SIIG AV-GM09F3-S1 User manual

HDMI Pattern Generator & 7.0”LCD Monitor
with 3D and 4K2K
P/N: AV-GM09F3-S1

Safety and Notice
The AV-GM09F3-S1 HDMI Pattern Generator & 7.0” LCD Monitor with 3D and 4K2K has been
tested for conformance to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipments, the AV-GM09F3-S1 should be used with
care. Please read and follow the safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep away the objects that might damage the device and assure that the placement of this unit
is on a stable surface.
Use only the power adapter, power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION.................................................................................................................1
FEATURES.........................................................................................................................1
SPECIFICATIONS..............................................................................................................2
PACKAGE CONTENTS......................................................................................................2
PANEL DESCRIPTIONS.....................................................................................................3
APPLICATION DIAGRAM...................................................................................................4
MENU OPERATION............................................................................................................5
TRANSMISSION TEST.....................................................................................................11
EDID MAC ........................................................................................................................13
NOTICE ............................................................................................................................15
APPENDIX........................................................................................................................16
LIMITED WARRANTY.......................................................................................................18

1
INTRODUCTION
The AV-GM09F3-S1 HDMI Pattern Generator & 7.0” LCD Monitor with 3D and 4K2K is
an advanced HDMI pattern generator with multi-format and multi-pattern support. Besides
still and moving video test patterns, other features such as S/PDIF audio output and EDID
analyzer are also provided. AV-GM09F3-S1 can support up to 8 channel LPCM audio with
selectable sample rate. Another attractive feature of AV-GM09F3-S1 comes from bypassing
HDMI input and allows users with more testing patterns for connected display or treats
AV-GM09F3-S1 as an HDMI switcher. With portable size, AV-GM09F3-S1 is equipped four
buttons and 7” panel to ease the control. With 7” panel, the output signal can be monitored
and controlled through OSD. This device provides a cost effective way to calibrate and test
HDMI enable video devices and displays.
The unique feature available on this mini video pattern generator is the loop test,
which can be used to estimate the condition of transmission line. The loop test provides
signal monitor to watch the pixel loss over HDMI transmission and over time! When HDMI
transmission becomes longer and the requirement on cable quality and HDMI extender
becomes stronger, AV-GM09F3-S1 offers a simple way to evaluate either cables or
extenders!
FEATURES
Supported output resolution
NTSC 525@60, PAL 625@50, 720p@50,720p@59.94, 720p@60, 1080i@50, 1080i@59.94,
1080i@60, 108[email protected]7, 1080p@24, 1080p@25, 108[email protected], 1080p@30, 1080p@50,
[email protected]4, 1080p@60, 4K2K@30
Bit Rate: video bandwidth 300 MHz
Color Depth: 24/30/36 bits
Video Patterns
100% Color Bars, Random Noise, Black / White alternate fields, Full Grey / Full White, Random
Generator for all still patterns, moving squares, white noise, inverse effect with still pattern,
Scrolling Title (see Appendix for illustrations)
HDMI 3D video patterns Supported output resolution
3D video standards include frame packing, top & bottom, side-by-side half, side-by-side full,
frame sequential, and line-by-line.
Audio Patterns
Up to 8 CH LPCM [I2S] audio encoder, S/PDIF[IEC60958], audio mask
AVI Info editor
EDID analyzer
Restorable Settings
7” true color LCD Monitor

2
SPECIFICATIONS
Model Name
AV-GM09F3-S1
Technical
Role of usage
Pattern Generator & LCD Monitor
HDMI standards
HDMI Deep Color & 3D
Video bandwidth
300 MHz
Video support
[Full HD] 1080p@50/59.94/60
[HD] 720p50/59.94/60, 1080p24/30, 1080i50/59.94/60
[SD] [email protected]Hz, PAL@50Hz
HDMI 3D video
4K2K @30
HDMI bypass
Yes
Output impedance
75
Audio support
8 CH LPCM/ S/PDIF
PCB Stack-up
4-layer board [impedance control —differential 100; single 50]
Input
1x HDMI
Output
1x HDMI + CVBS + Component
Control & Fimrware
Update
Mini USB
HDMI connector
Type A [19-pin female]
Mechanical
AV-GM09F3-S1
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
176 x 133 x 10mm [6.9" x 5.1" x 0.4"]
Package
263 x 170 x 97mm [10.4" x 6.7" x 3.8"]
Carton
512 x 364 x 288mm [1'8" x 1'2" x 11.3"]
Weight
Model
709g [25oz]
Package
1.21kg [2.7lbs]
Fixedness
Interlocking power supply
Power supply
12V 5A DC
Power consumption
10 Watts [max]
Operation temperature
0~40C [32~104F]
Storage temperature
-20~60C [-4~140F]
Relative humidity
20~90% RH [no condensation]
PACKAGE CONTENTS
1x AV-GM09F3-S1
1x 12V power supply unit
1x User Manual

3
PANEL DESCRIPTIONS
1. PUSH BUTTON: Up, Down, Enter, Exit Button
2. CVBS OUT : Connect to a CVBS display with a CVBS male-male cable here
3. COMPONENT –Pr OUTPUT
4. COMPONENT –Pb OUTPUT
5. COMPONENT –Y OUTPUT
6. HDMI OUT : Connect to a HDMI display with a HDMI male-male cable here
7. HDMI OUT : Connect to a HDMI display with a HDMI male-male cable here
8. 12V DC power jack
9. Power Switch: Power ON/OFF switch
10. Mini-USB: Serial Control Port
11. Dip Switch: Mode setting
12. HDMI IN : Connect to a HDMI source with a HDMI male-male cable here
Select LCD monitor mode or Component mode
PIN 2
Action
Remark
ON []
LCD monitor mode
For Standard HDMI and CVBS output on
both device LCD and displays connected.
OFF []
Component mode
To output component wither on LCD screen
or displays connected.
F/W update mode
PIN 1
PIN 2
Remark
ON []
OFF []
F/W update mode 1
OFF []
OFF []
Reserved in the usage of technical support
from factory
PS. The Pin 1 has to be set [] before power on the device if you want to do F/W update

4
APPLICATION DIAGRAM

5
MENU OPERATION
Menu
Items
Menu
01. Format
Resolution
576p
576i
480p
480i
720p
1080i
1080p
4K2K
Frequency
23.98
24
24 (Fr-Pa)
24 (Fr-Se)
24 (s-b-s-F)
25
29.97
30
50
59.94
60
60 (T&B)
60 (L-b-L)
60 (s-b-s-H)
Output
DVI
HDMI 24bits
HDMI 30bits
HDMI 36bits
Color
RGB
YCbCr422
YCbCr444
02. Video
Patterns
SMPTE Bar
100% Bar
75% Bar
Grad B→R(H)
Grad B→G(H)
Grad B→B(H)
Grad R→R(H)
Grad G→R(H)
Grad B→R(H)
Grad B→R(V)

6
Grad B→G(V)
Grad B→B(V)
Grad R→B(V)
Grad G→B(V)
Grad B→B(V)
Red level R→B

7
Menu
Items
Menu
02. Video
Patterns
Green level B→G
Green level G→B
Blue level B→B
Gray level B→W
Gray level W→B
100% Red
100% Green
100% Blue
100% White
70% Gray
40% Gray
Black
Noise
Circle 1
Circle 2
Moire
Chess 1
Chess 2
HDMI ByPass
Text
On-White
On-Black
Off
Timer
On-W/B
On-B/W
Off
03. Audio
Channel
1+2
3+4
5+6
7+8
Layout
2CH
8CH
Mode
12S
S/PDIF
Mute
Audio Level
0 dB
-6 dB
-12 dB
-18 dB
-24 dB
-30 dB
-36 dB
-42 dB

8
04. Motion
Motion
No Motion
Square 1
Square 2
2 Squares
Speed
1~8

9
Menu
Items
Menu
05. Feature
AVI Info
ON
OFF
SPD Info
ON
OFF
Audio Info
ON
OFF
MPEG Info
ON
OFF
ACP Package
ON
OFF
HDCP Output
ON
OFF
06. Transmission Test
Test Video
OFF
ON
Test
Start
Stop
Burst Width
1~15
07. EDID
System
Read EDID from Device
(00-03) Byte 0 ~ Byte 3
…
(FC-FF) Byte 252 ~ Byte 255
Saved
Write EDID to Device
(00-03) Byte 0 ~ Byte 3
…
(FC-FF) Byte 252 ~ Byte 255
Save Port 1
Save Monitor’s EDID to Flash
Save Port 2
Save Monitor’s EDID to Flash
Use FHD 8ch ED
Restore Default EDID
Use FHD 2ch ED
Use FHD 3D ED
Use HD 8ch ED
Use HD 2ch ED
Use HD 3D ED
Use UHD 8ch ED
Use UHD 2ch ED
Use Saved EDID
Overwrite EDID by Monitor’s
Port 1 EDID Analyze
Port 2 EDID Analyze
08. System
Status
No Change
Factory
Now Save

10
Version

11
TRANSMISSION TEST
AV-GM09F3-S1 offers the unique estimator for evaluating the quality of cables or extenders. Users
can simply connect the cable or extender under testing to AV-GM09F3-S1 and the built-in loop
monitor will examine the video pixel by pixel! The measured statistics is displayed on OSD and offer
useful information for building up robust A/V systems with HDMI backbone.
1. RX Test
AV-GM09F3-S1 transmitter can send a designed pattern to DUT for user to preview.
2. TX Test
AV-GM09F3-S1 receiver will capture the signal from its transmitter and evaluating the
transmission quality. On this path, user can put cables or any repeater for test..
3. Burst width
AV-GM09F3-S1 offer 15 different widths for different situations up to 4K2K @30 video
resolution.
4. Error Rate
Test Result
Under Standard
TMDS character error rate is less than 10-9
Over Standard
TMDS character error rate is more than 10-9
Note: According HDMI Specification
(1) At TMDS clock frequencies less than or equal to 165MHz, the Sink shall recover data at a
TMDS character error rate of 10-9 or better.
(2) At TMDS clock frequencies above 165MHz, the Sink shall recover data at a TMDS character
error rate of 10-9 or better.
Application Illustration:

12

13
EDID MAC
AV-GM09F3-S1 offers the most convenient way for users to check, copy, and analyze the EDID.
Users can directly check the EDID of the connected byte by byte on AV-GM09F3-S1 or save the
monitor’s EDID into flash! In addition, users can send the saved EDID in the flash through RS-232 to
hyper terminal with the specified baud rate.
1. Default EDID
There are eight sets of default EDID for AV-GM09F3-S1 for user’s selection.
The default EDIDs are showed as follows:
1. Full HD 8 Channel EDID
2. Full HD 2 Channel EDID
3. Full HD 3D EDID
4. HD 8 Channel EDID
5. HD 2 Channel EDID
6. HD 3D EDID
7. UHD 8 Channel EDID
8. UHD 8 Channel EDID
2. System EDID
The EDID of AV-GM09F3-S1 is basically for HDMI inputs. In order to have appropriate EDID for
HDMI sources, users sometimes need to use different EDID for different scenarios or
application.
By entering the following menu state, force AV-GM09F3-S1 to use default EDID.
If users would like to use the EDID learned from monitor, please enter the following menu
state.
3. Save monitor’s EDID
Users can read and save monitor’s EDID by entering the following menu item.
Menu-7 EDID
Saved (00-03):
Menu-12 EDID
Sys Use Def: Undo#:
Menu-12 EDID
Sys Use Saved: Undo#:

14
4. EDID Analyzer
In order to make user easily realize the capability of monitors, AV-GM09F3-S1 also build an EDID
analyzer which can do a quick analysis on EDID content and deliver the most important
information to common usages or installations, such as native resolution, audio support, 3D
support etc.
Menu-7 EDID
Monitor EDID Analyze
Manufacturer: XYZ_1234
ZYX_321 (Monitor’s model name)
NR: [email protected]
DC: 36Bit
Linear PCM 2Ch
AC-3 6Ch
3D Support:
Frame Packing
Frame Packing
Side-By-Side(Half)

15
NOTICE
1. All the information or packet are designed for debugging purpose and AV-GM09F3-S1 will NOT
generate any compressed video or audio.
2. AV-GM09F3-S1 only supports I2S and S/PDIF audio formats. For audio packet, users can setup
different audio format flags in audio packet for debug purposes. AV-GM09F3-S1 will output the
chosen audio format, either I2S or S/PDIF, according to the mode section of 03-Audio.
3. Same to MPEG info. The MPEG info is designed for debugging purpose and AV-GM09F3-S1 will
NOT generate any compressed video or audio.

16
APPENDIX
Built-in Video Patterns
SMPTE bar
100% bar
75% bar
Grad B →R(H)
Grad B →G(H)
Grad B →B(H)
Grad R →B(H)
Grad G →B(H)
Grad B →B(H)
Grad B →R(V)
Grad B →G(V)
Grad B →B(V)
Grad R →B(V)
Grad G →B(V)
Grad B →B(V)
Red level B →R
Red level R →B
Grn level B →G
Grn level G →B
Blu level B →B
Blu level B →B
Gra level B →W
Gra level W →B
100% Red
100% Green
100% Blue
100% White
70% Gray

17
40% Gray
Black
Noise
Circle 1
Circle 2
Moire
Chess 1
Chess 2
HDMI ByPass
HDMI ByPass
HDMI ByPass
HDMI ByPass

18
LIMITED WARRANTY
The SELLER warrants the AV-GM09F3-S1 HDMI Pattern Generator & 7.0” LED Monitor with
3D and 4K2K to be free from defects in the material and workmanship for 3 years from the date of
purchase from the SELLER or an authorized dealer. Should this product fail to be in good working
order within 3 years warranty period, The SELLER, at its option, repair or replace the unit, provided
that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications
including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current price of
parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day
of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or
assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted
without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular purpose, all
of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are
responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty
and cable must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However,
The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages
resulting from any defect or omission in this manual, even if advised of the possibility of such
damages. Also, the technical information contained herein regarding the AV-GM09F3-S1 features
and specifications is subject to change without further notice.
April, 2018
Support
For more info or tech support
http://www.siig.com/support