Pioneer DDJ-WeGO4-W User manual

Operating Instructions
http://pioneerdj.com/support/
http://rekordbox.com/
For FAQs and other support information for this product, visit the above site.
DJ Controller
DDJ-WEGO4

En
2
Contents
How to read this manual
!Thank you for buying this Pioneer DJ product.
Be sure to read this manual and the “Operating Instructions (Quick
Start Guide)” included with the unit. Both documents include
important information that you should understand before using this
product.
!In this manual, names of menus displayed on the product and on
the computer screen, as well as names of buttons and terminals,
etc., are indicated within brackets. (E.g.: [File], [CUE] button, and
[PHONES] output terminals)
!Please note that the screens and specifications of the software
described in this manual as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
!Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
!Please note that the language of the software screens described
in this Operating Instructions may differ from the language of the
actual screens.
This manual consists mainly of explanations on the functions of the
hardware of this unit. For details on operating the DJ software, see the
Operating Instructions of the DJ software.
Before start
Features....................................................................................................... 3
What’s in the box ........................................................................................ 3
Part names and functions
Top panel of unit ......................................................................................... 4
Rear panel ................................................................................................... 7
Side panel.................................................................................................... 7
Using WeDJ for iPhone / iPad
About WeDJ for iPhone / iPad................................................................... 8
Connections ................................................................................................ 8
Start up the system..................................................................................... 9
Operation..................................................................................................... 9
WeDJ Advanced Operation ..................................................................... 10
Using djay 2 for iPhone / iPad, vjay for iPhone /
iPad
Before using djay 2 for iPhone / iPad or vjay for iPhone / iPad ............ 13
Connections .............................................................................................. 13
Start up the system................................................................................... 14
Operation................................................................................................... 14
Using djay 2 for Android
Before using djay 2 for Android............................................................... 16
Connections .............................................................................................. 16
Start up the system................................................................................... 18
Checking the audio device settings (only when Android 4.4) .............. 18
Operation................................................................................................... 18
Using rekordbox
Viewing the manuals................................................................................ 20
Install rekordbox ....................................................................................... 20
Preparing rekordbox................................................................................. 22
Adding track files to [Collection]............................................................ 24
rekordbox Advanced Operation............................................................... 25
Using VirtualDJ LE 8
Before installing VirtualDJ LE 8 .............................................................. 28
Installing VirtualDJ LE 8 ........................................................................... 29
About the driver software and setting utility software........................... 30
Connections .............................................................................................. 31
Start up the system................................................................................... 32
Operation................................................................................................... 32
Changing the settings
Launching utilities mode ......................................................................... 34
Utilities modes .......................................................................................... 34
Changing the settings with rekordbox.................................................... 34
About the driver software and setting utility software........................... 35
Additional information
Troubleshooting........................................................................................ 36
Using as a controller for other DJ software............................................ 37
About trademarks and registered trademarks ...................................... 38
Cautions on copyrights ............................................................................ 38

En 3
Before start
Before start
Features
This unit is a compact size DJ Controller that enables DJ performances
using dynamic sound changes and a wide variety of light changes. DJing
can be enjoyed not just with a computer but also with an iPhone / iPad.
The “PULSE CONTROL” function is provided to enable a wide variety of
changes in light color using the LEDs of this unit.
Furthermore, an AC adapter and USB bus power are supported for the
power source of this unit, enabling enjoyment of a DJ life that matches
the preferences and style of the user.
Hybrid DJ Controller
DJ Controller for enjoying DJ on a computer and on an iPhone / iPad.
The user can use either a computer or iPhone / iPad depending on the
situation so DJing can be enjoyed in a variety of DJ scenes.
iPhone / iPad CONNECTION
The content of an iPhone / iPad can be easily used for DJ performances
by connecting this unit and the iPhone / iPad with the cable included
with the iPhone / iPad.
In addition, since the iPhone / iPad can be recharged even while DJing,
DJ performances can be enjoyed without needing to worry about the
remaining battery charge.
PULSE CONTROL
Stages DJ performance in animations with a fusion of sound and light.
When a track is loaded, LED light flows toward the jog dial, staging so
that the user knows at a glance that the track has been loaded.
Also, the LED light rotates during the playback of a track so that the user
can know at an instant that a track is playing.
Design
Achieves a flat, compact size that is easy to carry around, and does not
take up space when installed, for a smart, casual design.
Uses a round layout letting first-time DJ users to enjoy DJ without
feelings of difficulty and an aluminum panel on top that accentuates
simplicity.
In addition, a blue LED is mounted on the JOG dial to realize a fusion
of sound and light in the FX PULSE or other function, and this serves
to stage the DJ performance feel, and the enjoyment of sound
manipulation.
Compatibility with various DJ software
programs
Since it is compatible with MIDI, a variety of DJ software can be used to
perform hot cue, sampler, or other operations.
For the latest software support status, see the Pioneer DJ support site
below.
http://pioneerdj.com/support/
What’s in the box
!Operating Instructions (Quick Start Guide)
!AC adapter
!Power cord
!USB cable
!Warranty (for some regions)1
!rekordbox dj license key card
!Virtual DJ LE 8 license key card
1The warranty is included for European region only.
—For the North American region, the corresponding information is
provided on the last page of both the English and French versions
of the “Operating Instructions (Quick Start Guide)”.
—For the Japanese region, the corresponding information is pro-
vided on the last page of the “Operating Instructions (Quick Start
Guide)”.
Caution
The license key cannot be reissued. Be careful not to lose it.

En
4
Part names and functions
Top panel of unit
343
4 124
1 Power section
This switches this unit’s power between on and standby.
2 Browser section
This selects the tracks to play and loads them into each deck.
3 Deck section
The deck section is used to control the two decks. There are controls
and buttons for operating deck 1 on the left side of the controller,
controls and buttons for operating deck 2 on the right side of the
controller.
4 Mixer section
This controls level adjustment of each channel, track mixing, etc.
The functions of the buttons and controls are when combined with
rekordbox dj or WeDJ.
For details on the functions when combined with djay 2, vjay, or Virtual
DJ LE 8, see [DDJ-WeGO4] of the [DJ CONTROLLER] category from the
[SOFTWARE INFORMATION] page of the Pioneer DJ site below.
http://www.pioneerdj.com/en/support/software-information/
Power section
2
1
1 STANDBY/ON indicator
Shows the unit power status.
0When red
The unit power is on standby.
0When green
The unit power is on.
2 uSTANDBY/ON button
0When unit power is on standby
—Press:
Turn on the power of this unit.
0When unit power is on
—Press for over 1 second:
Set this unit’s power to the standby mode.
Browser section
1 1
2
1 LOAD button
Press:
Loads the selected tracks into the respective decks.
Press (twice):
Loads the tracks loaded in the deck on the opposite side into the
deck whose [LOAD] button was pressed. When this is done while a
track is playing, the track is played from the same position. (Instant
Doubles) (rekordbox dj)
[SHIFT] + press:
Sorts the track list when one of the [LOAD] buttons is pressed.
(rekordbox dj)
!The tracks are sorted by BPM on the channel 1 side and by artist
on the channel 2 side.
2 Rotary selector
Turn:
Moves the cursor vertically. (rekordbox dj)

En 5
Part names and functions
In the case of the top screen, switches to the browse screen. In the
browse screen, moves the cursor vertically. (WeDJ)
Press:
Moves between the tree view and track list or opens a folder.
(rekordbox dj)
!When the playlist palette is displayed, the cursor moves between
playlists in addition to the tree view and track list.
!The tree view, track list, and playlist palette are in the browse sec-
tion of rekordbox dj. For details on the role of each of them, see
the Operating Instructions of rekordbox.
Pressing the rotary selector moves to the next level of the browser
screen. (WeDJ)
—Example: [Artist] > Artist list
[SHIFT] + press:
Moves between the tree view and track list or closes a folder.
(rekordbox dj)
Pressing the rotary selector moves to the previous level of the
browser screen. (WeDJ)
—Example: [Artist] < Artist list
Deck section
d
a
d
9
7
1 TEMPO slider
Adjusts the track playing speed.
2 Jog dial
Turn top:
Performs scratching operation.
Turn outer section:
The pitch bend operation (adjustment of the playing speed) is
possible.
[SHIFT] + Turn top:
Skips the playback position.
3 HOT CUE/SAMPLER mode switching button
Switches the performance button mode to hot cue mode or sampler
mode.
4 HOT CUE mode indicator
Lights up when the performance buttons are in hot cue mode.
5 SAMPLER mode indicator
Lights up when the performance buttons are in sampler mode.
6 Performance buttons
0When in hot cue mode
—Press:
Sets the hot cue point.
—[SHIFT] + press:
Delete the hot cue set for that button.
0When in sampler mode
—Press:
Plays the sampler slot.
—[SHIFT] + press:
Stops playback of the sampler slot. (rekordbox dj)
Plays a different type of sampler slot. (WeDJ)
7 PLAY/PAUSE fbutton
Plays or pauses a track.
8 CUE button
Press:
Sets the cue point. Or moves to a cue point.
[SHIFT] + press:
Moves the playing position to the beginning of the track.
9 SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
a SYNC button
Press:
Synchronizes with the tempos (pitches) and beat grids of the deck
set as the master for synchronization automatically. (rekordbox dj)
This enables automatically synchronizing with the tempos (pitches)
and beat grids of the deck opposite to the pressed deck. (WeDJ)
[SHIFT] + press:
Sets the deck whose button is pressed as the master deck for syn-
chronization. (rekordbox dj)
b Loop half button
Press:
Set the width of loop playback interval to 1/2 times.
[SHIFT] + press:
Sets a loop in point.
c Loop button
Press:
Turns auto beat loop on.
Turns loop playback off during loop playback.
[SHIFT] + press:
Sets a loop out point and starts loop playback.
d Loop double button
Press:
Set the width of loop playback interval to 2 times.
0During loop playback
—[SHIFT] + press:
Cancels loop playback. (Loop Exit)
0After canceling loop playback
—[SHIFT] + press:
Resumes the loop playback that was set last time. (Reloop)
e FX button
Press:
The pad FX is on while the button is pressed.
[SHIFT] + press:
A different type of pad FX is on while the button is pressed.

En
6
Mixer section
1
5
3
6
7
2
5
3
6
4 4
8
a
9
1 MIC LEVEL control
Adjusts the level of audio input to the [MIC] input terminals.
!When not using a microphone, set the volume to the minimum
level.
2 MASTER LEVEL control
Adjusts the level of the audio output from the [MASTER] output
terminals.
!This is not linked with [MASTER] of rekordbox dj.
3 EQ HI control
Adjusts the high range of the respective channels.
4 EQ LOW control
Adjusts the low range of the respective channels.
!With rekordbox dj and WeDJ, this can be switched to the adjust-
ment function of the middle range in [Preferences] of the
application.
5 FILTER control
Applies the filter effect for the respective channel.
The original sound is output when the control is at the center
position.
Turn counterclockwise: Gradually descends the low-pass filter’s cut-
off frequency.
Turn clockwise: Gradually rises the high-pass filter’s cutoff
frequency.
!When using FILTER with rekordbox dj, display the CFX panel and
then click the [FILTER] button to turn FILTER on.
!With rekordbox dj and WeDJ, this can be switched to the
adjustment function of the low range in [Preferences] of the
application.
6 Channel fader
Adjusts the level of audio signals output in each channel.
7 Crossfader
Switches the sound of the channels assigned to the left and right
sides of the crossfader for output.
8 HEADPHONES LEVEL control
Adjusts the level of audio output from the [PHONES] output
terminals.
9 HEADPHONES CUE MASTER selection button
Outputs the master sound from the headphones.
!When the button is pressed again, the output is canceled.
a HEADPHONES CUE 1/2 selection button
Outputs the sound of the pressed channels from the headphones.
!When the button is pressed again, the output is canceled.
Cautions for using the iPhone / iPad stand
iPhone / iPad stand
!This stand is exclusively for use with an iPhone / iPad. Do not place a
tablet other than a supported model or a large device on the stand.
!Set the iPhone / iPad in the horizontal direction on the stand. It may
be unstable if set in the vertical direction.
!Do not apply excessive force to the stand. Doing so may damage this
unit.
!Please note that Pioneer will accept no responsibility whatsoever for
damage to or malfunction of the device, injury, etc., due to the device
falling, etc.
!Do not move the unit with an iPhone / iPad placed on the stand. The
iPhone / iPad may fall off.
!If there is a cover on the iPhone / iPad, remove the cover before plac-
ing the iPhone / iPad on the stand. If the cover is left on, the iPhone /
iPad may be unstable.

En 7
Part names and functions
Rear panel
4 5
2
6
7
1
3
1 Cord hook
Secure the AC adapter’s power cord and USB cable on this hook.
!This prevents the power cord and USB cable from being acci-
dentally pulled and the plugs from being disconnected from the
terminals.
!If the AC adapter’s power cord or the USB cable is disconnected
during operation, the sound may be interrupted or the unit may
restart.
AC adapter’s power cord
Cord hook USB cable
2 DC IN terminal
Connect the DC plug of the included AC adapter.
!Connect the power cord after all the connections between
devices have been completed.
!Be sure to use the power cord and AC adapter included with this
product.
3 USB-B terminal
Connect to a computer or Android device.
!Be sure to connect directly using the USB cable included with
this product.
!A USB hub cannot be used.
!When connecting with an Android device, a separately sold USB
conversion cable is required.
Select a USB conversion cable matching the shape of the USB
terminal of your Android device.
!The brightness of the buttons and JOG illumination that light is
dimmed when running on USB bus power.
4 USB-A terminal
Connect to an iPhone / iPad.
!Be sure to connect directly using the cable included with the
iPhone / iPad.
!A USB hub cannot be used.
!When connecting an iPhone / iPad, connect the AC adapter. This
unit cannot run on USB bus power.
!This unit can recharge an iPhone / iPad using the cable included
with the iPhone / iPad.
!An iPhone / iPad cannot be charged when the power of the
iPhone / iPad is off or when there is no battery power remaining.
5 Kensington security slot
This hole is used to attach an anti-theft wire lock.
6 MASTER output terminals (RCA pin jacks)
Connect speakers with a built-in amplifier, power amplifier, etc.
!Unbalanced output is supported.
7 MIC input terminal (1/4” TS jack)
Connects a microphone here.
!Supports unbalanced input only.
Side panel
1
1 PHONES output terminals (1/4” stereo phone jack and
3.5 mm stereo mini jack)
Both stereo phone plugs (Ø6.3 mm) and stereo mini phone plugs
(Ø3.5 mm) can be used.
!Connect stereo headphones with an impedance of 32 Wor
higher. Headphones with an impedance less than 32 Wand
mono headphones are not supported.
!Do not connect headphones simultaneously to the stereo phone
jack and the stereo mini-phone jack.

En
8
Using WeDJ for iPhone / iPad
About WeDJ for iPhone / iPad
!WeDJ for iPhone / iPad is an application that enables DJ perfor-
mances with an iPhone / iPad.
!WeDJ for iPhone / iPad can be purchased from the App Store.
System requirements
WeDJ for iPad WeDJ for iPhone
iOS iOS 10, 9, 8 iOS 10, 9, 8
Compatible
models
iPad Pro (9.7-inch), iPad
Air 2, iPad Air, iPad mini 4,
iPad mini 3, iPad mini 2
iPhone 7, iPhone 7 Plus,
iPhone 6s, iPhone 6s Plus,
iPhone 6, iPhone 6 Plus,
iPhone SE, iPhone 5s
!For information on the latest system requirements, compatibility,
and supported operating systems, see [DDJ-WeGO4] of the [DJ
CONTROLLER] category from the [SOFTWARE INFORMATION]
page of the Pioneer DJ support site below.
http://www.pioneerdj.com/en/support/software-information/
!There is no guarantee that operation will be possible on all iPhones
and iPads meeting the above system requirements.
!Depending on the power-saving settings and other conditions of the
iPhone or iPad, performance may be insufficient.
!Problems may occur with operation depending on the other software
that you use.
!For the latest system requirements for WeDJ for iPhone / iPad, check
the App Store.
!An Internet connection is required to access App Store.
Connections
1 Connect speakers with a built-in amplifier, a power
amplifier, etc. to the [MASTER] output terminals of this
unit.
!An audio cable (RCA) is not included with this product. Please pro-
vide it yourself separately.
RL
Speakers with built-in amplifier,
power amplifier, etc.
!For details on connecting the input/output terminals, see page 7.
!Set the volume of the device connected to the [MASTER] terminals
(speakers with built-in amplifier, power amplifier, etc.) to an appropri-
ate level. Note that the output sound may be loud if the volume is set
too high.
2 Connect headphones to an [PHONES] output terminal
of this unit.
!Connect stereo headphones with an impedance of 32 Wor higher.
Headphones with an impedance less than 32 Wand mono head-
phones are not supported.
!Do not connect headphones simultaneously to the stereo phone jack
and the stereo mini-phone jack.
To headphones
Headphones cord
Headphones
For checking
the output sound
3 Connect this unit and the iPhone / iPad using the
cable included with the iPhone / iPad.
!Be sure to connect directly using the cable included with the iPhone
/ iPad. A USB hub cannot be used.
iPad Pro (9.7-inch),
iPad Air 2, iPad Air,
iPad mini 4, iPad mini 3,
iPad mini 2
Cable included with iPhone / iPad
iPhone 7, iPhone 7 Plus,
iPhone 6s, iPhone 6s Plus,
iPhone 6, iPhone 6 Plus,
iPhone SE, iPhone 5s
4 Connect the included DC plug of the AC adapter to
this unit and then connect the power cord.
!Connect the power cord after all the connections between devices
have been completed.
!Be sure to use the power cord and AC adapter included with this
product.

En 9
Using WeDJ for iPhone / iPad
DC plug
AC adapter (included)
Power cord (included)
To power outlet
Start up the system.
1 Turn on the power of the iPhone / iPad.
2 Press the [STANDBY/ON] button of this unit to turn
on the power of the unit.
After the startup illumination ends, the unit is ready for use.
3 Turn on the power of the device (speakers with
built-in amplifier, power amplifier, etc.) connected to the
output terminals.
4 Launch WeDJ for iPhone / iPad.
Operation
Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
1 Turn the rotary selector to switch to the browse
screen.
2 Turn the rotary selector to move the cursor to
[TRACKS] in the browse screen.
3 Press the rotary selector to move the cursor to the
track list.
!If the rotary selector is pressed while pressing the [SHIFT] button,
the cursor moves to the [TAG LIST] / [TRACKS] / [PLAYLISTS] /
[ARTISTS] / [ALBUMS] / [REC LIST] / [HISTORY] selection areas in
the browse screen.
4 Turn the rotary selector to select a track in [TRACKS]
and then press the [LOAD] button of deck 1 (left side).
The track is loaded into the deck.
Playing a music file
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
EQ (HI, LOW) controls Center
FILTER control Center
Channel fader Moved forward
MASTER LEVEL control Turned fully counterclockwise
Crossfader Center
2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
Sound is output from the speakers.

En
10
Monitoring sound with headphones
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
[HEADPHONES LEVEL] control Turned fully counterclockwise
2 Press the [HEADPHONES SELECT 1] button.
3 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Inputting the sound of the microphone
The sound of the microphone connected to the [MIC] input terminal can
be mixed.
1 Connect the microphone to the [MIC] input terminal.
2 Turn the [MIC LEVEL] control to adjust the audio level
of the microphone.
Quitting the system
1 Quit WeDJ for iPhone / iPad.
2 Press the [STANDBY/ON] button until the unit enters
standby.
WeDJ Advanced Operation
For the detailed operating procedures, see the introduction video in
WeDJ.
Using hot cues
Playback can be started instantaneously from the position at which a
hot cue is set. In addition to hot cues, loops can be set and called out
instantaneously.
!Up to four hot cue points can be set and saved per track.
0Setting and calling out a hot cue
1 When the [HOT CUE] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the hot cue mode and the indicator lights.
2 Press a performance button to set a hot cue point
during playback or pause.
Hot cue points are assigned to the respective performance buttons as
shown below.
[1]Hot cue A
[2]Hot cue B
[3]Hot cue C
[4]Hot cue D
3 Press the performance button with the hot cue point
set.
Playback starts from the hot cue point.
!A set hot cue point can be cleared by pressing a performance button
while pressing the [SHIFT] button.
0Setting and calling out an auto beat loop
1 When the [HOT CUE] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the hot cue mode and the indicator lights.
2 Press the loop half button or loop double button to
set the length of the auto beat loop.
3 Press the loop button during playback.
The auto beat loop starts.
4 Press a performance button during auto beat loop
playback to set the loop.
5 Press the performance button with the loop set.
Loop playback starts from the loop in point of the set loop.
!A set loop can be cleared by pressing a performance button while
pressing the [SHIFT] button.

En 11
Using WeDJ for iPhone / iPad
0Setting and calling out a manual loop
1 When the [HOT CUE] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the hot cue mode and the indicator lights.
2 Press the loop half button while pressing the [SHIFT]
button during playback and then press the loop button.
Loop playback starts.
3 Press a performance button during loop playback to
set the loop.
4 Press the performance button with the loop set.
Loop playback starts from the loop in point of the set loop.
!A set loop can be cleared by pressing a performance button while
pressing the [SHIFT] button.
Using the sampler function
The tracks loaded in the sampler slots of the sampler can be played with
the performance buttons.
0Using the performance buttons to play the
sampler
1 When the [SAMPLER] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the sampler mode and the indicator lights.
2 Move the [SAMPLER VOL] fader in WeDJ upward.
[SAMPLER VOL] is displayed if you press the [ ] button.
3 Press a performance button.
The sound of the slot assigned to the button that was pressed is played.
!The first sampler bank is assigned to the respective button.
4 Press a performance button while pressing the [SHIFT]
button.
The sound of the slot assigned to the button that was pressed is played.
!The second sampler bank is assigned to the respective button.
0Loading a sample sound source into a sampler
slot
An internal sample sound source can be loaded from the sampler area
of the WeDJ screen.
1 When the [SAMPLER] indicator is off, press the
[HOT CUE/SAMPLER] mode switching button.
The unit switches to the sampler mode and the indicator lights.
2 Select the sampler pack.
Touch [b] to select from the internal sampler pack list.
An internal sample sound source can also be loaded into each slot.
Using the pad FX
A wide range of effect performances are possible with just the simple
operation of pressing and releasing buttons.
0Turning pad FX on using the [FX] button
1 Press and hold down the [FX] button or press and
hold down the [FX] button while pressing the [SHIFT]
button.
The effect turns on according to the effect assigned to the button and
number of beats settings that was pressed.
Without [SHIFT]With [SHIFT]
[FX 1]Effect A Effect B
[FX 2]Effect A Effect C
[FX 3]Effect A Release FX A
!The effects assigned to the [FX] buttons can be customized.
(Customize the effects while this unit is in a connected state.)
2 Release your finger from the [FX] button.
The effect turns off.
0Customizing effects
Effects can be customized from the PAD FX area of the WeDJ screen.
Select an effect
Touch [b] to select from the internal effect list.
Using CFX
Effects can be obtained with just the simple operation of turning a
control.
0Turning CFX on using the [FILTER] control
The effect is applied to the audio of the corresponding
channel by turning the [FILTER] control.

En
12
0Customizing CFX
Effects can be customized from the CFX area of the
WeDJ screen.
Select CFX.
Touch [b] to select from the internal effect list.
!If the CFX area is not displayed, turn on [CFX] in the [Controller]
item of [Settings] in WeDJ.
Using recording functions
WeDJ has recording functions and can record mixed sound.
1 Touch in the WeDJ screen to start recording.
2 Touch again to stop recording.
!When the recording completes, the file is automatically saved to
[REC LIST].

En 13
Using djay 2 for iPhone / iPad, vjay for iPhone / iPad
Using djay 2 for iPhone / iPad, vjay for iPhone
/ iPad
Before using djay 2 for iPhone / iPad
or vjay for iPhone / iPad
djay 2 for iPhone / iPad and vjay for iPhone / iPad can be purchased from
App Store. Also check the latest system requirements.
!If you already have djay 2 for iPhone / iPad or vjay for iPhone / iPad,
update it to the latest version.
Caution
djay 2 for iPhone / iPad and vjay for iPhone / iPad are products of algorid-
dim GmbH. Pioneer DJ basically does not accept inquiries on how to
operate djay 2 for iPhone / iPad and vjay for iPhone / iPad.
For the functions of djay 2 for iPhone / iPad and vjay for iPhone /
iPad and the operating procedures, see [DDJ-WeGO4] of the [DJ
CONTROLLER] category from the [SOFTWARE INFORMATION] page of
the Pioneer DJ support site below.
http://www.pioneerdj.com/en/support/software-information/
System requirements
The system requirements for combining this unit and djay 2 for iPhone /
iPad or vjay for iPhone / iPad are as follows.
For the latest system requirements for djay 2 for iPhone / iPad and vjay
for iPhone / iPad, check the App Store.
djay 2 for
iPad
vjay for
iPad
djay 2 for
iPhone
vjay for
iPhone
iOS iOS 10, 9, 8
Compatible
models
iPad Pro (9.7-inch), iPad
Air 2, iPad Air, iPad mini 4,
iPad mini 3, iPad mini 2, iPad
mini, iPad (4th generation),
iPad (3rd generation), iPad2
iPhone 7, iPhone 7 plus,
iPhone SE, iPhone 6s plus,
iPhone 6s, iPhone 6 plus,
iPhone 6, iPhone 5s, iPhone
5c, iPhone 5, iPhone 4s, iPod
touch (6th generation), iPod
touch (5th generation)
!For information on the latest system requirements, compatibility,
and supported operating systems, see [DDJ-WeGO4] of the [DJ
CONTROLLER] category from the [SOFTWARE INFORMATION]
page of the Pioneer DJ support site below.
http://www.pioneerdj.com/en/support/software-information/
!Operation is not guaranteed on all iPhones and iPads, even those
meeting the system requirements described above.
!Depending on the power-saving settings and other conditions of the
iPad or iPhone, performance may be insufficient.
!Problems may occur with operation depending on the other software
that you use.
!An Internet connection is required to access App Store.
Connections
1 Connect speakers with a built-in amplifier, a power
amplifier, etc. to the [MASTER] output terminals of this
unit.
!An audio cable (RCA) is not included with this product. Please pro-
vide it yourself separately.
RL
Speakers with built-in amplifier,
power amplifier, etc.
!For details on connecting the input/output terminals, see page 7.
!Set the volume of the device connected to the [MASTER] terminals
(speakers with built-in amplifier, power amplifier, etc.) to an appropri-
ate level. Note that the output sound may be loud if the volume is set
too high.
2 Connect headphones to an [PHONES] output terminal
of this unit.
!Connect stereo headphones with an impedance of 32 Wor higher.
Headphones with an impedance less than 32 Wand mono head-
phones are not supported.
!Do not connect headphones simultaneously to the stereo phone jack
and the stereo mini-phone jack.
To headphones
Headphones cord
Headphones
For checking
the output sound
3 Connect this unit and the iPhone / iPad using the
cable included with the iPhone / iPad.
!Be sure to connect directly using the cable included with the iPhone
/ iPad. A USB hub cannot be used.

En
14
iPhone 4s
iPad (3rd generation), iPad2
iPad Pro (9.7-inch),
iPad Air 2, iPad Air,
iPad (4th generation),
iPad mini 4, iPad mini 3,
iPad mini 2, iPad mini
iPhone 7, iPhone 7 Plus,
iPhone SE, iPhone 6s plus,
iPhone 6s, iPhone 6 plus,
iPhone 6, iPhone 5s,
iPhone 5c, iPhone 5,
iPod touch (5th generation),
iPod touch (6th generation)
Cable included with iPhone / iPad
4 Connect the included DC plug of the AC adapter to
this unit and then connect the power cord.
!Connect the power cord after all the connections between devices
have been completed.
!Be sure to use the power cord and AC adapter included with this
product.
DC plug
AC adapter (included)
Power cord (included)
To power outlet
Start up the system.
1 Turn on the power of the iPhone / iPad.
2 Press the [STANDBY/ON] button of this unit to turn
on the power of the unit.
After the startup illumination ends, the unit is ready for use.
3 Turn on the power of the device (speakers with
built-in amplifier, power amplifier, etc.) connected to the
output terminals.
4 Start djay 2 for iPhone / iPad or vjay for iPhone / iPad
The Pioneer DJ logo appears. The following is a display example of djay
2 for iPad.
Caution
If the screen above does not appear even after waiting a while, dis-
connect the iPhone / iPad connection cable connector inserted in
the iPhone or iPad and then repeat the procedure from step 3 of
Connections again.
If the screen above still does not appear, restart the iPhone or iPad
after performing the procedure up to step 2 of Start up the system. and
then perform step 3 of Start up the system..
Operation
Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
Turn the rotary selector to select a track in [Musiclibrary]
and then press the [LOAD] button of deck 1 (left side).
The track is loaded into the deck.

En 15
Using djay 2 for iPhone / iPad, vjay for iPhone / iPad
Playing a music file
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
EQ (HI, LOW) controls Center
FILTER control Center
Channel fader Moved forward
MASTER LEVEL control Turned fully counterclockwise
Crossfader Center
2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
Sound is output from the speakers.
Monitoring sound with headphones
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
[HEADPHONES LEVEL] control Turned fully counterclockwise
2 Press the [HEADPHONES SELECT 1] button.
3 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Inputting the sound of the microphone
The sound of the microphone connected to the [MIC] input terminal can
be mixed.
1 Connect the microphone to the [MIC] input terminal.
2 Turn the [MIC LEVEL] control to adjust the audio level
of the microphone.
Quitting the system
1 Quit djay 2 for iPhone / iPad or vjay for iPhone / iPad.
2 Press the [STANDBY/ON] button until the unit enters
standby.

Using djay 2 for Android
Before using djay 2 for Android
djay 2 for Android can be purchased from Google Play. Also check the
latest system requirements.
!If you already have djay 2 for Android, update it to the latest version.
Caution
djay 2 for Android is a product of algoriddim GmbH. Pioneer DJ basically
does not accept inquiries on how to operate djay 2 for Android.
For the functions and operating procedures of djay 2 for Android, see
[DDJ-WeGO4] of the [DJ CONTROLLER] category from the [SOFTWARE
INFORMATION] page of the Pioneer DJ support site below.
http://www.pioneerdj.com/en/support/software-information/
System requirements
Android version 6.0, 5.1, 5.0, 4.4
Cable A USB conversion cable (sold separately) is required.
Internet connection An Internet connection is required to access Google
Play.
Others Your Android device must support the USB host mode.
!For information on the latest system requirements, compatibility,
and supported operating systems, see [DDJ-WeGO4] of the [DJ
CONTROLLER] category from the [SOFTWARE INFORMATION]
page of the Pioneer DJ support site below.
http://www.pioneerdj.com/en/support/software-information/
!There is no guarantee that operation will be possible on all Android
devices.
!The cable included with the Android device cannot be used.
!Charging an Android device is not possible.
Connections
When the version of your Android device
is 6.0, 5.1, or 5.0
1 Connect speakers with a built-in amplifier, a power
amplifier, etc. to the [MASTER] output terminals of this
unit.
RL
Speakers with built-in amplifier,
power amplifier, etc.
2 Connect headphones to an [PHONES] output terminal
of this unit.
!Connect stereo headphones with an impedance of 32 Wor higher.
Headphones with an impedance less than 32 Wand mono head-
phones are not supported.
!Do not connect headphones simultaneously to the stereo phone jack
and the stereo mini-phone jack.
To headphones
Headphones cord
Headphones
For checking
the output sound
3 Connect this unit and the USB conversion cable (sold
separately) with the included USB cable.
Select a USB conversion cable matching the shape of the USB terminal
of your Android device.
!Be sure to connect directly using the USB cable included with this
product. A USB hub cannot be used.
!The power cable included with the Android device cannot be con-
nected to the [USB-A] terminal of this unit.
Shape of terminal of
Android device Shape of conversion cable connectors
USB micro A terminal USB micro A (male) to USB A (female)
USB micro B terminal USB micro B (male) to USB A (female)
USB Type-C terminal USB Type-C (male) to USB A (female)
4 Connect the USB conversion cable to your Android
device.
djay2
USB conversion cable
To USB port
Android device
USB cable (included)
En
16

En 17
Using djay 2 for Android
5 Connect the included DC plug of the AC adapter to
this unit and then connect the power cord.
DC plug
AC adapter (included)
Power cord (included)
To power outlet
When the version of your Android device
is 4.4
R
L
djay2
R
L
Android
device
To headphones
Headphones cord
Headphones
For checking
the output sound
Split cable
For audio output
1
3
2
To headphone
connection
terminal
Right
(R)
Left
(L)
Audio input
To audio input
terminals
Audio cable
Component, amplifier,
powered speaker, etc.
1 Connect a split cable (sold separately) to the
headphones terminal of the Android device.
A split cable is a cable for splitting the audio output from the stereo
headphones jack into an L channel and R channel.
2 Use a 3.5 mm stereo mini jack (male) to RCA male
conversion cable (sold separately) to connect speakers
with a built-in amplifier or a powered amplifier to the L
channel of the split cable.
The [MASTER] output terminals of this unit cannot be used.
3 Connect headphones to the R channel of the split
cable.
The [PHONES] output terminals of this unit cannot be used.
4 Connect this unit and the USB conversion cable (sold
separately) with the included USB cable.
Select a USB conversion cable matching the shape of the USB terminal
of your Android device.
!Be sure to connect directly using the USB cable included with this
product. A USB hub cannot be used.
!The power cable included with the Android device cannot be con-
nected to the [USB-A] terminal of this unit.
Shape of terminal of
Android device Shape of conversion cable connectors
USB micro A terminal USB micro A (male) to USB A (female)
USB micro B terminal USB micro B (male) to USB A (female)
USB Type-C terminal USB Type-C (male) to USB A (female)
5 Connect the USB conversion cable to your Android
device.
djay2
USB conversion cable
To USB port
Android device
USB cable (included)
6 Connect the included DC plug of the AC adapter to
this unit and then connect the power cord.
DC plug
AC adapter (included)
Power cord (included)
To power outlet

Start up the system
1 Turn on the power of the Android device.
2 Press the [STANDBY/ON] button of this unit to turn
on the power of the unit.
After the startup illumination ends, the unit is ready for use.
3 Turn on the power of the peripheral device (speakers
with built-in amplifier, power amplifier, etc.).
4 Launch djay 2 for Android.
The Pioneer DJ logo appears.
!If the Pioneer DJ logo is not displayed, disconnect the USB conver-
sion cable from the USB terminal of your Android device and then
reconnect it.
Checking the audio device settings
(only when Android 4.4)
1 Tap [ ].
2 Turn [Sprit output] on.
3 Tap [ ] at the top right of the screen to exit the
audio device settings.
Operation
Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
1 Tap the [ ] of djay 2 for Android and then tap the
[My Music] button.
![Musiclibrary] appears.
2 Tap the track you wish to load.
The track is loaded into the deck.
Playing a music file
!If the sound becomes distorted or playback becomes unstable when
the tempo of a track has been adjusted with the key lock on, turn the
key lock off.
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
EQ (HI, LOW) controls Center
FILTER control Center
Channel fader Moved forward
MASTER LEVEL control Turned fully counterclockwise
Crossfader Center
2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
En
18

En 19
Using djay 2 for Android
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers (only when Android 6.0, 5.1, or 5.0).
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
!If sound is not output from the [MASTER] output terminals or the
level of the output sound is low, increase the volume of the Android
device.
Sound is output from the speakers.
Monitoring sound with headphones
(only when Android 6.0, 5.1, or 5.0)
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
[HEADPHONES LEVEL] control Turned fully counterclockwise
2 Set the crossfader to the position of the deck 2 side
(right side).
The headphone monitor of the deck 1 side (left side) turns on.
!djay 2 for Android turns on the headphone monitor of the deck on the
side opposite to the position of the crossfader.
3 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Inputting microphone sound (only when
Android 6.0, 5.1, or 5.0)
The sound of the microphone connected to the [MIC] input terminal can
be mixed.
1 Connect the microphone to the [MIC] input terminal.
2 Turn the [MIC LEVEL] control to adjust the audio level
of the microphone.
Quitting the system
1 Quit djay 2 for Android.
2 Press the [STANDBY/ON] button until the unit enters
standby.

Using rekordbox
Viewing the manuals
Various instructions are sometimes provided as files in PDF format.
Adobe®Reader®must be installed in order to view PDF format files.
Viewing the Operating Instructions of
rekordbox
1 Launch a web browser on the computer and access
the rekordbox product site below.
http://rekordbox.com/
2 Click [Support].
3 Click [Manual].
4 Click the required language of the manual.
!For inquiries on rekordbox, see the rekordbox product site indicated
above.
About rekordbox
!rekordbox is a composite software that enables track management
and DJ performances.
!The DJ performance function of rekordbox is called rekordbox dj.
Enter the license key shown on the rekordbox dj license key card
included with this product to use rekordbox dj.
Minimum operating environment
Supported
operating systems CPU and required memory
Mac: macOS
Sierra 10.12, OS X
10.11/10.10/10.9 (latest
update)
Intel®processor Core™i3/i5/i7, Intel®processor
Core™2 Duo
4 GB or more of RAM
Windows: 32-bit ver-
sion or 64-bit version of
Windows 10/Windows
8.1/Windows 7 (latest
service pack)
Intel®processor Core™i3/i5/i7, Intel®processor
Core™2 Duo
4 GB or more of RAM
Others
USB port A USB 2.0 port is required to connect the computer
with this unit.
Display resolution Resolution of 1 280 x 768 or greater
Internet connection An Internet connection is required for registering the
rekordbox user account and downloading the software.
!For information on the latest system requirements, compatibility, and supported
operating systems of rekordbox, see [System Requirements] on the rekordbox
product site below.
http://rekordbox.com/
!Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
!Depending on the computer’s power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using rekordbox.
!Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
!Use the latest version/service pack of the operating system.
Install rekordbox
Before installing rekordbox
If this is your first time to use rekordbox or if you are using rekordbox 3 or
earlier, follow this procedure to install the software.
If you have already installed rekordbox 4, update it to the latest version.
The rekordbox software is not included.
Access the rekordbox product site and download the software.
http://rekordbox.com/
!The user is responsible for preparing the computer, network
devices, and other elements of the Internet usage environment
required for a connection to the Internet.
!If you are already using rekordbox4, rekordbox dj can be used by
updating the software to the latest version.
Obtaining the rekordbox software
1 Access the rekordbox product site.
https://rekordbox.com/en/store/
!The page content is subject to change without notice.
2 Check the Get Started guide and then click [Free To
Download].
3 Carefully read the terms of the software license
agreement and select the [Agree] check box if you agree.
When you select the check box, [Download] becomes clickable.
4 Click [Download].
Downloading of rekordbox starts.
Installing the rekordbox software
The installation procedure depends on the operating system (OS) on the
computer you are using.
Do not connect this unit and the computer until installation is
completed.
!If any other programs are running on the computer, quit them.
0Installation Procedure (Mac)
1 Unzip the downloaded rekordbox software file.
2 Double-click the unzipped software file to launch the
installer.
En
20