SiliconDust HD HomeRun PRIME User manual

4.Play Ready and CableCARD Activation
During Media Center set up - you will be required to install Play Ready
After card is activated by your
cable company
- continue with Media Center set
up by following the prompts.
You will also be asked to Activate your
M-CARD CableCARD supplied by your
cable company - follow the instructions
on screen - be prepared to call your
cable company as instructed on screen.
(3CC & 6CC)

5627 Stoneridge Dr., Suite 324,
Pleasanton, CA 94588
OPTIONAL Equipment
* may be supplied by your cable provider only as needed
Switched Digital/Tuning Adapter
(Skip this section if your cable provider is not using switched digital video and does not require
the use of a tuning adapter/resolver.)
Connect the incoming coaxial cable to the IN port on the tuning adapter, and connect a
coaxial cable between the OUT port on the tuning adapter and the CABLE IN port on your
HDHomeRun PRIME. Connect a USB cable between the tuning adapter and the USB port on
your HDHomeRun PRIME. Connect the power cable on the tuning adapter.
you
r
HDHomeRun
P