Silk'n JEWEL H3210 User manual

inf[email protected]
www.silkn.eu
INSTRUCTIONS FOR USE
INSTRUCTIONS D’UTILISATION
GEBRUIKSINSTRUCTIES
INSTRUCCIONES DE USO
INSTRUÇÕES DE UTILIZAÇÃO
ΟΔΗΓΊΕΣ ΧΡΉΣΗΣ
BRUKSANVISNING
BRUKSANVISNING
BRUGERVEJLEDNING
BEDIENUNGSANLEITUNG
KULLANIM KILAVUZU
MANUALE OPERATIVO
NL
ES
PT
GR
NO
FI
SV
DA
RU
DE
EN
EN
EN
DE
FR
NL
ES
PT
GR
TR
NO
IT
SV
DA
JEWEL
Beautiful Technology
TM
H3210
H3211

1
ENEN
Copyright 2016 © Home Skinovations Ltd.
All rights reserved. Print date: 07/2016
Legal Notice
Home Skinovations Ltd. reserves the right to make changes to its products
or specications to improve performance, reliability, or manufacturability.
Information furnished by Home Skinovations Ltd. Is believed to be accurate
and reliable at the time of publication. However, Home Skinovations Ltd.
assumes no responsibility for its use. No license is granted by its implication
or otherwise under any patent or patent rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the
express written permission of Home Skinovations Ltd. Data is subject to
change without notication.
Home Skinovations Ltd. has patents and pending patent applications,
trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. The furnishing of this document does
not give you any license to these patents, trademarks, copyrights, or other
intellectual property rights except as expressly provided in any written
agreement from Home Skinovations Ltd. Specications are subject to
change without notice.
Home Skinovations Ltd. Tavor Building, Shaar Yokneam POB 533, Yokneam
2069206, ISRAEL www.silkn.eu or www.silkn.com, [email protected].

2
ENEN
Table of contents
1. Get to know your Silk'n Jewel .......................................... 3
2. Safety with Silk'n Jewel .................................................... 4
3. Contraindications & warnings ......................................... 4
4. Do not use Silk'n Jewel if:................................................. 6
5. Consult your physician before use if you have:.............. 6
6. Safety tips.......................................................................... 7
7. Possible side eects.......................................................... 8
8. Long-term hair removal the Silk'n™ way......................... 9
9. Get started....................................................................... 12
10. After treatment ............................................................... 14
11. Maintenance.................................................................... 15
12. Troubleshooting ............................................................. 15
13. Customer service............................................................. 16
14. Warranty .......................................................................... 16
15. Disposal ........................................................................... 16
16. Specications .................................................................. 17
17. Signs and symbols .......................................................... 18

3
ENEN
1. Get to know your Silk'n Jewel
Silk'n Jewel™ is a light-based device for permanent hair reduction designed for
home use. It is a powerful electrical device and should be used with special
attention to safety. Be sure to read all warnings, contraindications and safety
precautions before use, and follow them strictly. We recommend you re-famil-
iarize yourself with the instructions before each treatment.
1.1 Package contents
Your Silk'n Jewel package includes:
y Hair removal device
y User manual
y Adapter
y Warranty card
1.2 Device description
Refer to the diagram at the front of this manual to see the location of each
feature of your Silk'n Jewel.
1. Adapter socket
2. Energy level indicator lights (1-5)
3. Control button
4. Ready light
5. Skin colour sensor light
6.Treatment surface
7. Skin colour sensor
1.3 Intended use
Silk'n Jewel is intended to remove unwanted hair and eect long-term, or
permanent hair reduction. Permanent hair reduction is dened as a long-term
stable reduction in the number of hairs regrowing after a treatment regime.
You may use Silk'n Jewel to remove unwanted body hair. Ideal body areas
include the underarms, bikini line, arms, legs, face, back, shoulders and chest.

4
ENEN
2. Safety with Silk'n Jewel
With Silk'n Jewel safety comes rst
Home Pulsed Light™ (HPL) technology in Silk'n Jewel provides superior safety
with lower energy levels. HPL achieves long-term hair removal results at a
fraction of the energy level used in other light-based hair removal equipment.
The low energy reduces the risk of harm or complications, and contributes to
your overall safety.
3. Contraindications & warnings
Silk'n Jewel is not designed for everyone.
Hair removal by lasers or intense pulsed light sources can
cause increased hair growth in some individuals. Based
upon currently available data, the highest risk groups for
this response are females of Mediterranean, Middle Eastern
and South Asian heritage when used on the face and neck.
For more information visit www.silkn.eu, www.silkn.com, or
your local Silk'nTM domain.
E
This device must not be used by the following people:
children, adults with limited physical, sensory or
psychological capacities, or those lacking experience or
knowledge in how to use the device. Children should
be supervised to ensure that they do not play with the
device.
K
Do not use energy levels 2-5 on tanned skin or after
recent sun exposure (including articial tanning
machines). Refer to section 6.1.
K
Do not expose treated areas to the sun.
E
Never use around or near the eyes. The device emits
infra-red (IR) light and may cause damage.

5
ENEN
E
Do not use on areas with injected lls or toxins.
E
Do not treat on tattoos or permanent makeup, dark
brown or black spots (such as large freckles, moles, or
warts), nipples, genitals, or lips.
E
Do not treat on active eczema, psoriasis, lesions, open
wounds or infections (cold sores), abnormal skin
conditions caused by systemic or metabolic diseases
(diabetes for example).
E
Do not treat on an area that has a history of herpes
outbreaks.
E
Do not use if you are pregnant or nursing.
E
Do not treat on areas where you may want hair to
grow.The results are permanent.
E
Do not treat the same area of skin more than once per
hair removal session.
E
Stop use immediately if you see full redness of the skin,
or if your skin blisters or burns.
E
Use a lower energy level if you experience any discom-
fort.
E
Keep the AC/DC adapter accessible at all times so
it can be removed from the socket easily in case of
emergency.
A
Keep your device away from water! Do not use near
bathtubs, showers, basins or other vessels containing
water. Do not place or store the device where it can fall,
be pushed or placed anywhere near water. There is a
risk of electrocution. Unplug immediately.

6
ENEN
E
Never leave the device unattended when plugged
into an outlet. Keep the AC/DC adapter accessible at
all times, so it can be removed from the socket easily in
case of emergency.
E
Do not attempt to open or repair your Silk'n Jewel
device. You may expose yourself to dangerous
electrical components or pulsed light energy.You may
cause serious harm to yourself and you will void your
warranty.
4. Do not use Silk'n Jewel if:
The plug, attachments or accessories are not recommended by
Home Skinovations Ltd.
The device has a damaged cord or plug. Keep the power cord
away from heated surfaces.
You see or smell smoke when it is in use.
The device is not working properly, or it appears to be damaged.
The skin colour sensor is cracked or broken.
The device casing is cracked or coming apart.
In such cases, contact Silk'n™ Customer Service.
5. Consult your physician before use if you have:
A history of kelodial scar formation.
Epilepsy.
A disease related to photosensitivity, such as porphyria,
polymorphic light eruption, solar urticaria, lupus, etc.
A history of skin cancer or areas of potential skin malignancies.

7
ENEN
Received radiation therapy or chemotherapy treatments within
the past 3 months.
Used physician-prescribed drugs on your skin within the past 6
months.
Any other condition which, in your physician’s opinion, would
make it unsafe for you to be treated.
6. Safety tips
This section has information to help you use your device safely.
6.1 Exposure to the sun
The lowest energy level (1) is designed for safe use even after sun
exposure.
If you use energy levels 2-5, avoid further exposure to the sun
for 4 weeks before and 2 weeks after your treatment. This is
because higher quantities of melanin expose the skin to greater
risk when using any method of light-based hair removal. This
applies to all skin types, even those that don't seem to tan
quickly.
To protect recently treated skin when exposed to sunlight, be
sure to thoroughly apply sunscreen SPF 30 or higher, for 2 weeks
after each hair removal session.
6.2 Exposure of pulse light to the eyes
Although you can use the device to treat facial hair, take extra
care to avoid contact with the eyes.
ENever use around or near the eyes. The device emits infra-red (IR) light
and may cause damage.
6.3 Wounds or infections
Wait for the aected area to heal before further use.

8
ENEN
7. Possible side eects
If you follow the instructions fully and pay attention to all warnings and
contraindications, complications and side eects are uncommon. However
every cosmetic procedure, including those designed for home use, involves
some degree of risk.Therefore, it is important that you understand and accept
the risks and complications that may occur with pulsed light hair removal
systems designed for home use.
Adverse reaction Risk
Minor skin discomfort
Home pulsed light hair removal is generally well-tolerated. However,
some users feel mild discomfort during use. This is best described
as a mild stinging sensation on the treated skin areas. The stinging
sensation may last during or after treatment.
Anything beyond this minor discomfort is abnormal. This
means that either you should stop using Silk'n Jewel because
you are unable to tolerate the hair removal application, or
that the energy level setting is too high.
Minor
Skin redness
Your skin may become red immediately after using the device or
within 24 hours. Redness generally clears up within 24 hours.
See your doctor if redness does not go away within 2 to 3
days.
Make sure you use the energy level that is comfortable for you and
suitable for your skin colour.
Minor
Increased sensitivity of the skin
The skin of the treated area is more sensitive so you may encounter
dryness or aking of the skin.
Minor

9
ENEN
Adverse reaction Risk
Pigment changes
Silk'n Jewel targets the hair shaft, in particular the pigmented cells
in the hair follicle and the hair follicle itself. Nevertheless there is
a risk of temporary hyperpigmentation (increased pigment or
brown discolouration) or hypo-pigmentation (whitening) to the
surrounding skin. Risk of changes in skin pigmentation is higher
for people with darker skin tones or heavily tanned skin. Usually
discolouration or changes to skin pigment are temporary, and
permanent hyperpigmentation or hypo-pigmentation are rare.
Rare
Excessive redness and swelling
In rare cases, treated skin may become very red and swollen. This
is more common in sensitive areas of the body. The redness and
swelling should subside within 2 to 7 days and should be treated
with frequent applications of ice. Gentle cleansing is OK, but avoid
exposure to the sun.
Rare
Blisters or burns
Stop use immediately! Cool the aected area and apply anti-burn
cream. Wait until the area has healed completely before another
treatment, and use a lower energy level. If the skin does not return
to normal within 3 days, consult your physician.
Rare
8. Long-term hair removal the Silk'n™ way
The eciency of hair removal varies from person to person according to body
area, hair colour, and how Silk'n Jewel is used. A typical full hair growth cycle
may take 18-24 months. During this time, multiple treatment sessions are
required to achieve permanent hair removal.
A typical Silk'n Jewel hair removal plan during a full hair growth cycle includes:
Treatments 1-4: Plan two weeks apart.
Treatments 5-7: Plan four weeks apart.
Treatments 8 +: Treat as needed, until desired results are achieved.

10
ENEN
8.1 Expected treatment outcomes
Individual response depends on hair type as well as biological factors that may
aect hair growth patterns. Some users may respond quicker or slower than
the average number of treatments.
Skin Type1Body Hair2
Light
Fluence
[J/cm2]
Part of the
Body
Average
Treatment
Time
Eectiveness
of Hair
Removal
1-5
Dark
blonde to
brown
2.5-4
Lower or upper
legs 60%
Arms Session 10-
12, approx.
4 weeks
apart.
50%
Bikini line 60%
Underarms 55%
1-5 Brown to
black 2.5-4
Lower or upper
legs Sessions
8-10 approx.
4 weeks
apart.
70%
Arms 60%
Bikini line 70%
Underarms 65%
1 Skin types are based on the Fitzpatrick scale of skin colours. Refer to the skin
colour chart at the front of this manual.
2 Not eective on white body hair.
8.2 Energy levels
The energy level determines the intensity of the light pulse delivered to your
skin. As the energy level increases, so do hair removal results, as well as the risk
of possible side eects and complications.
The device has 5 levels of energy from 1 (the lowest) to 5 (the highest), repre-
sented by 5 energy level indicator lights (#2 in the diagram).

11
ENEN
When the device is turned on, the energy level is set to level 1 automatically.
Only one energy level indicator light will be on.
To change the energy level, press the control button (#3 in the diagram) repeat-
edly to increase the energy level from 1 to 5. Once at level 5, press the control
button again to reduce the energy level from 5 back to 1.
M
To determine the right energy level for your treatment area, refer
to section "9.1 Before your rst treatment".
8.3 Pulsing and gliding
Pulsing is the best technique for working at higher energy levels.
Work in rows (either across or down as shown in the image). Start at one end
of each row and progress to the other end. Press the treatment surface against
your skin.The treatment surface creates temporary pressure marks on the treat-
ed area so you can see areas you have treated. After each pulse, move the treat-
ment surface to the next area. Keep doing this pulsing action for the area you
are treating. Avoid gaps or overlaps between areas.
EDo not treat the same area of skin more than once per hair removal
session.
Gliding is the best technique for working at lower energy levels.
Press the device rmly against your skin and slowly glide over your skin (either
across or down as shown in the image). Make sure that the skin is always touch-
ing the device. At lower energy levels, the device takes only 1-1.5 seconds to
recharge between pulses.This generates a nonstop sequence of ashes. Glide
at a speed so that you avoid gaps or overlaps.
EStop use immediately if your skin blisters or burns.

12
ENEN
8.4 The skin colour sensor
Light-based hair removal on darker skin tones may result in adverse eects
such as burns, blisters, and skin colour changes (hyper- or hypo-pigmenta-
tion). Your Silk'n Jewel has a skin colour sensor that detects the colour of your
skin automatically (#7 in the diagram). If your skin tone is too dark for safe
use, the device will not operate, and the skin colour sensor light will
blink (#5 in the diagram).
8.5 What to expect when treating with Silk’n
For many people, using Silk'n Jewel may be their rst experience with a light-
based device. During a treatment session it is normal to experience or feel:
Noise: The cooling fan makes noise similar to a hair dryer. This is
normal.
A popping sound: With each ash of HPL™ light.
A sensation of warmth and tingling: During each light pulse.
Some redness: It is not uncommon to see some very mild,
pink-like skin colouration during or just after a treatment. This is
usually most noticeable around the hairs themselves.
EStop use immediately if you see full redness of the skin.
9. Get started
To use your Silk'n Jewel, follow these steps:
1. Remove the device and other components from box.
2. Plug the adapter cord into the device socket (#1 in the diagram) and
plug the adapter into an electrical outlet. All energy level indicator
lights will turn on, and then go o.

13
ENEN
9.1 Before your rst treatment
You must decide which energy level is right for your skin and the area you want
to treat. The device has 5 levels of energy from 1 (the lowest) to 5 (the highest).
To choose the right energy level, test each treatment area separately (refer to
the skin colour chart at the front of this manual).
1. Press the control button to turn on the device. The level 1 energy level
indicator light will go on.
2. Place the treatment surface (#6 in the diagram) on your skin to deliver
one pulse. If you do not experience abnormal discomfort press the
control button again. This will increase the energy level. Deliver one
pulse on a dierent spot at energy level 2.
3. Continue testing at increased energy levels. Use the energy levels
indicated on the skin colour chart. If you do not experience any adverse
eects within one hour, you can start your full treatment at that energy
level.
EUse a lower energy level if you experience any discomfort.
Repeat this test for each part of the body you wish to treat.
You are now ready to use your Silk'n Jewel
1. Before treating an area, the skin should be shaved, clean, dry and free
of any powders, antiperspirants or deodorants. Do not wax, pluck or
tweeze the hair out.
2. Press the controlbutton.The device will turn on, the level 1energyindica-
tor light will be on, and a fan sound will start.
3. Approximately 1 second after pressing the controlbutton, the readylight
will turn on (#4 in the diagram). The device is then ready to use at the
lowest energy level.
4. Set the energy level. Press the control button repeatedly to increase
the energy level until you have the level you want. The energy level
indicator lights indicate the energy level setting (refer to section "8.2
Energy levels").
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to
section "8.3 Pulsing and gliding").

14
ENEN
6. Apply the treatment surface to the skin (#6 in the diagram). Make
sure that the skin is spread evenly and smoothly. When the treatment
surface is in full contact with the skin, the ready light will start blinking
slowly.
7. The device will rst determine the colour of your skin automatically
and it will ash a pulse of light onto your skin.You will feel a mild sensa-
tion of warmth and tingling, and you may hear a popping sound.
MThe device will not operate if your skin tone is too dark for safe
use.
MIf you are pulsing, remove the device from your skin. The device
will immediately recharge for the next pulse. After a few seconds
(depending on the energy level) the ready light will turn on
again, and start blinking slowly when pressed against the skin.
8. If youarepulsing,repeatthe process. If you aregliding,simplycontinue.
9. Continue to pulse or glide until you have treated the area fully.
EStop use immediately, if your skin blisters or burns.
10. After treatment
When you have nished your treatment session:
1. Turn the device o by giving the control button an extended press.
Remember the last energy level setting you used, because it will not
be restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.

15
ENEN
11. Maintenance
It is important to clean your Silk'n Jewel device after each treatment. To clean
the device:
LUnplug the device.
LUse a dry, clean cloth and a specially formulated cleaning
detergent for electronic equipment to gently wipe the surface,
including the treatment surface.
LAfter cleaning, we recommend you store the device in its original
box.
ENever immerse your Silk'n Jewel or any of its parts in water.
12. Troubleshooting
Do not attempt to open or repair your Silk'n Jewel. You may exposure
yourself to dangerous electrical components or pulsed light energy.
You may cause serious harm to yourself and you will void your warranty.
Problem Checks
My Silk'n Jewel does
not start.
Make sure the adapter is properly connected to the
device and that it is plugged into an electrical outlet
on the wall.
There is no light pulse
when the device
touches my skin.
Check that the device is connected and the ready
light is on. Make sure that the treatment surface is
evenly and rmly pressed to the skin.
It is also possible that your skin colour is too dark.
The skin colour sensor
light and the ready light
blink.
The skin colour is too dark.
One or more lights
blink. The device has malfunctioned.
For problems or queries, please contact Silk'n™ Customer Service.

16
ENEN
13. Customer service
See our website for more information: www.silkn.eu. This manual is also
available as a PDF download from: www.silkn.eu. Contact Customer Service
to report unexpected operations or events, or any other problem with your
device. Our contact details are:
Country Service number Email
Belgium 0900-25006 [e-mail]
France 0891-655557 [e-mail]
Germany 089 51 23 44 23 [e-mail]
Italy [e-mail]
Netherlands 0900-2502217 klantenser[email protected]
Spain 807088200 [e-mail]
UK 0906-2130009 [e-mail]
Other countries [phone] [email protected]
14. Warranty
Refer to your Silk'n™ warranty card.
15. Disposal
N
Help protect the environment. Dispose of packaging at a recycling point
that sorts materials by type. If your device reaches its End of Life stage, be
sure to follow your country's laws for the disposal of electrical items.

17
ENEN
16. Specications
Model no. H3210 / H3211
Spot size 0.9cm x 3cm [2.7cm²]
Technology Home Pulsed Light
Maximum energy level Max 4J/cm²
Wavelength 475-1200nm
Operation & safety Skin Colour Sensor ensures use only on
appropriate skin types.
Package size 180x180x100 mm
System weight 200 gm
Transport & storage between uses
and storage condition
Temperature: minus 40° - 70°C
Relative humidity : 10% - 90%
Atmospheric pressure: 500 - 1060 hPa
Operating conditions
Temperature: 10° - 35°C
Relative humidity : 15% - 90%
Atmospheric pressure: 700 - 1060 hPa
Time from minimum storage
temperature between uses to
minimum operating temperature
with ambient temperature of 20°C
degrees
30 minutes
Time from maximum storage
temperature between uses to
maximum operating temperature
with ambient temperature of 20°C
degrees
30 minutes
Mode of operation Continuous

EN
18
Adapter models and rating
KSA24A1200150Hz
PSM18x-120L6HS
KSAPV0361200300D5
PMA36R-120
For x and z- refer to the country / region
100-240 VAC, 50-60 Hz, 1.2A max
This device was tested and
complies with
IEC 60601-1 (Safety)
IEC 60601-1-2 (EMC)
IEC60601-2-57 (Safety of non-laser source)
Expected service life of the
equipment 5 years
17. Signs and symbols
Products marked with this symbol full the requirements of the
EU directives.
Class II. The adapter is protected against electric shock by means
of double insulation.
Switch mode power supply unit.
For indoor use only.
Contains a failsafe transformer.
VI
Adapter energy eciency level 6.
IP30 The device is protected against the ingress of objects larger than
2.5mm diameter, such as ngers, to protect against electric shock.
Do not use in wet environments.
Do not dispose with household waste. Dispose in accordance
with your country's laws and help protect the environment.