Signature Hardware Ghani User manual

1Ghani Freestanding Tub Faucet Installation Instructions
GHANI FREESTANDING TUB FAUCET
INSTALLATION INSTRUCTIONS
Before you begin, read the installation instructions below. Observe all local plumbing and building codes.
Unpack and inspect faucet and parts for damage. If any damage is found, contact Customer Service at 1-866-855-2284
and return faucet to container. If you need assistance while installing your new faucet, call our Customer Service number.
Your application and circumstances may call for variations to the installation instructions. We recommend consulting a
professional if you are unfamiliar with installing bathroom xtures and plumbing. Signature Hardware accepts no liability
for any damage to the oor, walls, plumbing, or personal injury during installation.
Installation on a concrete slab is not recommended.
TOOLS AND MATERIALS:
Adjustable Wrench Tape Measure Plumber’s Tape
Level Straight Edge Silicone Sealant
Pencil Drill Loctite Thread Sealant
Damp Cloth Protective Clothing Safety Glasses
Part Qty
1. Faucet Body 1
2. Decorative Escutcheon 1
3. A Screw 2
4. A Gasket 2
5. Base 1
6. B Screw 6
7. B Gasket 10
8. C Screw 4
9. Installation Plate 2
10. Handshower 1
11. Shower Hose 1
12. Plastic Guard 1
13. Test Plate 1
14. Rubber Plug 2
15. 5.0 mm Allen Wrench 1
16. 6.0 mm Allen Wrench 1

2Ghani Freestanding Tub Faucet Installation Instructions
15. 5.0 mm Allen Wrench
8. C Screw
7. B Gasket
5. Base
9. Installation
Plate
5. Base
7. B Gasket
8. C Screw
9. Plate
Wood Blocking
35-50 mm
1-3/8"- 1-5/8"
Mounting Holes
Mounting Holes
1. Attach the Base (5) to the Plates (9) with the C
Screws (8) and BGaskets (7).
2. Use the Base (5) as a template to mark the location
of the mounting holes on wood blocking. Make sure
the wood is 1-3/8"-1-15/16" thick.

3Ghani Freestanding Tub Faucet Installation Instructions
Mounting Holes
Mounting Holes
6. Screw B
7. Gasket B
Wood
Blocking
Wood
Blocking
16. 6.0mm
Allen Wrench
4. Gasket A
3. Screw A
14. Rubber Plug
13. Test Plate
Floor
Hot Water
Cold Water
4. Connect the hot and cold water supplies. Attach the
Rubber Plugs (14), and Test Plate (13) to the Base
(5) with the AScrews (3) and AGaskets (4).
3. Drill mounting holes with the appropriate drill bit.
Attach the Base (5) to the wood blocking with the B
Screws (6), and BGaskets (7).

4Ghani Freestanding Tub Faucet Installation Instructions
12. Plastic Guard
12. Plastic Guard
4. Gasket A
3. Screw A
14. Rubber
Plug
13. Test Plate
Min 50 Min 1-15/16"
5. Put the Plastic Guard (12) onto the Base (5). Install
the nished oor. When the nished oor is
installed remove the Plastic Guard (12), Rubber
Plug (14), and Test Plate (13).
6. Attach the Faucet Body (1) to the base (5) with the
AScrews (3), and AGaskets (4). Make sure the
body is rmly in place and tighten the screws with
the 6.0 mm Allen Wrench (16).

5Ghani Freestanding Tub Faucet Installation Instructions
7. Connect the handshower (10) to the Faucet Body
(1) with the Shower Hose (11).
8. Turn the water on to make sure that all connections
are tight, no water should be leaking. Push the
Decorative Escutcheon (2) into place, and nish
the oor.

6Ghani Freestanding Tub Faucet Installation Instructions
• Raise the handle to make the water ow. Turn the handle to
the left for hot, and to the right for cold.
• Pull the diverter up to divert the water to the handshower.
Push the diverter down to diver the water to the faucet spout.
USAGE: