Silk'n Motion H3220 User manual

INSTRUCTIONS FOR USE
INSTRUCTIONS D’UTILISATION
GEBRUIKSINSTRUCTIES
INSTRUCCIONES DE USO
INSTRUÇÕES DE UTILIZAÇÃO
ΟΔΗΓΊΕΣ ΧΡΉΣΗΣ
BRUKSANVISNING
BRUKSANVISNING
BRUGERVEJLEDNING
BEDIENUNGSANLEITUNG
KULLANIM KILAVUZU
MANUALE OPERATIVO
NL
ES
PT
GR
NO
FI
SV
DA
RU
DE
EN
EN
EN
DE
FR
NL
ES
PT
GR
TR
NO
IT
SV
DA
Beautiful Technology
TM
Motion
H3220
InnoEssentials International
Donk 1B, 2991 LE Barendrecht
The Netherlands
[email protected]
www.silkn.eu
Flash&Go Pro Motion UM EU124 2111A cover ED82-03.indd 1 1/6/2017 21:00:48

1
ENEN
Copyright 2017 © Home Skinovations Ltd.
All rights reserved.
Legal Notice
Home Skinovations Ltd reserves the right to make changes to its
products or specications to improve performance, reliability, or
manufacturability. Information furnished by Home Skinovations Ltd
is believed to be accurate and reliable at the time of publication.
However, Home Skinovations Ltd assumes no responsibility for its use.
No license is granted by its implication or otherwise under any patent
or patent rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose,
without the express written permission of Home Skinovations Ltd.
Data is subject to change without notication.
Home Skinovations Ltd has patents and pending patent applications,
trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. The furnishing of this document does
not give you any license to these patents, trademarks, copyrights, or
other intellectual property rights except as expressly provided in any
written agreement from Home Skinovations Ltd. Specications are
subject to change without notice.
SILK'N and the SILK'N logo are registered trademarks of Home
Skinovations Ltd, Tavor Building, Shaar Yokneam POB 533, Yokneam
2069206, ISRAELwww.silkn.eu or www.silkn.com, [e-mail].
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 1 1/6/2017 20:57:37

2
ENEN
Table of contents
1. Get to know your Silk'n Motion ....................................... 3
2. Safety with Silk'n Motion ................................................. 4
3. Contraindications & warnings ......................................... 4
4. Do not use Silk'n Motion if: .............................................. 6
5. Consult your physician before use if you have:.............. 7
6. Safety tips.......................................................................... 7
7. Possible side eects.......................................................... 8
8. Long-term hair removal the Silk'n way ......................... 10
9. Get started!...................................................................... 14
10. After treatment ............................................................... 16
11. Maintenance.................................................................... 16
12. Troubleshooting ............................................................. 17
13. Customer service............................................................. 18
14. Warranty .......................................................................... 18
15. Disposal ........................................................................... 18
16. Specications .................................................................. 19
17. Signs and symbols .......................................................... 20
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 2 1/6/2017 20:57:37

3
ENEN
1. Get to know your Silk'n Motion
Silk'n Motion is a light-based device for permanent hair reduction designed
for home-use. It is a powerful electrical device and should be used with
special attention to safety. Be sure to read all warnings, contraindications and
safety precautions before use, and follow them strictly. We recommend you
re-familiarize yourself with the instructions before each treatment.
1.1 Package contents
yHair removal device yCleaning cloth
yAdapter with cable yWarranty card
yStorage case yUser manual
1.2 Device description
Refer to the diagram at the front of this manual to see the location of each
feature of your Silk'n Motion .
1. Energy level indicator lights (1-5)
2. Skin colour sensor light
3. Ready light
4. Control button
5. Skin colour sensor
6. Treatment surface
7. Adapter socket
Intended use
Silk'n Motion is intended to remove unwanted hair and eect long-term, or
permanenthairreduction.Permanenthairreductionisdenedasalong-term
stable reduction in the number of hairs re-growing after a treatment regime.
You may use Silk'n Motion to remove unwanted body hair. Ideal body areas
include the underarms, bikini line, arms, legs, face (below the cheekbones),
back, shoulders and chest.
Do not use this device for any purpose other than as described in this manual.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 3 1/6/2017 20:57:37

4
ENEN
2. Safety with Silk'n Motion
With Silk'n Motion safety comes rst
Home Pulsed Light™ (HPL) technology in Silk'n Motion provides superior
safety with lower energy levels. HPL achieves long-term hair removal results
at a fraction of the energy level used in other light-based hair removal
equipment. The low energy reduces the risk of harm or complications, and
contributes to your overall safety.
3. Contraindications & warnings
Silk'n Motion is not designed for everyone.
Hair removal by lasers or intense pulsed light sources can
cause increased hair growth in some individuals. Based
upon currently available data, the highest risk groups
for this response are females of Mediterranean, Middle
Eastern and South Asian heritage when used on the face
and neck. For more information visit www.silkn.eu or your
local Silk'n domain.
E
This device must not be used by the following people:
children, adults with limited physical, sensory or
psychological capacities, or those lacking experience
or knowledge in how to use the device. Children
should be supervised to ensure that they do not play
with the device.
K
Do not expose treated areas to the sun, and do not
use energy levels 2-5 on tanned skin or after recent
sun exposure (including articial tanning machines).
Refer to section "6.1 Exposure to the sun".
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 4 1/6/2017 20:57:37

5
ENEN
E
Use below the cheekbones and not around the eyes.
E
Do not use on areas with injected lls or toxins.
E
Do not treat on tattoos or permanent makeup, dark
brown or black spots, (such as large freckles, moles, or
warts), nipples, genitals, or lips.
E
Do not treat on active eczema, psoriasis, lesions, open
wounds or infections (cold sores), abnormal skin
conditions caused by systemic or metabolic diseases
(diabetes for example).
E
Abnormal skin conditions caused by diabetes,
systemic or other metabolic diseases.
E
Do not treat on an area that has a history of herpes
outbreaks.
E
Do not use if you are pregnant or nursing.
E
Do not treat on areas where you may want hair to
grow.The results are permanent.
E
Do not treat the same area of skin more than once
per hair removal session.
E
Stop use immediately if your skin is very red, or if your
skin blisters or burns.
E
Use a lower energy level if you experience any
discomfort.
E
Never use ammable liquids such as alcohol
(including perfumes, sanitizers, or other applications
containing alcohol), or acetone to clean the skin
before use.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 5 1/6/2017 20:57:37

6
ENEN
A
Keep your device away from water or liquids! Do not
use near bathtubs, showers, basins or other vessels
containing water. Do not place or store the device
where it can fall, be pushed or placed anywhere
near water. There is a risk of electrocution. Unplug
immediately if the device comes into contact with
any uids, and contact Customer Service.
E
Remove all jewellrey before use.
E
Never leave the device unattended when plugged
into an outlet. Keep the AC/DC adapter accessible at
all times, so it can be removed from the socket easily
in case of emergency.
E
Do not attempt to modify, open or repair your device.
You may expose yourself to dangerous electrical
components or pulsed light energy. You may cause
serious harm to yourself, and you will void your
warranty.
4. Do not use Silk'n Motion if:
The plug, attachments or accessories for this device are not
recommended by Home Skinovations Ltd.
The device has a damaged cord or plug. Keep the power cord
away from heated surfaces.
You see or smell smoke when it is in use.
The skin colour sensor, treatment surface, or device casing is
cracked or coming apart.
The device is not working or appears to be damaged in any
other way.
In such cases, contact Silk'n Customer Service.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 6 1/6/2017 20:57:37

7
ENEN
5. Consult your physician before use if you have:
A history of kelodial scar formation.
Epilepsy.
A disease related to photosensitivity, such as porphyria,
polymorphic light eruption, solar urticaria, lupus, etc.
A history of skin cancer or areas of potential skin malignancies.
Received radiation therapy or chemotherapy treatments within
the past 3 months.
Used physician-prescribed drugs on your skin within the past 6
months.
Any other condition which, in your physician’s opinion, would
make it unsafe for you to be treated.
6. Safety tips
This section has information to help you use your device safely.
6.1 Exposure to the sun
The lowest energy level (1) is designed for safe use even after
sun exposure.
If you use energy levels 2-5, avoid further exposure to the sun
for 4 weeks before and 2 weeks after your treatment. This is
because higher quantities of melanin expose the skin to greater
risk when using any method of light-based hair removal. This
applies to all skin types, even those that don't seem to tan
quickly.
We don't advise it, but if you have to go out in the sun after a
treatment, be sure to apply sunscreen SPF30 or higher to the
treated area. Do this for 2 weeks after a treatment.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 7 1/6/2017 20:57:37

8
ENEN
6.2 Exposure of pulse light to the eyes
Although you can use the device to treat facial hair, take extra
care to avoid contact with the eyes, and use only below the
cheekbones.
6.3 Wounds or infections
Wait for the aected area to heal before further use.
7. Possible side eects
If you follow the instructions fully and pay attention to all warnings and
contraindications, complications and side eects are uncommon. However
every cosmetic procedure, including those designed for home use, involves
some degree of risk. Therefore, it is important that you understand and
accept the risks and complications that may occur with pulsed light hair
removal systems designed for home use.
Minor skin discomfort
Home pulsed light hair removal is generally well-tolerated. However, some
users feel mild discomfort during use. This is best described as a mild
stinging sensation on the treated skin areas. The stinging sensation may
last during or after treatment.
This means that you should use Silk'n Motion at a lower energy level, and if
that doesn't help, you should stop using the device.
Skin redness
Your skin may become red immediately after using the device or within 24
hours. Redness generally clears up within 24 hours.
See your doctor if redness does not go away within 2 to 3 days.
Make sure you use the energy level that is comfortable for you and suitable
for your skin colour.
Increased sensitivity of the skin
The skin of the treated area is more sensitive so you may encounter
dryness or aking of the skin.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 8 1/6/2017 20:57:37

9
ENEN
Pigment changes
Silk'n Motion targets the hair shaft, in particular the pigmented cells
in the hair follicle and the hair follicle itself. Nevertheless there is a
risk of temporary hyperpigmentation (increased pigment or brown
discolouration) or hypo-pigmentation (whitening) to the surrounding skin.
Risk of changes in skin pigmentation is higher for people with darker skin
tones or heavily tanned skin. Usually discolouration or changes to skin
pigment are temporary, and permanent hyperpigmentation or hypo-
pigmentation are rare.
Excessive redness and swelling
In rare cases, treated skin may become very red and swollen. This is more
common in sensitive areas of the body. The redness and swelling should
subside within 2 to 7 days and should be treated with frequent applications
of ice. Gentle cleansing is OK, but avoid exposure to the sun.
Blisters or burns
Cool the aected area and apply anti-burn cream. Wait until the area has
healed completely before another treatment, and use a lower energy level.
If the skin does not return to normal within 3 days, consult your
physician.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 9 1/6/2017 20:57:37

10
ENEN
8. Long-term hair removal the Silk'n way
The eciency of hair removal varies from person to person according
to body area, hair colour, and how Silk'n Motion is used. A typical full hair
growth cycle may take 18-24 months. During this time, multiple treatment
sessions are required to achieve permanent hair removal.
A typical Silk'n Motion hair removal plan during a full hair growth cycle
includes:
Treatments 1-4: Plan two weeks apart.
Treatments 5-7: Plan four weeks apart.
Treatments 8+: Treat as needed, until desired results are
achieved.
8.1 Expected treatment outcomes
Individual response depends on hair type as well as biological factors that
may aect hair growth patterns. Some users may respond quicker or slower
than the average number of treatments.
Skin
Type1
Body
Hair2
Light
Fluence
[J/cm2]
Part of the
Body
Average
Treatment
Time
Eectiveness
of Hair
Removal
1-5
Dark
blonde to
brown
2.5-4
Lower or
upper legs 60%
Arms Session 10-
12, approx.
4 weeks
apart.
50%
Bikini line 60%
Underarms 55%
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 10 1/6/2017 20:57:37

11
ENEN
Skin
Type1
Body
Hair2
Light
Fluence
[J/cm2]
Part of the
Body
Average
Treatment
Time
Eectiveness
of Hair
Removal
1-5 Brown to
black 2.5-4
Lower or
upper legs Sessions
8-10
approx.
4 weeks
apart.
70%
Arms 60%
Bikini line 70%
Underarms 65%
1Skin types are based on the Fitzpatrick scale of skin colours. Refer to the skin
colour chart in the diagram at the front of the manual.
2Not eective on white body hair.
8.2 Energy Levels
The energy level determines the intensity of the light pulse delivered to your
skin. As the energy level increases, so do hair removal results, as well as the risk
of possible side eects and complications.
The device has 5 levels of energy from 1 (the lowest) to 5 (the
highest), represented by 5 energy level indicator lights.
When the device is turned on, the energy level is set to level 1
automatically. Only one energy level indicator light will be on.
To change the energy level, press the control button repeatedly
to increase the energy level from 1 to 5. Once at level 5, press
the control button again to reduce the energy level from 5 back
to 1.
M
To determine the right energy level for your treatment area,
refer to section "9.1 Before your rst treatment".
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 11 1/6/2017 20:57:37

12
ENEN
8.3 Pulsing and gliding
Pulsing is the best technique for working at higher energy levels.
Press the treatment surface against your skin. Work in rows
(either across or down as shown in the image). Start at one end
of each row and progress to the other end.
The treatment surface creates temporary pressure marks on the
treated area so you can see areas you have treated.
After each pulse, move the treatment surface to the next spot.
Keep doing this pulsing action for the area you are treating.
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for working at lower energy levels.
Press the treatment surface rmly against your skin and slowly
glide over your skin (either across or down as shown in the
image). Make sure that the treatment surface is always touching
your skin.
At lower energy levels, the device takes only 1-1.5 seconds to
recharge between pulses. This generates a nonstop sequence
of ashes.
Glide at a speed so that you avoid gaps or overlaps.
EDo not treat the same area of skin more than once per hair removal
session.
EStop use immediately if you have any discomfort.
Silk’n
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 12 1/6/2017 20:57:37

13
ENEN
8.4 Device sensors
Your Silk'n Motion has three sensors. for touch, movement, and colour.
Touch and Movement: The device will only emit repeated
pulses when it is in rm contact with your skin, and you keep
moving it across your skin.
Colour: Light-based hair removal on darker skin tones may
result in adverse eects such as burns, blisters, and skin colour
changes (hyper- or hypo-pigmentation). Your Silk'n Motion
has a skin colour sensor that detects the colour of your skin
automatically. The skin colour sensor checks your skin colour at
the start of, and occasionally during, each treatment.
M
If Silk'n Motion detects that your skin tone is dark, and the
energy level is set to 3 or higher, the device will auto-adjust
and set the energy level back to 2.
8.5 What to expect when treating with Silk'n
For many people, using Silk'n Motion may be their rst experience with a
light-based device. During a treatment session it is normal to experience or
feel:
Noise: The cooling fan makes noise similar to a hair dryer. This
is normal.
A popping sound: With each ash of HPL™ light.
A sensation of warmth and tingling: During each light
pulse.
Some redness: It is not uncommon to see some very mild,
pink-like skin colouration during or just after a treatment. This is
usually most noticeable around the hairs themselves.
EStop use immediately if you see your skin is very red.
EContactyourphysicianimmediately,ifyouexperienceanycomplication.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 13 1/6/2017 20:57:37

14
ENEN
9. Get started!
To use your Silk'n Motion , follow these steps:
1. Remove the device and other components from box.
2. Plug the adapter cord into the device socket and plug the adapter into
an electrical outlet. All energy level indicator lightswill turn on, and then
go o.
9.1 Before your rst treatment
ERemove all jewellery before use.
You must decide which energy level is right for your skin, and the area you
want to treat. The device has 5 levels of energy from 1 (the lowest) to 5 (the
highest). Forexample, youmighttreat one areaatenergy level 1,andanother
at level 4. For information on energy levels, refer to section "8.2 Energy levels".
To choose the right energy level, test each treatment area separately (refer to
the skin colour chart at the front of this manual).
1. Press the control button to turn on the device. The level 1 energy level
indicator light will go on.
2. Place the treatment surface on your skin to deliver one pulse. If you do
not experience abnormal discomfort press the control button again.
This will increase the energy level. Deliver one pulse on a dierent spot
at energy level 2.
3. Continue testing at increased energy levels. Use the energy levels
indicated on the skin colour chart. When you nd the highest energy
level that is comfortable for that treatment area, you can start your
treatment.
EUse a lower energy level if you experience any discomfort.
Repeat this test for each part of the body you wish to treat.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 14 1/6/2017 20:57:37

15
ENEN
You are now ready to use your Silk'n Motion
1. Before treating an area, the skin should be shaved, clean, dry and free
of any powders, antiperspirants or deodorants. Do not wax, pluck
or tweeze the hair out.
MBe sure to cover up moles, warts or other marks on the skin
that should not be treated.
2. Press the control button. The device will turn on, the level 1 energy
indicator light will be on, and a fan sound will start.
3. Approximately 1 second after pressing the control button, the ready
light will turn on. The device is then ready to use at the lowest energy
level.
4. Set the energy level. Press the control button repeatedly to increase
the energy level until you have the level you want. The energy level
indicator lights indicate the energy level setting (refer to section "8.2
Energy levels").
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to
section "8.3 Pulsing and gliding").
6. Apply the treatment surface to the skin. Make sure that the skin is
spread evenly and smoothly. When the treatment surface is in full
contact with the skin, the ready light will start blinking slowly.
7. The device will rst determine the colour of your skin automatically
and it will ash a pulse of light onto your skin. You will feel a mild
sensation of warmth and tingling, and you may hear a popping
sound.
8. If you are pulsing, remove the device from your skin. The device
will immediately recharge for the next pulse. After a few seconds
(depending on the energy level) the ready light will turn on again, and
start blinking slowly when pressed against the skin. If you are pulsing,
repeat the process. If you are gliding, simply continue.
9. Continue to pulse or glide until you have treated the area fully.
EStop use immediately, if your skin blisters or burns.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 15 1/6/2017 20:57:37

16
ENEN
10. After treatment
When you have nished your treatment session:
1. Turn the device o by giving the control button an extended press.
Remember the last energy level setting you used, because it will not
be restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.
11. Maintenance
It is important to clean your Silk'n Motion device after each treatment. To
clean the device:
LUnplug the device.
LTo clean the device including the treatment surface, wipe with
a clean, dry cloth. Never use acetone or other abrasive uids,
because they will damage your device.
LAfter cleaning, we recommend you store the device in its
original box.
ENever immerse your Silk'n Motion or any of its parts in water.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 16 1/6/2017 20:57:37

17
ENEN
12. Troubleshooting
Do not attempt to open or repair your device . You may expose yourself to
dangerous electrical components or pulsed light energy, and may cause
serious harm to yourself. It will also void your warranty.
Problem Checks
My device does not
start.
Make sure the adapter is properly connected to
the device and that it is plugged into an electrical
outlet on the wall.
There is no light pulse
when the device
touches my skin.
Check that the device is connected and the ready
light is on. Make sure that the treatment surface is
evenly and rmly pressed to the skin and that you
are moving the device across your skin.
One or more lights
blink. The device has malfunctioned.
The device has stopped
working and is in
standby mode.
Press the control button again to start the device.
For problems or queries, please contact Silk'n Customer Service.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 17 1/6/2017 20:57:37

18
ENEN
13. Customer service
See our website for more information: www.silkn.eu. This manual is also
available as a PDF download from: www.silkn.eu. Contact Customer Service
to report unexpected operations or events, or any other problem with your
device. Our contact details are:
Country Service number Email
Belgium 0900-25006 [e-mail]
France 0891-655557 serviceconsommateur[email protected]
Germany 089 51 23 44 23 [e-mail]
Italy ser[email protected]
Netherlands 0900-2502217 [e-mail]
Spain 807088200 ser[email protected]
UK 0906-2130009 [e-mail]
Other countries [phone]
550 [email protected]
14. Warranty
Refer to your Silk'n warranty card.
15. Disposal
N
Help protect the environment. Do not dispose with household waste
and be sure to follow your country's laws for the disposal of electrical
items.
Flash&Go Pro UM EU124 2111A inside ED82-07.indd 18 1/6/2017 20:57:37