Sig Sauer JULIET3 User manual

MAGNIFIER
JULIET®
OWNERS MANUAL
JULIET4™ shown

23
sigsauer.com
INTRODUCTION
The SIG SAUER®JULIET®Magnifier provides users the ability to engage longer range targets with more
accuracy. When mounted behind a Sig Sauer ROMEO Red Dot sight the quick flip away JULIET Magnifier
allows the user to quickly change from close to long distance targets with a fast single handed operation.
Lens covers protect your JULIET Magnifier from spent casings and other debris. Tested to MIL-SPEC
standards, your JULIET Magnifier is built to never let you down.
FEATURES
(Vary depending upon model)
• Quick Release for easy removal when not in use
• PowerCam 90° Mount
• Rear flip back lens cover for added protection
• 2X lens filters to protect the objective lens of your magnifier
• IPX8 20 Meters for 1 hour
TABLE OF CONTENTS
Please visit sigsauer.com for Owners Manual downloads.
Introduction..........................................................3
Features ............................................................3
Contents ............................................................4
Product Identification ..................................................4
Installation...........................................................6
Operation ...........................................................7
Specifications ........................................................8
Maintenance ........................................................10
SIG SAUER®Electro-Optics Infinite Guarantee™ / Lifetime Limited Warranty......12

45
sigsauer.com
PRODUCT IDENTIFICATION
A Elevation Adjustment
BWindage Adjustment
CDiopter Adjustment Ring
CONTENTS:
• JULIET®Magnifier
• JULIET Flip Away Mount
• 4 Screws (White Nylok patch) 1.41” Setting
• 1.53” Spacer Plate
• 4 Screws (Red Nylok patch) 1.53” Setting
• 1.63” Spacer Plate
• 4 Screws (Blue Nylok patch) 1.63” Setting
• 2.5 mm Hex Tool
• 2 Thread In Lens Covers
• Flip Back Lens Cover
C
A B
JULIET4™ shown

67
sigsauer.com
OPERATION
JULIET magnifiers are designed to operate behind red dot sights. When the magnifier is not in use flip it to
the side to return to 1x power.
ADJUSTMENTS
The JULIET should be adjusted to match your red dot sight. To do this, use the windage and elevation
adjustment dials on the top and right side of the magnifier. You will want to adjust the magnifier so that
the red dot is located in the center of the field of view. Adjusting the windage and elevation dials on your
JULIET does not make changes to the POI of your firearm. Those adjustments will need to be made on
your red dot sight.
The JULIET also has an adjustable diopter. To adjust the
diopter rotate the diopter adjustment ring until the aiming
feature is crisp and clear.
Before working on your JULIET®Magnifier always ensure that the firearm is unloaded with the safety on.
INSTALLATION
The JULIET comes with two separate mounting plates that allow the user to mount the magnifier behind
optics ranging from 1.41” to 1.63”. If you need to raise the height of the JULIET you will need to remove
your magnifier from the base and re-attach it with the correct riser plate and its corresponding length
screws.
Once you have selected the correct height, mount the JULIET magnifier behind your red dot sight. Make
sure that there is enough space between the two so that the magnifier can be rotated out of the way
without making contact.
Adjust the torque of the adjustment screw on the opposite of the quick release lever so that the
magnifier can be installed and removed without adjustment. If the adjustment screw is over tightened
you will not be able to operate the quick release lever.
WWARNING
Elevation
Diopter
Windage

89
sigsauer.com
MODEL JULIET3™ JULIET4™ JULIET6™
Magnification 3x 4x 6x
Field of View 8° 6.25° 4°
Objective Lens Clear Aperture 24 mm 24 mm 24 mm
Exit Pupil 8 mm 6 mm 4 mm
Eye Relief 65 mm 65 mm 65 mm
Diopter Range +/- 2 +/- 2 +/- 2
Adjustment Range +/- 55 MOA +/- 45 MOA +/- 30 MOA
Waterproofing 20m, 1 hour 20m, 1 hour 20m, 1 hour
Length (A) 4.23 in / 108 mm 4.23 in / 108 mm 5.32 in / 135 mm
Width (B) 1.92 in / 49 mm 1.92 in / 49 mm 1.92 in / 49 mm
Height (C) 2.80 in / 71 mm 2.80 in / 71 mm 2.80 in / 71 mm
AB
C
JULIET4™ shown
JULIET® SPECIFICATIONS

10 11
sigsauer.com
REPLACEMENT PARTS
For replacement parts for this model, please call 603-610-3000.
MAINTENANCE
Cleaning- keep your lenses clear by using a soft cloth or lens pen. The best way to maintain image
quality is by keeping your lenses clear of dirt and dust that cause scratches.
Always use your lens covers and flip back lens cover to ensure that the sight optics remain scratch free. Description Replacement P/N
THREAD IN LENS COVER 7400640-R
FLIP BACK LENS COVER 7400641-R
RED PATCH SCREW 7401276-R
WHITE PATCH SCREW 7401293-R
BLUE PATCH SCREW 7401294-R
FLIP AWAY MOUNT 7401956-01-R
SPACER PLATE KIT WITH 1.53 PLATE/1.63 PLATE AND MOUNTING SCREWS SOJSPK

12 13
sigsauer.com
WWWARNING: CANCER AND REPRODUCTIVE HARM – www.P65Warnings.ca.gov
I
N
F
I
N
I
T
E
G
U
A
R
A
N
T
E
E
S
I
G
S
A
U
E
R
SIG SAUER® Electro-Optics Infinite Guarantee® / Limited Lifetime Warranty
SIG SAUER has manufactured the most rugged, dependable, high-performance firearms
for more than two centuries. Our heritage of design, engineering, and precision-
manufactured quality predates the existence of any other optics company worldwide.
We understand the importance of quality in the line of fire, at the shooting range or
on your next hunt. SIG SAUER Electro-Optics had to earn the right to wear that badge and the Infinite
Guarantee has your back, forever. Period.
We will repair or replace your SIG SAUER product in the event it becomes damaged or defective, at no
charge to you. If we cannot repair your product, we will replace it with a product in perfect working order
of equal or better physical condition.
SIG SAUER Infinite Guarantee®
• Unlimited Lifetime Guarantee
• Fully Transferable
• No Warranty Card Required
• No Receipt Required
• No Time Limit Applies
• No Charge
Please note that our Infinite Guarantee excludes coverage for intentional damage, misuse, cosmetic
damage that does not affect the performance of the optic, loss, theft, or unauthorized repair or
modification. Excludes electronic and Tritium components.
Customers seeking warranty coverage must first obtain a Return Merchandise Authorization (RMA) by
contacting SIG SAUER Customer Service, and return the product unloaded and freight prepaid.
ANY WARRANTIES IMPLIED BY LAW, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. REPAIR, ALTERATION, OR
REPLACEMENT AS PROVIDED HEREIN IS YOUR EXCLUSIVE REMEDY FOR ANY DEFECTIVE PRODUCT. IN NO
EVENT SHALL SIG SAUER OR ANY COMPANY AFFILIATED WITH SIG SAUER BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF THE PURCHASE OR USE OF
THIS PRODUCT, WHETHER BASED UPON CONTRACT, TORT, STATUTE, OR OTHERWISE. Some states do
not allow the exclusion or limitation of implied warranties, or the exclusion or limitation of incidental or
consequential damages, so some or all of the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from State to
State.
THIS WARRANTY APPLIES TO COMMERCIAL CUSTOMERS ONLY, AND DOES NOT APPLY TO GOVERNMENT,
MILITARY, LAW ENFORCEMENT, OR NON-US CUSTOMERS. NON-US COMMERCIAL CUSTOMERS MUST
PURCHASE PRODUCT THROUGH AN AUTHORIZED SIG SAUER DEALER WITHIN THEIR COUNTRY OF
RESIDENCE FOR THIS WARRANTY TO APPLY.

14 15
sigsauer.com
NOTES: NOTES:

P/N 7402829-01 R01
FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000
27100 SW Parkway Avenue, Wilsonville, Oregon 97070 USA
sigsauer.com