SICAT JMT+ User manual

SICAT JMT
⁺
- PREPARATION OF THE T-ATTACHMENT
QUICK GUIDE | English

PREPARATION OF THE T-ATTACHMENT
QUICK GUIDE
In order to connect the lower jaw sensor for recording patient-specific jaw movements, the T-attach-
ment must be fixed to the vestibular surface of the patient's lower teeth:
1 2
■Adjust the T-attachment to the patient's
mandibular arch.
■Check the shape of the T-attachment in the
patient's mouth.
3 4
■Place the SICAT Fusion Bite in the patient's
mouth to determine the height for the con-
nection of the T-attachment. There must be
no interferences between SICAT Fusion
Bite and T-attachment.
■Dry the vestibular tooth surface of the lower
teeth.
■Apply flowable composite to the T-attach-
ment.
5 6
■Connect the T-attachment to the vestibular
surfaces of the lower teeth.
■Remove the SICAT Fusion Bite from the pa-
tient's mouth.
■Check that the T-attachment is securely fixed.
DH71QUG005
REVISION: 2021-02-16
PAGE: 2 / 2
MANUFACTURER
SICAT GMBH & CO. KG
FRIESDORFER STR. 131-135
53175 BONN, GERMANY
WWW.SICAT.COM
SUPPORT
TELEPHONE: [phone]
FAX: [phone]
E-MAIL: [email protected]