
xET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
11 IM 308-C – starting ET 200 11-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1 Starting and operating the ET 200 11-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.2 Response of the ET 200 distributed I/O system 11-4. . . . . . . . . . . . . . . . . . .
11.2.1 Reaction when power supply is switched on 11-5. . . . . . . . . . . . . . . . . . . . . .
11.2.2 Reaction when IM 308-C is switched to OFF, ST or RN 11-7. . . . . . . . . . . .
11.2.3 Reaction when CPU is switched to STOP or RUN 11-9. . . . . . . . . . . . . . . . .
11.2.4 Reaction to interruption of bus communication or failure
of the DP slave 11-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.2.5 Reaction when bus interruption is rectified
or DP slave is again addressable 11-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.3 Switching off ET 200 and reaction to power failure 11-15. . . . . . . . . . . . . . . . .
12 S5-95U – starting ET 200 12-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.1 Starting and operating the ET 200 12-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2 Power-up of the S5-95U on the bus 12-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3 Response of the ET 200 distributed I/O system 12-5. . . . . . . . . . . . . . . . . . .
12.3.1 Reaction to switching the S5-95U for the first time from STOP to RUN
(programmable controller startup) 12-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3.2 Reaction after power failure in the S5-95U
(restoration of mains power) 12-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3.3 Reaction when, with the bus running,
you switch the S5-95U to STOP or RUN 12-8. . . . . . . . . . . . . . . . . . . . . . . . .
12.3.4 Reaction to interruption of bus communication or DP slave failure 12-9. . .
12.3.5 Reaction when bus interruption is rectified
or the DP slave is again addressable 12-10. . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.4 Switching off ET 200 12-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.5 Failure response of the S5-95U 12-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13 Upgrading to COM ET 200 Windows or to IM 308-C 13-1. . . . . . . . . . . . . . . . . . . . .
13.1 New features of COM ET 200 Windows and IM 308-C 13-2. . . . . . . . . . . . .
13.2 Compatibility between the various versions and releases 13-5. . . . . . . . . . .
13.2.1 Compatibility with IM 308-B and COM ET 200
(order number 6ES5 895-6SE.1 and 6ES5 895-6ME.1, respectively) 13-6.
13.2.2 Compatibility with COM ET 200 Windows V 1.0 and
IM 308-C (release 1) 13-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3 The upgrading procedure 13-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A General technical data A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.1 Electromagnetic compatibility A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.2 Transport and storage conditions A-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.3 Mechanical and climatic conditions for operation A-4. . . . . . . . . . . . . . . . . .
A.4 Insulation tests, protection class and degree of protection A-6. . . . . . . . . .
B Access commands for the S5-115U, S5-135U and S5-155U programmable
controllers B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B.1 Access commands for the CPUs 941 to 943 B-2. . . . . . . . . . . . . . . . . . . . . .
Table of Contents