SICAT JMT+ User manual
SICAT JMT
⁺
- PREPARATION OF THE T-ATTACHMENT
QUICK GUIDE | English
PREPARATION OF THE T-ATTACHMENT
QUICK GUIDE
In order to connect the lower jaw sensor for recording patient-specific jaw movements, the T-attachment must
be fixed to the vestibular surface of the patient's lower teeth:
1 2
■Adjust the T-attachment to the patient's mandibular arch. ■Check the shape of the T-attachment in the patient's mouth.
3 4
■Place the SICAT Fusion Bite in the patient's mouth to determine the
height for the connection of the T-attachment. There must be no inter-
ferences between SICAT Fusion Bite and T-attachment.
■Dry the vestibular tooth surface of the lower teeth.
■Apply flowable composite to the T-attachment.
5 6
■Connect the T-attachment to the vestibular surfaces of the lower teeth. ■Remove the SICAT Fusion Bite from the patient's mouth.
■Check that the T-attachment is securely fixed.
DH71QUG005
REVISION: 2019-04-16
PAGE: 2 / 2
MANUFACTURER
SICAT GMBH & CO. KG
BRUNNENALLEE 6
53177 BONN, GERMANY
WWW.SICAT.COM
SUPPORT
TELEPHONE: +49 228 85469712
FAX: +49 228 85469799
E-MAIL: [email protected]
Other manuals for JMT+
3
Other SICAT Dental Equipment manuals
