Show Tec Helix S5000 Q4 User manual

Helix S5000 Q4 V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 43725
MANUAL
ENGLISH

1
Ordercode: 43725
Helix S5000 Q4
Table of contents
Warning ...............................................................................................................................................................................4
Safety Instructions .........................................................................................................................................................4
Operating Determinations ..........................................................................................................................................6
Rigging ............................................................................................................................................................................6
Connection with the mains.........................................................................................................................................8
Return Procedure..........................................................................................................................................................8
Claims..............................................................................................................................................................................8
Description of the device.................................................................................................................................................9
Features ..........................................................................................................................................................................9
Overview ......................................................................................................................................................................10
Installation.........................................................................................................................................................................11
Installing the Barndoor (43726).................................................................................................................................11
Installing the Beamshapers (43727/43728/43729).................................................................................................12
Installing the Tophat (43730).....................................................................................................................................13
Set Up and Operation .....................................................................................................................................................14
Control Modes.............................................................................................................................................................14
One Helix (Auto, Built-in Programs).......................................................................................................................14
One Helix (Manual Mode) .....................................................................................................................................14
Multiple Helixes (Master / Slave Control).............................................................................................................14
Multiple Helixes (DMX Control) ..............................................................................................................................15
Multiple Helixes (Wireless DMX Control)...............................................................................................................16
Wireless DMX Connection ......................................................................................................................................16
Wireless DMX Problems ...........................................................................................................................................16
Example 1..................................................................................................................................................................17
Example 2..................................................................................................................................................................18
Fixture Linking...............................................................................................................................................................19
Data Cabling...............................................................................................................................................................19
Control Panel ...............................................................................................................................................................20
DMX Control Mode.....................................................................................................................................................20
DMX Addressing ..........................................................................................................................................................20
Menu Overview...........................................................................................................................................................21
Main Menu Options....................................................................................................................................................23
1. DMX Settings .........................................................................................................................................................23
1.1. Address ...............................................................................................................................................................24
1.2. Channels ............................................................................................................................................................24
1.3. Signal...................................................................................................................................................................24
1.4. W-DMX Unlock...................................................................................................................................................25
2. Manual Mode.......................................................................................................................................................25
3. Auto Mode............................................................................................................................................................25
4. Built-in Programs...................................................................................................................................................26
4.1. Program 01.........................................................................................................................................................26
4.2. Programs 02-26..................................................................................................................................................27
5. Master/Slave Mode.............................................................................................................................................27
6. Settings...................................................................................................................................................................28
6.1. Curves Select.....................................................................................................................................................28
6.2. Dimmer Speed ..................................................................................................................................................29
6.3. Fan Speed..........................................................................................................................................................29
6.4. Pixel Dir................................................................................................................................................................30
6.5. PWM Frequency ...............................................................................................................................................30
6.6. Backlight Time ...................................................................................................................................................30
6.7. DMX Fail..............................................................................................................................................................31
6.8. DMX Sync ...........................................................................................................................................................31
6.9. Lock.....................................................................................................................................................................31
6.10. Key Backlight...................................................................................................................................................32

2
Ordercode: 43725
Helix S5000 Q4
6.11. Factory..............................................................................................................................................................32
7. Information............................................................................................................................................................32
DMX Channels .............................................................................................................................................................33
4 Channels ................................................................................................................................................................33
6 Channels ................................................................................................................................................................33
8 Channels ................................................................................................................................................................34
20 Channels ..............................................................................................................................................................36
24 Channels ..............................................................................................................................................................37
Maintenance....................................................................................................................................................................39
Troubleshooting ...............................................................................................................................................................40
No Light.........................................................................................................................................................................40
No Response to DMX..................................................................................................................................................40
Product Specifications....................................................................................................................................................41
Dimensions........................................................................................................................................................................42

3
Ordercode: 43725
Helix S5000 Q4

4
Ordercode: 43725
Helix S5000 Q4
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showtec Helix S5000 Q4
●Schuko to Neutrik PowerCON True1 power cable (1,5 m)
●6 x quick-locks
●2 x quick-lock brackets
●4 x rubber feet
●1 x mounting bracket
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving your lifespan expectancy is of a higher priority, place care in providing
for lower operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual

5
Ordercode: 43725
Helix S5000 Q4
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never place any material over the lens.
●Never look directly into the light source.
●Never leave any cables lying around.
●Do not insert objects into air vents.
●Do not connect this device to a dimmer pack.
●Do not switch the device on and off in short intervals, as this would reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Only use device indoors, avoid contact with water or other liquids.
●Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always keep case closed while operating.
●Always allow free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●If the lens is obviously damaged, it has to be replaced, so that its functions are not impaired due to
cracks or deep scratches.
●If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●For adult use only. Device must be installed out of the reach of children. Never leave the unit running
unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●The user is responsible for correct positioning and operating of the Helix. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.

6
Ordercode: 43725
Helix S5000 Q4
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light output and the illuminated surface must be bigger than 0,5
meter.
●The maximum ambient temperature ta = 40°C must never be exceeded.
●In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely
disconnect from power source via breaker or by unplugging.
●The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself!
Always let the installation be carried out by an authorized dealer!
Procedure:
●If the Helix is lowered from the ceiling or high joists, professional trussing systems have to be used.
●Use a clamp to mount the Helix, with the mounting bracket, to the trussing system.
●The Helix must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●When rigging, derigging or servicing the Helix, always make sure, that the area below the installation
place is blocked and staying in the area is forbidden.

7
Ordercode: 43725
Helix S5000 Q4
The Helix S5000 Q4 can be placed on a flat stage floor, by means of the included mounting bracket, or
be mounted to any kind of truss with clamps and quick-locks.
Improper installation can cause serious damage to people and property!

8
Ordercode: 43725
Helix S5000 Q4
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

9
Ordercode: 43725
Helix S5000 Q4
Description of the device
Features
The Showtec Helix S5000 Q4 is a high-power panel light with IP65 protection grade. It has an extremely
high light output and is very suitable for illumination of larger indoor and (temporarily) outdoor areas.
●Wireless DMX (Wireless Solutions)
●Quick-locks for fast rigging and mounting
●DMX control via standard DMX controller
●Onboard: OLED display for easy setup
●Input voltage: 100-240V AC, 50/60Hz
●Power consumption: 415W
●Peak power: 810W
●Light source: 40 x Prolight Opto RGBW 4-in-1 10W LEDs
●Light output @ 2m: 54000 lux
●Refresh rate: 3.0 kHz
●DMX modes: 4, 6, 8, 20, 24 channels
●Dimmer: 0-100%
●Strobe: 0-20Hz
●Beam angle: 10°
●Control mode: Auto, Built-in programs, Manual, Master/Slave, DMX512, W-DMX
●Housing: Die-cast aluminum
●Power connectors: Neutrik PowerCON True1 IN/OUT
●Data connectors: 5-pin XLR-HD DMX IN/OUT
●Cooling: Cooling fans
●IP rating: IP65
●Working temperature: -10°C ~40°C
●Dimensions: 530 x 125 x 318 mm (LxWxH)
●Weight: 11,5 kg
Note: Knowledge of DMX is required to fully utilize this unit.
Optional accessories
43726 –Barndoor for Helix S5000 Q4
43727 –Beamshaper for Helix S5000 Q4 (20°)
43728 –Beamshaper for Helix S5000 Q4 (45°)
43729 –Beamshaper for Helix S5000 Q4 (15°x60°)
43730 –Tophat for Helix S5000 Q4
50177 –W-DMX™BlackBox F-1 G5 Transceiver
50178 –W-DMX™BlackBox F-2 G5 Transceiver
D7249 –Case for 4 x Helix 4000

10
Ordercode: 43725
Helix S5000 Q4
Overview
Fig. 01
01) 40 x Prolight Opto RGBW 4-in-1 10W LEDs
02) 5-pin DMX connector IN
03) 5-pin DMX connector OUT
04) 100-240V Neutrik PowerCON True1 power connector OUT
05) 100-240V Neutrik PowerCON True1 power connector IN
06) OLED display + control buttons
07) Pressure valve
This valve manages the air pressure within the Helix’s enclosure. It allows the enclosure to breathe,
equalizes pressure and reduces condensation while filtering out liquids and other contaminants. By
doing so, it increases the Helix’s performance and durability.
08) Antenna for wireless DMX
09) Adjustment screw

11
Ordercode: 43725
Helix S5000 Q4
Installation
Remove all packing materials from the Helix S5000 Q4. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Installing the Barndoor (43726)
01) Pull on the spring-loaded locking screws, on both sides of the barndoor, to unlock the mechanism.
Fig. 02
02) Place the barndoor on the Helix, to secure the barndoor’s screws in the Helix’s mounting holes.
Fig. 03
03) Release both locking screws to lock the barndoor in position.

12
Ordercode: 43725
Helix S5000 Q4
Installing the Beamshapers (43727/43728/43729)
01) In order to install the beamshaper, place it on the lens of the Helix. The beamshaper is equipped with
multiple magnets which keep it firmly in position.
02) In order to remove the beamshaper, pull it by the handles located on its sides.
Fig. 04

13
Ordercode: 43725
Helix S5000 Q4
Installing the Tophat (43730)
01) Pull on the spring-loaded locking screws, on both sides of the tophat, to unlock the mechanism.
Fig. 05
02) Place the tophat on the Helix, to secure the tophat’s screws in the Helix’s mounting holes.
Fig. 06
03) Release both locking screws to lock the tophat in position.

14
Ordercode: 43725
Helix S5000 Q4
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Control Modes
There are 6 modes:
●Auto
●Built-in Programs
●Manual
●Master/Slave
●DMX512 (4CH, 6CH, 8CH, 20CH, 24CH)
●Wireless DMX control
One Helix (Auto, Built-in Programs)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Helix is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see pages 25-27 for more information about Auto and Built-in programs.
One Helix (Manual Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Helix is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see page 25 for more information about Manual mode.
Multiple Helixes (Master / Slave Control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 5-pin XLR cable to connect the Helix.
The pins:
01) Earth
02) Signal (-)
03) Signal (+)
04) N/C
05) N/C
05) Link the units as shown in fig. 07. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units. You can use the
same functions on the master device as described on pages 23-27. This means that you can set your
desired operation mode on the master device and all slave devices will react the same as the
master device.
Multiple Helixes (Master/Slave Set Up)
Fig. 07

15
Ordercode: 43725
Helix S5000 Q4
Multiple Helixes (DMX Control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 5-pin XLR cable to connect the Helix and other devices.
05) Link the units as shown in fig. 08. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units.
06) Supply electric power: Plug electric mains power cords into each unit's PowerCON True1 socket, then
plug the other end of the mains power cord into proper electric power supply sockets, starting with
the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Helixes (DMX Set Up)
Fig. 08
Note: Link all cables before connecting electric power!

16
Ordercode: 43725
Helix S5000 Q4
Multiple Helixes (Wireless DMX Control)
You can use the Helix in a wireless DMX setup. Make sure the device is operating in wireless DMX mode,
which can be set in the main menu (see pages 24-25 for more information).
Sweden 2.4GHz Wireless Communication Module
Communication distance:
depending on the transmitting power or transmitter module
Test conditions:
W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor:
60 m (approx. through three concrete walls)
Range outdoor:
250 m
Wireless DMX Connection
The wireless receiving module “Nano G5 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION,
only has a 2.4 GHz wireless signal receiving function. In order to establish a wireless connection, please
use the Wireless DMX BlackBox F-1 G5 Transceiver (50177) or the Wireless DMX BlackBox F-2 G5 Transceiver
(50178). To control the status of the wireless communication, please look at the green LED indicator light
on the left side of the display.
Note: When the Helix receives a wireless DMX signal, then this signal will also be present at its 5-pin DMX
output (03). However, the Helix has not been designed to send wireless signals. Therefore, always
connect the Helix devices to each other using a DMX cable.
Wireless DMX Problems
01) No signal from the W-DMX transmitter.
The LED indicator will blink quickly.
02) Proper connection with the W-DMX transmitter, but no DMX signal is present.
The LED indicator will blink slowly.
When the wireless DMX communication is unhindered and a DMX signal is present, the LED indicator will
always be on.
The Helix S5000 Q4 cannot receive a Wireless DMX signal
and a DMX cable signal at the same time
When the device is in Auto mode or Built-in Programs mode, please ensure that the paired 2.4GHz
wireless signal transmitter is OFF.
The Helix S5000 Q4 is only a WDMX receiver and never a WDMX transmitter

17
Ordercode: 43725
Helix S5000 Q4
Example 1
The Helix cannot send any wireless signals. Therefore, the slave Helix fixtures must always be connected
via a DMX signal cable.
The Helix S5000 Q4 is only a WDMX receiver and never a WDMX transmitter
When the Helix operates in DMX or Slave mode, it can receive a wireless DMX signal (CH1-512) and at the
same time it can also send a DMX signal, via its DMX output (03), through a DMX cable.
Fig. 09

18
Ordercode: 43725
Helix S5000 Q4
Example 2
The Showtec Operator Air (50726) sends out a wireless signal with 512 channels and the Helix picks up this
signal.
Connect the Helix to the wireless DMX signal transmitter
The Helix S5000 Q4 cannot actively search for wireless signal transmitters.
In order to pair the Helix with the wireless signal transmitter, please check the manual of the wireless signal
transmitter you use.
It is recommended to use the Wireless DMX BlackBox F-1 G5 Transceiver (50177) or the Wireless DMX
BlackBox F-2 G5 Transceiver (50178).
Disconnect from the Wireless DMX signal transmitter
The Helix can be disconnected from the wireless DMX signal transmitter.
It is possible to deactivate W-DMX in the main menu, see pages 24-25 for more information.
Fig. 10

19
Ordercode: 43725
Helix S5000 Q4
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master / slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link @110V: 3 fixtures
Maximum recommended number of fixtures on a power link @240V: 7 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
●DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
●DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
●DAP Audio data cable FL08 DMX/AES-EBU, XLR/M 5-pin > XLR/F 5-pin.Ordercode FL08150 (1,5 m),
FL083 (3 m), FL086 (6 m), FL0810 (10 m), FL0820 (20 m).
●DAP Audio DMX adapter: 5-pin/3-pin. Ordercode FLA29.
●DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
●DAP Audio DMX Terminator 3-pin. Ordercode FLA42.
●DAP Audio DMX Terminator 5-pin. Ordercode FLA43.
Note: connect the Helix S5000 Q4 with the dedicated special XLR cables for outdoor use.
FL83150 –Neutrik DMX Cable 5-pin XLR IP65 (1,5 m)
FL833 –Neutrik DMX Cable 5-pin XLR IP65 (3 m)
FL836 –Neutrik DMX Cable 5-pin XLR IP65 (6 m)
FL8310 –Neutrik DMX Cable 5-pin XLR IP65 (10 m)
FL8320 –Neutrik DMX Cable 5-pin XLR IP65 (20 m)