Siemens Gigaset E450 User manual

s
Gigaset E450
cyan magenta yellow black Liebreich Medienproduktion
BA Cover E450.qxd 26.10.2005 12:00 Uhr Seite 1
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications reserved.
www.gigaset.com

1
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / overview.fm / 10.11.2008
Handset at a glance 1Display in idle status
2Battery pack charge status
=eVU(flat to full)
= flashes: battery pack almost flat
e V Uflashes: battery pack charging
3Display keys (page 13)
4Message key
Access to calls and message lists;
Flashes: new message or new call.
5End call key, On/Off key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold), activate/deactivate handset
(press and hold in idle status)
6Hash key
Key lock on/off (press and hold in idle sta-
tus),
Toggle between upper/lower case and digits
7Call-by-call list key
Open call-by-call list
8Connection socket for headset
9Microphone
10 Recall key
- Confer (Flash)
- Insert a dialling pause (press and hold)
11 Star key
Ringtones on/off (press and hold),
Open table of special characters
12 Key 1
Select network mailbox (press and hold)
13 Talk key
Answer a call, open last number redial list
(press briefly), start dialling (press and hold)
14 Handsfree key
Switch between earpiece and handsfree
mode;
Lights up: handsfree activated;
Flashes: incoming call
15 Control key (page 13)
16 Signal strength
Ð i Ñ Ò (high to low)
| flashes: no reception
16 2
3
5
4
6
7
15
14
12
10
11
9
8
1
13
ÐV
INT 1
10.05.05 09:45
INT SMS
B
ase station at a glance
Registration/Paging key
(page 31/page 31)

2
Contents
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / E450IVZ.fm / 10.11.2008
Contents
Safety precautions . . . . . . . . . . . . 4
Gigaset E450 –
more than just a telephone . . . . . 5
First Steps . . . . . . . . . . . . . . . . . . . 5
Pack contents . . . . . . . . . . . . . . . . . . . . 5
Installing the base station
and charging cradle . . . . . . . . . . . . . . . 5
Setting up the handset for use . . . . . . . 6
Menu tree . . . . . . . . . . . . . . . . . . . 9
Making calls . . . . . . . . . . . . . . . . 11
Making an external call . . . . . . . . . . . 11
Ending a call . . . . . . . . . . . . . . . . . . . . 11
Answering a call . . . . . . . . . . . . . . . . . 11
Calling Line Identification . . . . . . . . . 11
Handsfree operation . . . . . . . . . . . . . 12
Muting . . . . . . . . . . . . . . . . . . . . . . . . 12
Operating the handset . . . . . . . . 13
Control key . . . . . . . . . . . . . . . . . . . . . 13
Display keys . . . . . . . . . . . . . . . . . . . . 13
Returning to idle status . . . . . . . . . . . 14
Menu guidance . . . . . . . . . . . . . . . . . 14
Correcting incorrect entries . . . . . . . . 14
Network services . . . . . . . . . . . . 15
Setting functions for all
subsequent calls . . . . . . . . . . . . . . . . . 15
Functions during a call . . . . . . . . . . . . 15
Using the directory and lists . . . 16
Directory/call-by-call list . . . . . . . . . . . 16
Last number redial list . . . . . . . . . . . . 18
Opening lists with the message key . 19
Making cost-effective calls . . . . 20
Linking call-by-call numbers
with one number . . . . . . . . . . . . . . . . 20
Automatic network provider
code (preselection) . . . . . . . . . . . . . . 20
SMS (text messages) . . . . . . . . . 22
Writing/sending a SMS . . . . . . . . . . . . 22
Receiving a SMS . . . . . . . . . . . . . . . . . 24
Notification by SMS . . . . . . . . . . . . . . 26
SMS mailboxes . . . . . . . . . . . . . . . . . . 26
Setting SMS centre . . . . . . . . . . . . . . . 27
SMS info services . . . . . . . . . . . . . . . . 28
SMS to a PABX . . . . . . . . . . . . . . . . . . . 28
Activating/deactivating the
SMS function . . . . . . . . . . . . . . . . . . . . 29
SMS troubleshooting . . . . . . . . . . . . . 29
Using the network mailbox . . . . 30
Configuring the network mailbox
for fast access . . . . . . . . . . . . . . . . . . . 30
Viewing the network mailbox
message . . . . . . . . . . . . . . . . . . . . . . . 30
Using several handsets . . . . . . . 31
Registering handsets . . . . . . . . . . . . . . 31
De-registering handsets . . . . . . . . . . . 31
Locating a handset ("paging") . . . . . . 31
Changing the base station . . . . . . . . . 32
Making internal calls . . . . . . . . . . . . . . 32
Linking internal callers to
an external call . . . . . . . . . . . . . . . . . . 33
Changing the name of a handset . . . . 33
Changing a handset's internal
number . . . . . . . . . . . . . . . . . . . . . . . . 33
Using a handset as a room monitor . . 34
Handset settings . . . . . . . . . . . . . 35
Changing the display language . . . . . 35
Setting the display . . . . . . . . . . . . . . . 35
Setting the screen picture . . . . . . . . . . 35
Setting display illumination . . . . . . . . 36
Activating/deactivating auto answer . 36
Adjusting the loudspeaker volume . . . 36
Changing ringtones . . . . . . . . . . . . . . 37
Activating/deactivating first
ring muting . . . . . . . . . . . . . . . . . . . . . 37
Activating/deactivating
advisory tones . . . . . . . . . . . . . . . . . . . 38
Setting the alarm clock . . . . . . . . . . . . 38
Restoring the handset
default settings . . . . . . . . . . . . . . . . . . 39
Base station settings . . . . . . . . . 39
Protecting against unauthorised
access . . . . . . . . . . . . . . . . . . . . . . . . . 39
Activating/deactivating the
wait melody . . . . . . . . . . . . . . . . . . . . 39

3
Contents
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / E450IVZ.fm / 10.11.2008
Repeater support . . . . . . . . . . . . . . . . 39
Restoring default settings to
base station . . . . . . . . . . . . . . . . . . . . 39
Connecting the base station
to the PABX . . . . . . . . . . . . . . . . . 40
Flash time . . . . . . . . . . . . . . . . . . . . . . 40
Setting pauses . . . . . . . . . . . . . . . . . . 40
Appendix . . . . . . . . . . . . . . . . . . . 41
Care . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Contact with liquid . . . . . . . . . . . . . . 41
Questions and answers . . . . . . . . . . . 41
Customer service & product warranty –
Australia and New Zealand . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . 44
Specifications . . . . . . . . . . . . . . . . . . . 44
Notes on the
operating instructions . . . . . . . . 45
Symbols used . . . . . . . . . . . . . . . . . . . 45
Example: menu input . . . . . . . . . . . . . 45
Example: multiple line input . . . . . . . 46
Writing and editing a text message . . 46
Index . . . . . . . . . . . . . . . . . . . . . . 48

4
Safety precautions
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / security.fm / 10.11.2008
Safety precautions
Caution:
Read the safety precautions and the user guide before use.
Explain their contents to your children, and the potential hazards associated with using the tele-
phone.
Only use the mains adapter supplied, as indicated on the back of the base sta-
tion or charging cradle.
Fit only the approved rechargeable battery pack! Never use a conventional
(non-rechargeable) battery pack as this could damage your health and cause
injury. Use the battery pack as directed in this user guide (page 44).
The operation of medical appliances may be affected. Be aware of the technical
conditions in your particular environment, e.g. doctor's surgery.
The handset may cause an unpleasant humming noise in hearing aids.
Do not install the base or charging cradle in bathrooms or shower rooms. Base
and charging cradle are not splash proof (page 41).
Do not use the phone in environments with a potential explosion hazard,
e.g. auto paint shops.
If you give your Gigaset to someone else, make sure you also give them the user
guide.
Dispose of unusable batteries and telephones in accordance with statutory
requirements.
$
ƒ
Note:
Not all of the functions described in this user guide are available in all countries.
Caution:
uIMPORTANT NOTICE: Under power failure conditions, this telephone will not operate.
Please ensure that a separate telephone, not dependent on local power, is available for
emergency use.
uWARNING: This equipment may not provide for the effective handover of a call to
another device connected to the same line.

5
Gigaset E450 – more than just a telephone
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / starting.fm / 10.11.2008
Gigaset E450 –
more than just a telephone
Your phone not only enables you to send
and receive text messages over the fixed
network and store up to 150 telephone
numbers (page 16) – it can do a whole lot
more:
uYou can designate important people as
VIPs so you can tell important calls from
the ringtone (page 17).
uYou can store anniversaries (page 18)
in your phone and it will remind you of
them in advance.
uSelect frequently used phone numbers
at the press of a single key (page 16).
uView missed calls on your phone
(page 19).
Have fun using your new telephone!
First Steps
Pack contents
uone Gigaset E450 base station,
uone Gigaset E45 handset,
uone charging cradle,
u2 mains adapters,
uone phone cord,
uone battery pack,
uone battery cover,
uone bayonet lock ring,
uone belt clip,
uone headset socket cover,
uone user guide.
Installing the base station
and charging cradle
The base station and charging cradle are
designed for use in closed, dry rooms with
a temperature range of +5 °C to +45 °C.
Set up the base station at a central point in
the apartment or house.
Connecting the charging cradle is
described at the end of this user guide.
Please note:
uNever expose the telephone to heat
sources, direct sunlight, other electrical
appliances.
uProtect your Gigaset from moisture,
dust, corrosive liquids and vapours.
Range and reception strength
Range:
uUp to 300 m in the open
uUp to 50 m in buildings
Reception strength:
The display shows the quality of the radio
contact between the base station and
handset:
uGood to poor: ÐiÑÒ
uNo reception: |flashes

6
First Steps
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / starting.fm / 10.11.2008
Connecting the base station
¤First connect the mains adapter and
then the phone jack as shown below
and place the cables in the cable
recesses.
1 Back of the base station (detailed view)
2 Mains adapter 240 V
3 Phone jack with phone cord
Please note:
uThe mains adapter must be always
connected, as the phone will not oper-
ate without mains connection.
uIf you buy a replacement phone cord
from a store, ensure that the phone
jack is connected correctly.
Setting up the handset for use
Fitting the battery pack
¤Insert the plug into the socket as shown
in the enlarged view.
¤Insert the battery pack.
¤Place the cords in the cord routing.
Correct phone jack assignment
1unused
2unused
3a
4b
5unused
6unused
1
3
2
1
1
1
3
2
1
4
5
6
Caution:
Use only the rechargeable battery pack recom-
mended by Gigaset Communications GmbH *
(page 44). Never use a conventional (non-
rechargeable) battery pack, as this may cause
significant damage to health and property. For
example, the outer casing of the battery pack
could be destroyed or the battery pack could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a trademark
licensee of Siemens AG.

7
First Steps
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / starting.fm / 10.11.2008
Closing the battery cover
¤Hold the battery cover at a slight angle
and introduce the two lower lugs into
the casing first. Then close the cover so
that it clicks into place.
Locking the battery cover
Insert the catches on the lock ring or belt
clip into the notches in the casing and
make sure that the arrow markings on the
casing are facing those on the bottom of
the ring. Turn the lock ring or belt clip
clockwise to the end stop. When both
holes are horizontally aligned with the
upper edge of the handset the lock ring is
closed.
Opening the battery cover
Position both thumbs on the lock ring and
at the same time turn the lock ring or belt
clip anticlockwise and remove.
¤Insert a coin into the cavity at the top of
the battery cover and twist it until the
cover opens.
Placing the handset in the charging
cradle
¤Plug the charging cradle mains adapter
into a mains power socket.
¤Place the handset in the charger with
the display facing forward.
The handset is already registered with the
base station at the factory. INT1appears in
the display. You do not have to re-register.
If, nonetheless, you have to register your
handset with the base station, please see
page 31.
Leave the handset in the charging cradle
to charge the battery pack.
For questions and problems see page 41.
Notes:
– If the handset has switched itself off
because the battery pack is flat and is then
placed in the charging cradle, it will switch
itself on automatically.
– The handset must only be placed in the
designated charging cradle.

8
First Steps
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / starting.fm / 10.11.2008
Headset socket
You can connect most types of headsets
that have a 2.5mm jack connector.
If you do not connect a headset, please
insert the cover supplied for the headset
socket to guarantee the unit is still splash
proof.
Initial charging and discharging of the
battery pack
If the handset is activated, the flashing
battery icon ein the top right of the dis-
play indicates that the battery pack is
being charged.
During handset operation, the battery
icon indicates the charge status of the bat-
tery pack (page 1). The correct charge sta-
tus can only be displayed if the battery
pack is first fully charged and discharged.
¤To do this, leave the handset in the
charging cradle continuously for ten
hours. Your handset need not be
switched on for it to charge.
¤Afterwards, remove the handset from
the charging cradle and do not put it
back again until the battery pack is fully
discharged.
Please remember:
uAlways repeat the charging and dis-
charging procedure if you remove the
battery pack from the handset and
insert it again.
uThe battery pack may warm up as it is
charging. This is not dangerous.
uAfter a time the charge capacity of the
battery pack will decrease for technical
reasons.
¤Set the date and the time, for example
to ensure the correct time of incoming
calls is recorded.
Setting the date and time
¤If you have not yet set the date and
time, press the display key §Time§ to open
the input field.
To change the time, open the input field
via:
v¢Ð¢Date/Time
¤Change multiple line input:
Date:
Enter day, month and year in 6-digit
format.
Time:
Enter hours and minutes with 4 digits,
e.g. QM15for 07:15
a.m.
§Save§ Press the display key.
Once the phone is registered and the time
set, the idle display looks as shown here
(example):
Your phone is now ready for use.
Note:
After the initial charge and discharge you may
replace your handset in the charging cradle
after every call.
ÐV
INT 1
10.05.05 07:15
INT SMS

9
Menu tree
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / menuetree.fm / 10.11.2008
Menu tree
Instead of scrolling to locate a menu function, you can select a menu function faster by
opening the menu and keying in the digit combination ("shortcut").
Example: v 5 2 11 for "Set ringtone for external calls".
With the telephone in idle status, press v(open main menu):
1SMS î
You have activated a SMS mailbox (general or private) without a PIN
1-1 New SMS (page 22)
1-2 Incoming 0 (page 24)
1-3 Outgoing 0 (page 23)
You have activated a SMS mailbox with a PIN or 2-3 mailboxes
1-1 Mailbox 1-1-1 New SMS (page 22)
1-1-2 Incoming 0 (page 24)
1-1-3 Outgoing 0 (page 23)
1-2
to
1-4
Mailbox 1
Mailbox 2
Mailbox 3
1-2-1
to
1-4-1
New SMS (page 22)
1-2-2
to
1-4-2
Incoming 0 (page 24)
1-2-3
to
1-4-3
Outgoing 0 (page 23)
1-5 SMS Service (page 28)
1-6 Settings 1-6-1 Service Centres (page 27)
1-6-2 SMS Mailboxes (page 26)
1-6-3 Notify Number (page 26)
1-6-4 Notify Type (page 26)
1-6-5 Status Report (page 23)
1-6-6 Subscribe to SMS (page 22)
2Sel. Services ê
2-6 All Calls 2-6-1 Call Divert (page 15)
2-6-3 Call Waiting (page 15)
3Alarm Clock ì
4Add. Features í
4-3 Room Monitor (page 34)

10
Menu tree
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / menuetree.fm / 10.11.2008
5Settings Ð
5-1 Date/Time
5-2 Audio Settings 5-2-1 Ringer Settings (page 37)
5-2-2 Advisory Tones (page 38)
5-3 Display 5-3-1 Screen Picture (page 35)
5-3-2 Colour Scheme (page 35)
5-3-3 Contrast (page 35)
5-3-4 Backlight (page 36)
5-4 Handset 5-4-1 Language (page 35)
5-4-2 Auto Answer (page 36)
5-4-3 Register H/Set (page 31)
5-4-4 Select Base (page 32)
5-4-5 Reset Handset (page 39)
5-5 Base 5-5-2 Music on hold (page 39)
5-5-3 System PIN (page 39)
5-5-4 Base Reset (page 39)
5-5-5 Add. Features (page 33, page 39, page 40)
5-5-6 Preselection (page 21)
5-5-7 Calls List Type (page 19)
5-6 Voice Mail 5-6-1 Set Key 1 (page 30)

11
Making calls
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / telefony.fm / 10.11.2008
Making calls
Making an external call
External calls are calls using the public tel-
ephone network.
~c Enter the number and press
the talk key.
Or:
c~ Press and hold the talk key
cand then enter the
number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
Ending a call
aPress the end call key.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree
key d.
You can accept the call by:
¤Pressing the talk key c.
¤Pressing the handsfree key d.
If the handset is in the charging cradle and
the Auto Answer function is activated
(page 36), the handset will take a call
automatically when you lift it off the
charging cradle.
If the ringtone is intrusive, press the dis-
play key §Silence§. You can take the call as
long as it is displayed on the screen.
Calling Line Identification
When you receive a call, the caller's
number and/or name is displayed on the
screen if the following conditions are met:
uYour network provider supports CLIP,
CLI and CNIP.
– CLI (Calling Line Identification):
number of the caller is transmitted.
– CLIP (Calling Line Identification Pres-
entation): number of the caller is
indicated.
– CNIP (Calling Name Identification
Presentation): name of the caller is
indicated.
uYou have arranged CLIP or CNIP with
your network provider.
uThe caller has arranged CLI with the
network provider.
Call display with CLIP/CLI
If the number of the caller is stored in your
directory, you will see their name.
1Ringsymbol
2 Number or name of caller
The following is displayed in place of the
number:
uExternal, if no number is transmitted.
uWithheld, if the caller has withheld
Calling Line Identification.
uUnavailable, if the caller has not
arranged Calling Line Identification.
Notes:
– Dialling using the directory, call-by-call list
(page 1, page 16) or calls list (page 19)
saves time re-entering numbers and net-
work provider prefixes ("call-by-call num-
bers").
1
2
Å
1234567890
Accept Silence

12
Making calls
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / telefony.fm / 10.11.2008
Screen display with CNIP
If you have CNIP, then the name (town)
that is registered with your network pro-
vider for the calling number will also be
displayed. If the number of the caller is
stored in your directory, the CNIP display is
replaced by the corresponding directory
entry.
1 Caller's number
2Nameandtown
The display shows:
uExternal, if no number is transmitted.
uWithheld, if the caller has withheld
Calling Line Identification.
uUnavailable, if the caller has not
arranged Calling Line Identification.
Handsfree operation
In handsfree mode, instead of holding the
handset to your ear you can put it down
e.g. on the table in front of you to allow
others to participate in the call.
Activating/deactivating handsfree
Activating while dialling
~d Enter the number and press
the handsfree key.
¤You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
dPress the handsfree key.
During a call switch handsfree on or off.
If you wish to place the handset in the
charging cradle during a call:
¤Press and hold the handsfree key d
while placing the handset in the base
station. If handsfree key ddoes not
light up, press the key again.
For how to adjust the volume, see
page 36.
Muting
You can deactivate the microphone in
your handset during an external call.
The other party hears a wait melody.
uPress the control key on the
left to mute the handset.
”Press the display key to reacti-
vate the microphone.
You can switch the wait melody on and off
(page 39).
1234567890
Anna Fielding,
London 2
1

13
Operating the handset
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / telefony.fm / 10.11.2008
Operating the handset
Activating/deactivating the handset
aPress and hold the end call
key. You will hear the confir-
mation beep.
Activating/deactivating the keypad
lock
#Press and hold the hash key.
You will hear the confirmation beep. The
icon Øappears in the display when the
keypad lock is activated.
The keypad lock is deactivated automati-
cally if someone calls you. It is re-activated
when the call is finished.
Control key
In the description below, the side of the
control key (up, down, right, left) which
you have to press in the different operat-
ing situations is marked in black, e.g. v
for "press right on the control key".
The control key has a number of different
functions:
When the handset is in idle status
sOpen the directory.
vOpen main menu.
uOpen list of handsets.
tSet the ringtones on the hand-
set (page 37).
In the main menu and in input fields
You can use the control key to move the
cursor up t, down s, right vor
left u.
In lists and submenus
t/ sScroll up/down line by line.
vOpen submenu or confirm
selection.
uGo back one menu level, or
cancel.
During an external call
sOpen the directory.
uInitiate an internal consulta-
tion call.
tAdjust loudspeaker volume for
earpiece and handsfree mode.
Display keys
The function of the display keys changes
depending on the particular operating sit-
uation. Example:
1 The display keys' current functions are
shown in the bottom display line.
2 Display keys
The most important display symbols are:
§§§§§Menu§§§§ Open the main menu.
§Options§ Open a context-dependent
menu.
WDelete key: deletes one char-
acter at a time from right to
left.
ÎGo back one menu level or
cancel operation.
ÓCopy number into directory.
•Open the last number redial
list.
2
1
INT SMS

14
Operating the handset
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / telefony.fm / 10.11.2008
Returning to idle status
You can revert to idle status from any-
where in the menu as follows:
¤Press and hold the end call key a.
Or:
¤Do not press any key: after 10 seconds
the display will automatically revert to
idle status.
Changes that you have not confirmed or
saved by pressing §OK§, §Yes§, §Save§, §Send§ or
Save Entry §OK§ will be lost.
An example of the display in idle status is
shown on page 1.
Menu guidance
Your telephone's functions are accessed
using a menu that has a number of levels.
Main menu (first menu level)
¤Press vwith the handset in idle status
to open the main menu.
The main menu functions are shown in
the display as a list with icon and name.
To access a function, i.e. open the corre-
sponding submenu (next menu level):
¤Navigate to the function using the con-
trol key q. Press the display key §OK§.
Submenus
The functions in the submenus are dis-
played as lists.
To access a function:
¤Scroll to the function with the control
key qand press §OK§.
Or:
¤Enter the corresponding digit combina-
tion (page 9).
Pressing briefly on the end call key a
returns you to the previous menu level /
cancels the operation.
Correcting incorrect entries
You can correct incorrect characters in the
text by navigating to the incorrect entry
using the control key. You can then:
upress Xto delete the character to the
left of the cursor,
uinsert characters to the left of the cur-
sor,
uoverwrite the character (flashing)
when entering the time and date etc.
You will find examples of symbols used,
menu entries and multiple line input in the
appendix to this user guide, page 45.

15
Network services
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / TNet_Features_SAG.fm / 17.08.2007
Network services
Network services are functions that your
network provider makes available to you.
You have to request these services from
your network provider.
¤If you require assistance, please con-
tact your network provider.
Setting functions for all
subsequent calls
If you have completed one of the follow-
ing procedures, a code is sent.
¤After confirmation from the telephone
network, press the end call key a.
You can set the following features:
General call diversion
v¢ê¢All Calls ¢Call Divert
¤Change multiple line input:
When:
AllCalls / NoAnswer / When Busy dialling.
Call No.:
Press the display key §Edit§. Enter number
to which call is to be diverted, and press
Save Entry §OK§.
Status:
Activating/deactivating call diversion.
¤Press the display key §Send§.
Activating/deactivating call waiting
v¢ê¢All Calls ¢Call Waiting
Status: Activating/deactivating.
§Send§ Press the display key.
Functions during a call
Consultation
During a call:
§Ext.Call§ Press the display key.
~Enter number.
You have the following options:
uToggling:
¤Use qto toggle between the par-
ticipants.
End the call with one participant:
¤Use qto switch to the caller. Then:
§Options§ End Active Call.
uConference call:
¤Press the display key §Conf.§.
End the conference call (toggle):
¤Press §EndConf§.
uEnd call with both participants:
¤Press the end call key a.
Accepting a waiting call
§Accept§ Press the display key.
You have the option of toggling or holding
a conference call.
Accept call waiting
§Options§ £Accept waiting call
Reject call waiting
§Options§ ¢Reject waiting call
Favour call waiting
§Options§ ¢Favour waiting call
Note:
Without CLIP a waiting call is only announced
with a beep.

16
Using the directory and lists
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / direct_charges.fm / 10.11.2008
Using the directory and lists
The options are:
uDirectory,
uCall-by-Call list,
uLast number redial list,
uSMS list,
uCalls list,
You can store a maximum of 150 entries in
the directory and call-by-call list (the
actual number depends on the size of the
individual entries).
You create the directory and call-by-call
list for your own individual handset. You
can also send lists/entries to other hand-
sets (page 17).
Directory/call-by-call list
In the directory, you can store numbers
and the associated names.
¤With the handset in idle status, open
the directory by pressing the skey.
In the call-by-call list , you can store pre-
fixes of network providers (so-called "call-
by-call numbers").
¤Open the call-by-call list in idle status
by pressing the Ckey.
Length of entries
Number: max. 32 digits
Name: max. 16 characters
Storing a number in the directory
s¢New Entry
¤Change multiple line input:
Number :
Enter number.
Name :
Enter name.
Annivers.:
Enter anniversary if required (page 18).
Speed Dial:
Select key for quick dial.
¤Save changes.
Storing a number in the call-by-call list
C¢New Entry
¤Change multiple line input:
Number :
Enter number.
Name :
Enter name.
Selecting entries in the directory and
call-by-call list
s/ COpen directory or call-by-call
list.
You have the following options:
uUse sto scroll through the entries
until the required name is selected.
uEnter the first character of the name, or
scroll to the entry with sif required.
Dialling with the directory/
call-by-call list
s/ C ¢s(select entry)
cPress the talk key. The number
is dialled.
Managing entries in the directory/
call-by-call lists
s/ C ¢s(select entry)
Viewing an entry
§View§ Press the display key.
The entry is displayed.
Back with §OK§.
Editing entries
§View§ §Edit§ Press display keys one after the
other.
¤Carry out changes and save.
Note:
For quick access to a number from the direc-
tory or the call-by-call list (quick dial), you can
assign the number to a key.

17
Using the directory and lists
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / direct_charges.fm / 10.11.2008
Using other functions
s/ C¢s(select entry)
¢§Options§ (open menu)
The following functions can be selected
with q:
Display Number
Edit or add to a stored number. Then
dial or call up further functions by
pressing Options.
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
VIP Entry (directory only)
Mark a directory entry as VIP
(Very Important Person) and assign it
a particular ringtone. You can then
identify VIP calls by their ringtones.
Requirement: Calling Line Identifica-
tion (page 11).
Copy Entry
Send a single entry to a handset
(page 17).
Delete List
Delete all entries in the directory/call-
by-call list.
Copy List
Send complete list to a handset
(page 17).
Available Memory
Display the available entries in the
directory and call-by-call list (page 16).
Using quick dial keys
¤Press and hold the required quick dial
key (page 16).
Sending the directory/call-by-call list
to another handset
Requirements:
uThe sending and receiving handsets
must both be registered to the same
base station.
uThe other handset and base station can
send and receive directory entries.
s/ C ¢s(select entry)
¢§Options§ (open menu)
¢Copy Entry / Copy List
~Enter the internal number of
the receiver handset. You see
Copying entry.
§Yes§ / §No§ Press the display key.
A successful transfer is confirmed by a
message and confirmation tone on the
receiver handset.
Please remember:
uEntries with identical numbers are not
overwritten on the receiver handset.
uThe transfer is cancelled if the phone
rings or if the memory of the receiver
handset is full.
Adding a displayed number to the
directory
Numbers that appear in a list, e.g. the calls
list or the last number redial list, in a text
message or displayed during a call can be
added to the directory.
If you have CNIP, the first 16 characters of
the transmitted name are copied to the
Name line.
A number is displayed:
§Options§ ¢Copy to Directory
¤Complete the entry, see page 16.
Copying a number from the directory
There are many operating situations in
which you can open the directory, e.g. to
copy a number. Your handset need not be
in idle status.
¤Depending on the operating situation,
open the directory with sor Ò
or §Menu§ Directory .
qSelect an entry (page 16).

18
Using the directory and lists
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / direct_charges.fm / 10.11.2008
Storing anniversaries in the directory
You can store an anniversary for every
number in the directory and specify a time
when you will receive a reminder call on
the anniversary.
s ¢s(Select entry; page 16)
§View§ §Edit§ Press display keys one after the
other.
sScroll to the Annivers.: line.
§Edit§ Press the display key.
¤Change multiple line input:
Date:
Enter the day/month in 4-digit format.
Time:
Enter the hour/minute for the reminder
call in 4-digit format.
Prompt:
Select the type of signal for the
reminder and press §OK§.
¤Save changes (page 46).
Deleting anniversaries
s ¢s(Select entry; page 16)
§View§ §Edit§ Press display keys one after the
other.
sScroll to the Annivers.: line.
§Edit§ §Delete§ §Save§
Press display keys one after the
other.
Reminder call on an anniversary
A reminder call is signalled on the handset
using the selected ring tone.
§Silence§ Press the display key to stop
the reminder call.
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
cPress the key briefly.
sSelect entry.
cPress the talk key again. The
number is dialled.
When displaying a name, you can have the
respective phone number displayed by
using the display key §View§.
Managing entries in the last number
redial list
cPress the key briefly.
sSelect entry.
§Options§ Open menu.
The following functions can be selected
with q:
Display Number (as in the directory,
page 17)
Copy to Directory
Copy an entry to the directory
(page 17).
Delete Entry (as in the directory, page 17)
Delete List (as in the directory, page 17)
Note:
Reminder calls require a time stamp. If you
select a visual signal, then a time stamp is not
required and is automatically set to 00.00.

19
Using the directory and lists
Gigaset E450 / AUS / A31008-M1702-C401-1-7619 / direct_charges.fm / 10.11.2008
Opening lists with the
message key
You can use the message key fto
open the following lists:
uSMS list
If several mailboxes are set up
(page 26), several lists are displayed.
uNetwork mailbox
If your network provider supports this
function and the network mailbox is
configured for fast access (page 30).
uCalls list
An advisory tone sounds as soon as a new
entry appears on a list. The fkey
flashes (it goes off when the key is
pressed). In idle status, the displays shows
an icon for the new message.
The number of new entries is shown
beneath the corresponding icon.
Only the lists that contain messages are
shown (exception: network mailbox). Lists
with new messages are shown first and
identified in bold. The number of new or
old messages contained are each shown
in brackets.
Select the list with q. To open, press §OK§.
SMS incoming message list
All received SMS messages are saved in
the incoming message list, see page 24.
Calls list
Requirement: Calling Line Identification
(CLIP, page 11)
Depending on the type of list set, the calls
list contains
uaccepted calls ( )
umissed calls
ucalls recorded by the answering
machine of your network mailbox (Ã)
The numbers of the last 30 incoming calls
are stored.
Multiple missed calls from the same
number are only stored once (the last
call).
Setting list type for calls list
v¢Ð¢Base ¢Calls List Type
Missed Calls / All Calls
Select and press §OK§ (=on).
aPress and hold (idle status).
The entries in the calls list are retained
when you change the list type.
List entry
New messages are at the top.
Example of list entries:
uList type (in header)
uStatus of entry
Bold: new entry
uNumber or name of caller
You can add the number of the caller to
the directory (page 17).
uDate and time of call (if set, page 8)
Icon New message...
Ã... in network mailbox
Á... in calls list
À... in SMS list
‰
‰
All Calls
Susi Sorglos
29/08/05 12:20 ‰
Louise Miller
29/08/05 11:15 Ã
**************************
Delete Options