Silca SMART User manual

SMART
Remote Programmer
Operang Manual
D447313XA
vers. 1.1
Powered by

Copyright Silca S.p.A. 20172
SMART Remote Programmer
G
B
Fig./Abb.1
A
Fig./Abb.2
G
F
D
E
Fig./Abb.3
D
E
O

3Copyright Silca S.p.A. 2017
SMART Remote Programmer
I
C
N
Fig./Abb.4
Fig./Abb.5
H
Fig./Abb.6
ML

Copyright Silca S.p.A. 20174
SMART Remote Programmer
EN
(c) 2016 Silca S.p.A. - Vittorio Veneto
This manual has been drawn up by Silca S.p.A.
All rights reserved. No part of this publication can be reproduced or circulated by any means (photocopies, microfilm or other)
without the approval of Silca S.p.A.
Edition: February 2017
by SILCA S.p.A.
Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italy
IT
(c) 2016 Silca S.p.A. - Vittorio Veneto
La stesura di questo manuale è stata curata da Silca S.p.A.
Tutti i diritti sono riservati. Nessuna parte della pubblicazione può essere riprodotta o diffusa con un mezzo qualsiasi (fotocopie,
microfilm o altro) senza il consenso di Silca S.p.A.
Edizione: Febbraio 2017
Da SILCA S.p.A.
Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italia
DE
(c) 2016 Silca S.p.A. - Vittorio Veneto
Dieses Handbuch wurde von Silca S.p.A. herausgegeben.
Alle Rechte vorbehalten. Jede Vervielfältigung durch Fotokopien, Mikrofilme, usw. bedarf der vorherigen Genehmigung von Silca
S.p.a.
Ausgabe: Februar 2017
von SILCA S.p.A.
Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italie
FR
(c) 2016 SILCA S.p.A. - Vittorio Veneto
Ce mode d’emploi a été rédigé par SILCA S.p.A.
Tous les droits sont réservés. Aucune partie de cette publication ne pourra être reproduite ou divulguée quel que soit le moyen
utilisé (photocopies, microfilm ou autre) sans le consentement écrit préalable de SILCA S.p.A.
Edition: Février 2017
par SILCA S.p.A.
Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italie
ES
(c) 2016 Silca S.p.A. - Vittorio Veneto
Este manual ha sido redactado por Silca S.p.A.
Reservados todos los derechos. Ninguna parte de la publicación puede ser reproducida o difundida con cualquier medio fotocopias,
microfilm u otro) sin el permiso de Silca S.p.A.
Edición: Febrero 2017
Por SILCA S.p.A.
Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italia
PT
(c) 2016 Silca S.p.A. - Vittorio Veneto
Este manual foi redigido pela Silca S.p.A.
Todos os direitos reservados. Nenhuma parte da publicação pode ser reproduzida ou divulgada com qualquer meio (fotocópias,
microfilmes ou outro) sem a autorização da Silca S.p.A.
Edição: Fevereiro 2017
pela SILCA S.p.A.
Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Itália
NL
(c) 2016 Silca S.p.A. – Vittorio Veneto
Deze handleiding werd opgesteld door de firma Silca S.p.A.
Alle rechten zijn voorbehouden. Geen enkel deel van deze publicatie mag vermenigvuldigd of verspreid worden, door gelijk welk
hulpmiddel (fotokopieën, microfilms of andere hulpmiddelen), zonder toestemming van de firma Silca S.p.A.
Editie: Februari 2017
door SILCA S.p.A.
via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italië

SMART Remote Programmer English
5Copyright Silca S.p.A 2017
USE OF THE MANUAL
This manual is an integral part of the device literature.
The manual gives informaon that the operator should know to use the device safely.
User Manual
This manual should be read carefully by all those using the Smart Remote Programmer. It is essenal for the
proper use and maintenance of the device.
The manual must be kept carefully throughout the life of the device, including the disposal stage. Keep it in a
dry place close to the machine where it is always at hand for the operator.
Device ID
The device has an ID plate showing the serial number located on the back .
Device references and name
Certification references
Serial Number
See Fig.5
Note: remove the rubber grip to see the ID data.
GENERAL WARNINGS
The device is in compliance with the following standards CE and cerficaons FCC, IC .
The materials used in manufacture and the components employed in using the device are safe if the device is
used correctly and ensure that the machine complies to current standards.
1 - TO ENSURE PROPER RELIABLE OPERATION PLACE THE SMART REMOTE PROGRAMMER AWAY FROM ANY
SOURCES OF RADIO INTERFERENCE SUCH AS:
- CORDLESS PHONES
- ELECTRIC MOTORS
- NEON LIGHTS
- MODEM WI-FI
2 - PLEASE INSTALL THE SMART REMOTE PROGRAMMER SOFTWARE IN YOUR PC BEFORE CONNEC-
TING THE USB CABLE, THIS MIGHT TAKE A FEW MINUTES. ( See chapter SOFTWARE - OPERATING GUIDE )
ONLINE DOCUMENTATION
-For document updates and to download new updates of the Smart Remote Programmer soware
please check our website www.silca.biz - www.ilco.us periodically. ( See chapter SOFTWARE -
OPERATING GUIDE )
FOR MORE INFORMATION SEE www.silca.biz - www.ilco.us, AND SEARCH FOR “SRPSOFTWARE “ .
SRPSOFTWARE

SMART Remote Programmer
Copyright Silca S.p.A 2017
English
6
DEVICE DESCRIPTION
The Smart Remote Programmer has an external user interface provided by a PC, Smartphone or
tablet application that allows the user to complete the functions.
WORKING PARTS SEE PAGG. 23
A - USB port for PC connecon
B - Remote key reading / preseng area
C - Reference “Made in”
D - Red LED (Power LED)
E - Blue LED (Bluetooth LED)
F - On/offbuon (funcons only if used with
baeries )
G - Reset buon
H - Baery housing
I - Serial Number
L - USB cable (provided)
M - Alkaline AA 1.5 Volt non-rechargeable baeries
(4 provided)
N - Smart Remote Programmer ID label
O - Rubber grip
FUNCTIONS:
- Idenfies types and frequencies of vehicle key remotes
- Reads the frequency of the key remote control (frequency meter).
- Preset remotes via NFC using PC or smartphone or tablet
TECHNICAL DATA
Power supply
The device is powered via the USB cable connecon or with 4 alkaline batteries type AA
Input Voltage : 6V
Input power : 0.9W
Input current : 150mA
Antenna field frequencies
NFC ANTENNA 13,56 MHz
Bluetooth antenna 2,45 GHZ
Environment conditions
The SMART Remote Programmer will operate at ambient temperatures from 0 to +50°C
Dimensions
Width 84 mm
Length 145 mm
Depth 30 mm
Weight
181 gr

SMART Remote Programmer English
7Copyright Silca S.p.A 2017
FEATURES
POWER ON (F) (Fig.3)
This buon works only if the device is powered by the baeries; press buon to power on, hold it for more
than 3 seconds to power off. If the device is powered from a PC using the USB cable the device is always on.
RESET G (Fig.3)
Use if the device is not responding to programming instrucons.
LED
There are 2 leds on the device
RED led (D): (Fig.3)
- fixed light: device is on;
- blinking light : device is receiving and transming data
BLUE led (E): (Fig.3)
- fixed light: device connected to mobile device via Bluetooth;
- blinking light: device is disconnected
USING THE SMART REMOTE PROGRAMMER
The SMART Remote Programmer can be connected in following ways:
- Via a USB to a PC using the appropriate soware available on www.silca.biz - www.ilco.us
- Via Bluetooth 4.0 to Android or IOS mobile devices
Procedure for using the Smart Remote Programmer with a PC:
Aer having installed the appropriate soware on the PC switch on the Smart Remote Programmer connec-
ng it with the USB cable to a PC.
- On the PC open the Smart Remote Programmer soware and check that the device is connected. If a
message says “drivers not installed” please install the drivers by opening the folder “drivers” in the Smart
Remote Programmer file. Restart the program.
- Select the search funcons by clicking the icon at the top of the screen
- Select the car model needed to preset the remote
- Place the new Ilco/Silca remote on area “B” of the device
- Select “preset the remote icon” on the screen and follow the instrucons given
- The device will preset the Ilco/Silca new remote ready for programming in the vehicle
Procedure for using Smart Remote Programmer with a Smartphone or Tablet:
- Switch on the Smart Remote Programmer by pressing buon “F” (check that the baeries are installed) and
the red LED “D” is lit.
- Switch on the bluetooth connecon on the smartphone or tablet
-Aer starng the App the user will be guided through the process to connect the Smart Remote Program-
mer
- Open the main menu by clicking icon at the top of the screen
- Select the Search funcon
- Select the car model needed to preset the remote
- Place the new Ilco/Silca remote on area “B” of the device
- Select “programm buon” on the screen and follow the instrucons given
- The device will preset the Ilco/Silca new remote ready for programming in the vehicle

SMART Remote Programmer
Copyright Silca S.p.A 2017
English
8
SOFTWARE AND OPERATING GUIDE
The remotes preseng is done via NFC technology by placing the remote in the specific area “B” (Fig. 2) and
selecng the specific funcon in the PC soware or in the mobile device APP.
PC PROGRAM
The Smart Remote Programmer soware has been developed to allow interfacing between the Smart Remote
Programmer and a PC.
The program can be downloaded free of charge from www.silca.biz - www.ilco.us web site and can be installed
on MicrosoWindows Vista, 7, 8 and 10 operang systems.
FOR MORE INFORMATION SEE www.silca.biz - www.ilco.us, AND SEARCH FOR “SRPSOFTWARE “ .
SRPSOFTWARE
MYSILCA SRP
MySilca SRP App has been developed to allow interfacing between the Smart Remote Programmer and an
Android or IOS mobile device.
The App can be downloaded free of charge from Google Play or App Store and can be installed on Android
or IOS devices with Bluetooth 4.0.
REPLACING / INSERTING BATTERIES
Lithe baery housing cover “H” (Fig. 6). Remove the exhausted baeries and fit four new 1.5V alkaline
baeries(AA), taking care to posion the poles properly. Replace the cover.
WARNING: DANGER OF EXPLOSION IF THE BATTERY IS REPLACED WITH ONE OF THE WRONG TYPE