple Eventspots. In order to create a Wireless match, please check
the manual of your wireless signal transmitter.
04) When there is a connection, the indicator LED from the Eventspot will display green.
05) Use a DMX-cable to link the transmitter with a suitable lightcontroller.
Setup example wireless DMX
Fig. 02

11
Ordercode: 42727
Eventspot 60 Q7
Sweden 2.4GHz Wireless communication module
Communication distance:
depending on the transmitting power or transmitter module
Test conditions:
W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor:
60m (approx. through three concrete walls)
Range outdoor:
250m
Wireless DMX connection
The wireless receiving module “Pico G4 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION, only
has a 2.4 GHz wireless signal receiving function. In order to match the wireless signal, please use the
Wireless DMX Micro Transmitter (50231)/ Black Box F-1 G4 MK2 (50236) by WIRELESS SOLUTION. To control
the status of the wireless communication, please look at the green LED indicator light on the front of the
fixture.
Wi-fi Problems:
01) No emitter/sender matching.
The LED Indicator dims for a long period of time.
02) Matching signal with one emitter, but loss of signal communication.
The LED Indicator light will light up for 100ms and then dim for 100ms; The LED will flicker quickly.
03) Communication with an emitter, but no DMX data.
The LED Indicator will light up for 900ms and then dim for 100ms; The LED will flicker slowly.
When the device is in the manual mode or built-in program mode, please ensure that the matching
2.4GHz wireless signal transmitter is OFF.
The Eventspot 60 Q7 is only a WDMX receiver and never a WDMX sender
The Eventspot 60 Q7 has a total of 4 DMX channel configurations, referred as Personalities.
The 4 Personalities are HSIC, SSP, Tour and TR16.
Each of the different personalities can be accessed from the control panel.
Disconnect from the Wireless DMX signal transmitter
The Eventspot 60 Q7 can be disconnected from the wireless DMX signal transmitter.
You can reset the W-DMX in the main menu, see page 19 for more information.
Data Cabling
To link transmitters with lightcontrollers you must obtain data cables. You can purchase DAP Audio
certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to
create your own cable please use data-grade cables that can carry a high quality signal and are less
prone to electromagnetic interference.
DAP Audio DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
•DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
•DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
•DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.

12
Ordercode: 42727
Eventspot 60 Q7
Control Panel
A).LCD Display
B). MENU button
C).ENTER Button
D).UP Button
E). DOWN Button
Fig.03
DMX Control Mode
The fixtures are individually addressed and connected to the W-DMX transmitter. The W-DMX transmitter is
connected to the DMX controller. The fixtures respond to the DMX signal from the controller.
DMX Addressing
The control panel on the bottom of the fixture allows you to assign the DMX fixture address, which is the
first channel from which the Eventspot will respond to the controller. Please note when you use the
controller, the unit has up to 21 channels (in TR16 mode).
When using multiple Eventspots in TR16 mode, make sure you set the DMX addresses right. Therefore, the
DMX address of the first Eventspot should be 1(d001); the DMX address of the second Eventspot should
be 1+21=22 (d022); the DMX address of the third Eventspot should be 22+21=43 (d043), etc. Please, be
sure that you don’t have any overlapping channels in order to control each Eventspot correctly. If two or
more Eventspots are addressed similarly, they will work similarly.
Controlling: After having addressed all Eventspots, you may now start operating these via your lighting
controller.
Note: After switching on, the Eventspot will automatically detect whether DMX 512 data is received or
not. If not, the problem may be:
•The XLR cable from the controller is not connected with the input of the W-DMX transmitter.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Display Off after 30 seconds
When no button is pressed for 30 seconds, the display will turn off.
To light up the display, you have to press one of the buttons: MENU, ENTER, UP or DOWN.
Once you have pressed the buttons, the display will light up.

13
Ordercode: 42727
Eventspot 60 Q7
Menu overview

14
Ordercode: 42727
Eventspot 60 Q7
Main Menu Options
01) Upon start-up, the display will interchangeably show two screens:
02) Press the ENTER button to open the main menu. The display will show:
03) Press the UP/DOWN buttons to toggle between the 10 menus.
04) Press the ENTER button to open the desired menu.
05) Press the MENU button to return to the previous screen.
1. Static Colors
With this menu, you can set the static colors.
01) While in the main menu, press the UP/DOWN buttons to choose STATIC.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to toggle between the static colors (RED, GREEN, BLUE, WHITE, AMBER,
CYAN AND UV) and STROBE.
04) Once you have chosen the desired color, press the ENTER button to enter the edit menu.
05) Press the UP/DOWN buttons to adjust the color intensity. The adjustment range is between 0-255,
from dark to brightest.
06) Press the ENTER button to proceed to STROBE. Press the UP/DOWN buttons to increase/decrease the
strobe frequency. The adjustment range is between 0-25, from OFF to high strobe frequency.
07) You can combine RED, GREEN, BLUE, WHITE, AMBER, CYAN and UV to create an infinite range of
colors (0-255).

15
Ordercode: 42727
Eventspot 60 Q7
2. DMX Address
With this menu you can set the device’s DMX starting address.
01) While in the main menu, press the UP/DOWN buttons to choose ADDRESS.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001-
512.
04) The device will remember the DMX address after switching off.
3. Built-in programs
With this menu, you can choose a built-in program or custom program.
01) While in the main menu, press the UP/DOWN buttons to choose AUTO.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AUTO1-AUTO10)
and 10 presets (PROGRAM1-PROGRAM10) which can be edited in Edit mode (see page 16).
04) If you have chosen one of the programs (AUTO1-AUTO10), press the ENTER button to proceed to the
program speed settings.
05) Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0-255, from
slow to fast.
06) The device will now run the desired built-in program.
07) If you have chosen one of the custom programs (PROGRAM1-PROGRAM10), the device will
immediately run the selected custom program.
4. Personality (DMX channel modes)
With this menu, you can set the desired DMX channel mode (personality).
01) While in the main menu, press the UP/DOWN buttons to choose PERSONALITY.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to toggle between the following DMX channel modes:
HSIC:
7 channels
SSP:
10 channels
TOUR:
13 channels
TR16:
21 channels

16
Ordercode: 42727
Eventspot 60 Q7
5. Edit Mode
With this menu, you can create your own custom programs.
01) While in the main menu, press the UP/DOWN buttons to choose EDIT.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to choose the desired custom program (PROGRAM1 –PROGRAM 10).
04) Each custom program has 30 scenes, which can be edited. Press the ENTER button to proceed the
editing of the desired program (PROGRAM1 –PROGRAM 10).
05) Press the UP/DOWN buttons to select the desired scene (SCENE-01 - SCENE-30).
06) Press the ENTER button to enter the scene settings.
07) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE, WHITE, AMBER, CYAN, UV, STROBE,
TIME and FADE options.
08) If you have chosen RED, GREEN, BLUE, WHITE,AMBER, CYAN OR UV press the ENTER button to open
the menu.
09) Press the UP/DOWN buttons to increase/decrease the LED intensity. The adjustment range is
between 0-255, from OFF to FULL ON.
10) If you have chosen STROBE, press the ENTER button to open the menu.
11) Press the UP/DOWN buttons to set the strobe frequency. The adjustment range is between 0-25, from
OFF to high frequency.
12) If you have chosen TIME, press the ENTER button to open the menu.
13) Press the UP/DOWN buttons to set the duration of a scene. The adjustment range is between 0-255,
from 0 to 255 seconds.
14) If you have chosen FADE, press the ENTER button to open the menu.
15) Press the UP/DOWN buttons to set the fade time between particular scenes. The adjustment range is
between 0-255, from 0 to 255 seconds.
6. Settings
With this menu you can set the device’s settings.
01) While in the main menu, press the UP/DOWN buttons to choose SETTING.
02) Press the ENTER button to open the menu.
03) Insert the password in order to access the menu. Press the buttons in the following order: UP, DOWN,
UP, DOWN and press the ENTER button to confirm.
04) Press the UP/DOWN buttons to toggle between the following menus: Reset, Color, Dimmer and DMX
Error. The display will show:
6.1. Reset
With this menu, you can reset the custom programs.
01) While in SETTING menu, press the UP/DOWN buttons to choose RESET.
02) Press the ENTER button to open the menu.
03) Insert the password in order to access the menu. Press the buttons in the following order: UP, DOWN,
UP, DOWN and press the ENTER button to confirm.
04) When the process is finished, the display will show “OK”. The custom programs have been reset to the
factory default settings.

17
Ordercode: 42727
Eventspot 60 Q7
6.2. Color
With this menu, you can adjust the color calibration functions.
01) While in SETTING menu, press the UP/DOWN buttons to choose COLOR.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 3 options: RGBW, OFF or UC.
04) If you have chosen RGBW, then RGB to WHITE is active. This means RGB = 255, 255, 255. The displayed
color is the one which you set in CALIBRATION > RGBW menu (8. Calibration, page 18).
05) If you have chosen OFF, the RGB values are not adjusted and the output is the most powerful.
06) If you have chosen UC, the RGB output is adjusted to a universal color which you can set in
CALIBRATION > UC menu (8. Calibration, page 18). In this way, different Eventspot versions are color-
balanced in order to match each other.
6.3. Dimmer
With this menu, you can adjust the dimmer speed.
01) While in SETTING menu, press the UP/DOWN buttons to choose DIMMER.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (DIM1-DIM4, from fast to
slow) and OFF.
04) If you choose OFF, then RGBW and the master dimmer will be linear.
6.4. DMX Error
With this menu, you can determine the device’s behaviour in case of a DMX signal error.
01) While in SETTING menu, press the UP/DOWN buttons to choose DMX ERROR.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options: BLACK and SAVE.
04) If you have chosen BLACK, the Eventspot will blackout, in case of a DMX signal error.
05) If you have chosen SAVE, the Eventspot will fall back on the last working DMX signal, which will
ensure undisrupted performance.
7. Safety lock
With this menu you can select whether the safety lock is active or not.
01) While in the main menu, press the UP/DOWN buttons to choose KEY.
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to toggle between ON and OFF.
04) If you have chosen ON and when the display turns off after remaining idle for 30 seconds, you will
need to insert the password in order to access the main menu (press the buttons in the following
order: UP, DOWN, UP, DOWN and press the ENTER button to confirm).
05) If you have chosen OFF, the main menu will remain unlocked.

18
Ordercode: 42727
Eventspot 60 Q7
8. Calibration
With this menu, you can calibrate the device’s colors.
01) While in the main menu, press the UP/DOWN buttons to choose CALIBRATION.
02) Press the ENTER button to open the menu.
03) Insert the password in order to access the menu. Press the buttons in the following order: UP, DOWN,
UP, DOWN and press the ENTER button to confirm. The display will show:
04) Press the UP/DOWN buttons to toggle between WHITE (white color calibration), RGBW (RGBW
calibration) and UC (Universal Color correction).
8.1. White color calibration
With this menu you can adjust the temperature of the built-in white color presets.
01) If you have chosen WHITE, press the ENTER button to open the menu. The display will show:
02) Press the UP/DOWN buttons to choose one of the 12 white color presets: WHITE-01 –WHITE-12.
03) Once you have chosen the desired preset, press the ENTER button to open the submenu.
04) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE, WHITE, AMBER, CYAN and UV.
05) Press the ENTER button to select a desired color.
06) Press the UP/DOWN buttons to increase/decrease the intensity of the chosen color. The adjustment
range of each color is between 0-255, from OFF to FULL ON.
07) To toggle now between the colors you have to use the ENTER button or press the MENU button to
return to the previous screen.
8.2. RGB to W calibration
With this menu you can adjust the temperature of the white color by means of RGB colors.
01) If you have chosen RGB to W, press the ENTER button to open the submenu.
02) Press the UP/DOWN buttons to toggle between RED, GREEN and BLUE.
03) Once you have chosen the desired color, press the ENTER button to edit.
04) Press the UP/DOWN buttons to set the color intensity. The adjustment range is between 0-255, from
OFF to FULL ON.
05) To toggle now between the colors you have to use the ENTER button or press the MENU button to
return to the previous screen.
8.3. UC calibration
With this menu you can adjust the universal color of the device.
01) If you have chosen UC, press the ENTER button to open the submenu.
02) Press the UP/DOWN buttons to toggle between RED, GREEN, BLUE, WHITE, AMBER, CYAN and UV.
03) Once you have chosen the desired color, press the ENTER button to edit.
04) Press the UP/DOWN buttons to set the color intensity. The adjustment range is between 0-255, from
OFF to FULL ON.
05) To toggle now between the colors you have to use the ENTER button or press the MENU button to
return to the previous screen.

19
Ordercode: 42727
Eventspot 60 Q7
9. Software information
With this menu you can view the currently installed software version.
01) While in the main menu, press the UP/DOWN buttons to choose INFO.
02) Press the ENTER button to open the menu.
03) Press the ENTER button again to access the submenu.
04) You can now view the currently installed software version.
10. Reset wireless
With this menu you can reset the wireless connection with the transmitter.
01) While in the main menu, press the UP/DOWN buttons to choose WIRELESS.
02) Press the ENTER button to open the menu. The display will show:
03) Press the ENTER button again to access the submenu.
04) Press the UP/DOWN buttons to toggle between the 2 options: YES and NO.
05) If you choose YES you have to press the ENTER button to confirm.
06) The display will show “RESETTING”.
07) After a few seconds the wireless link with the transmitter is interrupted.
08) The WDMX indicator LED (green) will blink.
09) Now you can use a different transmitter to make a wireless connection.