Show Tec Par 64 LED-120Z-Q4 User manual

Par 64 LED-120Z-Q4 V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 42540
MANUAL
ENGLISH

1
Ordercode: 42540
Par 64 LED-120Z-Q4
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Frontside..........................................................................................................................................................................7
Backside .........................................................................................................................................................................8
Installation...........................................................................................................................................................................8
Set Up and Operation .......................................................................................................................................................8
Color Frame Retaining Clip.........................................................................................................................................9
Manual Zoom Adjustment...........................................................................................................................................9
Control Modes.............................................................................................................................................................10
One Par (Manual, Color Macros/Color Programs) ...........................................................................................10
Multiple Pars (Master/Slave control) ....................................................................................................................10
Multiple Pars (DMX Control)...................................................................................................................................11
Fixture Linking...............................................................................................................................................................12
Data Cabling...............................................................................................................................................................12
Control Panel ...............................................................................................................................................................13
Control Mode ..............................................................................................................................................................13
DMX Addressing ..........................................................................................................................................................13
Menu Overview...........................................................................................................................................................14
Main Menu Options....................................................................................................................................................15
1. DMX-512 Mode ....................................................................................................................................................15
2. DMX Channel Modes..........................................................................................................................................16
3. Master/Slave.........................................................................................................................................................16
4. Slave Modes .........................................................................................................................................................16
5. Color Macros/Color Programs ..........................................................................................................................17
6. DMX Fail .................................................................................................................................................................17
7. Dimming Curves...................................................................................................................................................18
8. Dimmer Speed .....................................................................................................................................................19
9. Display Settings ....................................................................................................................................................19
10. Display Inversion.................................................................................................................................................19
11. Manual Mode ....................................................................................................................................................19
12. Test........................................................................................................................................................................20
13. Temperature .......................................................................................................................................................20
14. Total Operation Time ........................................................................................................................................20
15. Reset ....................................................................................................................................................................20
16. Software Version ................................................................................................................................................20
DMX Channels .............................................................................................................................................................20
4 Channels ................................................................................................................................................................20
7 Channels ................................................................................................................................................................21
11 Channels ..............................................................................................................................................................21
Maintenance....................................................................................................................................................................23
Replacing the Fuse.....................................................................................................................................................23
Troubleshooting ...............................................................................................................................................................23
No Light.........................................................................................................................................................................23
No Response to DMX..................................................................................................................................................24
Product Specifications....................................................................................................................................................25
Dimensions........................................................................................................................................................................26

2
Ordercode: 42540
Par 64 LED-120Z-Q4
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showtec Par 64 LED-120Z-Q4
●1 x color frame
●Pro power cable (1,2 m)
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.

3
Ordercode: 42540
Par 64 LED-120Z-Q4
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
●Never place any material over the lens.
●Never look directly into the light source.
●Never leave any cables lying around.
●Do not connect this device to a dimmer pack.
●Do not switch the device on and off in short intervals, as this will reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Only use the device indoors, avoid contact with water or other liquids.
●Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always keep the case closed while operating.
●Always allow a free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●If the lens is obviously damaged, it has to be replaced.
●If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●For replacement use fuses of same type and rating only.
●The user is responsible for correct positioning and operating of the Par. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.

4
Ordercode: 42540
Par 64 LED-120Z-Q4
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
●In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely
disconnect from power source via breaker or by unplugging.
●The maximum ambient temperature ta= 40°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●If the Par is lowered from the ceiling or high joists, professional trussing systems have to be used.
●Use a clamp to mount the Par with the mounting bracket to the trussing system.
●The Par must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●When rigging, derigging or servicing the Par, always make sure, that the area below the installation
site is secured and that there are not any unauthorized people around.

5
Ordercode: 42540
Par 64 LED-120Z-Q4
The Par can be mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

6
Ordercode: 42540
Par 64 LED-120Z-Q4
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the
fixture. Be prepared to provide the model number, serial number and a brief description of the cause for
the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.

7
Ordercode: 42540
Par 64 LED-120Z-Q4
Description of the device
Features
The Par 64 LED-120Z-Q4 is a LED parcan fixture, with high output and great effects.
●Input voltage: 100-240V AC, 50/60Hz
●Power consumption: 142W
●Power factor: >0,8
●DMX channels: 4, 7, 11 channels
●Light source: 1 x 120W RGBA ProLightOpto LED
●Light output @12°:
Red: 4180 Lumen @2m
Green: 6850 Lumen @2m
Blue: 342 Lumen @2m
Amber: 7950 Lumen @2m
Full ON: 17180 Lumen @2m
●Output distance: >10m
●Refresh rate: 3 kHz
●Control modes: Color macros/Color programs, Manual, Master/Slave, DMX-512
●Control protocol: DMX-512
●Dimmer: 0-100%
●Strobe: 0-20Hz
●Beam angle: 12°, 15°, 20°, 25°, 30°, 35° (Manual Zoom)
●Housing: Aluminum
●Cooling: Cooling fan
●Connections: Pro power connector Blue IN/Gray OUT & 3-pin DMX IN/OUT
●IP rating: IP20
●Fuse: T2AL/250V
●Dimensions: 445 x 290 x 400 mm (LxWxH)
●Weight: 3,8 kg
Frontside
Fig. 01
01) Mounting bracket with inclination screws
02) Color frame retaining clip
03) 1 x 120W RGBA ProLightOpto LED

8
Ordercode: 42540
Par 64 LED-120Z-Q4
Backside
Fig. 02
04) 3-pin DMX signal connector IN
05) 3-pin DMX signal connector OUT
06) 4-digit LED display + control buttons
07) Fuse T2AL/250V
08) 100-240V pro power connector (Blue) IN
09) 100-240V pro power connector (Gray) OUT
10) Ground/earth connection
11) Safety eye
Installation
Remove all packing materials from the Par 64 LED-120Z-Q4. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.

9
Ordercode: 42540
Par 64 LED-120Z-Q4
Color Frame Retaining Clip
01) Press and hold down the color frame retaining clip.
02) Insert the color frame into the bracket.
03) Release the color frame retaining clip in order to secure the color frame in position.
Fig. 03
Manual Zoom Adjustment
01) Press and hold down the manual zoom clip.
02) Move the clip up or down, in order to set the desired beam angle (12°, 15°, 20°, 25°, 30°, 35°).
Fig. 04

10
Ordercode: 42540
Par 64 LED-120Z-Q4
Control Modes
There are 4 modes:
●Color Macros/Color Programs
●Manual
●Master/Slave
●DMX-512 (4CH, 7CH, 11CH)
One Par (Manual, Color Macros/Color Programs)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Par is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 17 and 19 for more information about Color macros/Color programs and Manual
mode.
Multiple Pars (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Par.
The pins:
01) Earth
02) Signal -
03) Signal +
04) Link the units as shown in fig. 05. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 17 and 19 (Color
macros/Color programs and Manual mode). This means that you can set your desired operation
mode on the master device and all slave devices will react the same as the master device.
Multiple Pars (Master/Slave control)
Fig. 05

11
Ordercode: 42540
Par 64 LED-120Z-Q4
Multiple Pars (DMX Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Pars and other devices.
04) Link the units as shown in fig. 06. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's Pro power socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Pars DMX Set Up
Fig. 06
Note : Link all cables before connecting electric power

12
Ordercode: 42540
Par 64 LED-120Z-Q4
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link @110V: 12 fixtures
Maximum recommended number of fixtures on a power link @240V: 25 fixtures
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
●DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
●DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
●DAP Audio data cable FL08 DMX/AES-EBU, XLR/M 5-pin > XLR/F 5-pin.Ordercode FL08150 (1,5 m),
FL083 (3 m), FL086 (6 m), FL0810 (10 m), FL0820 (20 m).
●DAP Audio DMX adapter: 5-pin/3-pin. Ordercode FLA29.
●DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
●DAP Audio DMX Terminator 3-pin. Ordercode FLA42.
●DAP Audio DMX Terminator 5-pin. Ordercode FLA43.

13
Ordercode: 42540
Par 64 LED-120Z-Q4
The Par 64 LED-120Z-Q4 can be operated with a controller in control mode or without the controller in
stand-alone mode.
Control Panel
A) 4-digit LED display
B) MENU button
C) UP button
D) DOWN button
E) ENTER button
Fig. 07
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture addresses, which is the first
channel with which the Par will respond to the controller.
Please note, when you use the controller, the unit has 11 channels.
When using multiple Pars, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Par should be 1(001); the DMX address of the second Par should
be 1+11=12 (012); the DMX address of the third Par should be 12+11=23 (023), etc. Please, be sure that
you do not have any overlapping channels in order to control each Par correctly. If two or more Pars are
addressed similarly, they will work similarly.
Controlling:
After having addressed all Par fixtures, you may now start operating these via your lighting controller.
Note: After switching on, the Par will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
If not, the problem may be:
●The XLR cable from the controller is not connected with the input of the Par.
●The controller is switched off or defective, the cable or connector is defective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 40 seconds
When no button is pressed for 40 seconds, the display will turn off.
To light up the display, you have to press the MENU, UP, DOWN or ENTER button.
Once you have pressed the button, the display will light up.

14
Ordercode: 42540
Par 64 LED-120Z-Q4
Menu Overview

15
Ordercode: 42540
Par 64 LED-120Z-Q4
Main Menu Options
Upon start-up the display will show . Press the MENU button to enter the main menu.
1. DMX-512 Mode
2. DMX Channel Modes
3. Master/Slave
4. Slave Modes
5. Color Macros/Color Programs
6. DMX Fail
7. Dimming Curves
8. Dimmer Speed
9. Display Settings
10. Display Inversion
11. Manual Mode
12. Test
13. Temperature
14. Total Operation Time
15. Reset
16. Software Version
1. DMX-512 Mode
In this menu you can set the DMX address.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN button to set the desired DMX address. The address range is between 001-512.
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.

16
Ordercode: 42540
Par 64 LED-120Z-Q4
2. DMX Channel Modes
In this menu you can set the desired channel mode.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 following channel modes:
4-channel mode
7-channel mode
11-channel mode
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.
3. Master/Slave
In this menu you can set the device as a master or a slave.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 2 options:
Master
Slave (all slave devices will react the same as the master device)
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.
4. Slave Modes
In this menu you can set the desired slave mode.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 2 slave modes:
Normal slave mode
Mirror slave mode
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.

17
Ordercode: 42540
Par 64 LED-120Z-Q4
5. Color Macros/Color Programs
In this menu you can set color macros and color programs.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 10 options: .
04) If you have chosen , press the ENTER button to open the menu. Press the UP/DOWN buttons to
choose one of the 64 color macros . Press the ENTER button to confirm your
choice.
05) If you have chosen one of the color programs , press the ENTER button to open
the menu.
06) Press the UP/DOWN buttons to set the color program speed. The adjustment range is between
, from slow to fast.
07) Press the ENTER button to save your settings.
List of Color Programs
64 color macros
RGB color flow
RGBA color flow
RGB color flow + Amber ON
4-color switch
10-color switch
Red, fade IN/OUT
Green, fade IN/OUT
Blue, fade IN/OUT
Amber, fade IN/OUT
6. DMX Fail
In this menu you can set the device’s behavior in case of a DMX failure.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 2 options:
The device will black out the light output
The device will use the last properly received DMX signal, ensuring
undisrupted performance
04) Press the ENTER button to confirm your choice.
05) Press and hold down the MENU button for 2 seconds, until the display shows , to save your
settings.

18
Ordercode: 42540
Par 64 LED-120Z-Q4
7. Dimming Curves
In this menu you can set the dimming curves.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimming curves:
Linear
Square
Inverted Square
S-Curve
04) Press the ENTER button to confirm your choice.

19
Ordercode: 42540
Par 64 LED-120Z-Q4
8. Dimmer Speed
In this menu you can set the dimmer speed.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 2 options:
Smooth
Fast
04) Press the ENTER button to confirm your choice.
9. Display Settings
In this menu you can set the display settings.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 2 options:
Display continuously ON
Display OFF after 40 seconds
04) Press the ENTER button to confirm your choice.
10. Display Inversion
In this menu you can set the display inversion.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 2 options:
Normal view
Inverted view
04) Press the ENTER button to confirm your choice.
11. Manual Mode
In this menu you can set Manual mode.
01) In main menu, press the MENU button until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle through the static colors (RED, GREEN, BLUE, AMBER), Strobe
and Dimmer.
04) Once you have chosen the desired color, press the ENTER button to open the menu.
05) Press the UP/DOWN buttons to adjust the LED brightness. The adjustment range is between 0-255,
from dark to brightest.
06) When the display shows , press the ENTER button to open the menu.
07) Press the UP/DOWN buttons to set the strobe frequency. The adjustment range corresponds with the
DMX channel assigned to the strobe function (DMX channel # 7, page 21).
08) When the display shows , press the ENTER button to open the dimmer settings.
09) Press the UP/DOWN buttons to adjust the dimmer brightness. The adjustment range is between 0-255,
from dark to brightest.
10) You can combine RED, GREEN, BLUE and AMBER to create an infinite range of colors (0-255).