Silvercrest SSBS 3.0 A1 User manual

BLUETOOTH®-SELFIE STICK SSBS 3.0 A1
IAN 313587
BLUETOOTH®SELFIE STICK
Operating instructions
SELFIESTICK MED BLUETOOTH®
Betjeningsvejledning
BLUETOOTH®-SELFIESTICK
Gebruiksaanwijzing
PERCHE À SELFIE BLUETOOTH®
Mode d‘emploi
BLUETOOTH®- SELFIE - STICK
Bedienungsanleitung

GB/IE/NI Operating instructions Page 1
DK Betjeningsvejledning Side 17
FR/BE Mode d’emploi Page 33
NL/BE Gebruiksaanwijzing Pagina 51
DE/AT/CH Bedienungsanleitung Seite 69
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the device.
Før du læser, vend siden med billeder frem og bliv bekendt med alle
apparatets funktioner.
Avant de lire le mode d’emploi, ouvrez la page contenant les
illustrations et familiarisez-vous ensuite avec toutes les fonctions de
l’appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak
u vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und
machen Sie sich anschließend mit allen Funktionen des Gerätes
vertraut.

Quick
Start
Guide

SSBS 3.0 A1 GB│IE│NI │ 1 ■
Contents
Introduction...............................2
Information about these operating instructions............2
Notes on trademarks ...............................2
Proper use .......................................2
Warnings and symbols used .........................3
Safety ...................................4
Notes on the radio interface .........................5
Safety instructions for batteries........................5
Description of components ..................7
Setup....................................7
Check package contents ............................7
Disposal of the packaging ...........................8
Inserting/replacing the battery........................8
Handling and operation.....................9
Establishing a connection to a smartphone ..............9
Attaching a smartphone to the selfie stick ..............10
Taking selfies ....................................11
Using the mini tripod ..............................11
Troubleshooting ..........................12
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Storage when not in use ...................13
Disposal.................................13
Appendix................................14
Technical data ...................................14
Notes on the EU Declaration of Conformity.............14
Kompernass Handels GmbH warranty ................15
Service .........................................16
Importer........................................16

SSBS 3.0 A1
■ 2 │ GB│IE│NI
Introduction
Information about these operating instructions
Congratulations on purchasing your new product. You have
selected a high-quality product. The operating instructions are
part of this product. They contain important information on
safety, usage and disposal. Before using the product, please
familiarise yourself with all operating and safety instructions. Use
the product only as described and for the range of applications
specified. Retain these operating instructions for future reference.
Please also pass these operating instructions on to any future
owner.
Notes on trademarks
The Bluetooth®logotype and Bluetooth®logo are regis-
tered trademarks of Bluetooth SIG, Inc. (Special Interest Group).
Any use of the trademarks by Kompernaß Handels GmbH is
made under the provisions of a licence.
The SilverCrest trademark and the retail name are the property
of their respective owner.
All other names and products may be trademarks or registered
trademarks of their respective owner.
Proper use
This product is an information technology device and is intended
exclusively for the creation of selfies (self-portraits) by means of
a Bluetooth®capable smartphone. The mini tripod can be
screwed onto the ¼ inch thread on the underside of the handle,
allowing the product to be used as a stable tabletop tripod.
Using the detachable remote release, you can take pictures from
a distance of up to 10 meters. The appliance is not intended for
any other purpose nor for use beyond the scope described. The
product is not intended for use in commercial or industrial areas.
The manufacturer accepts no responsibility for damage caused
by failure to observe these instructions, improper use or repairs,
unauthorised modifications or the use of unapproved replace-
ment parts. The risk is borne solely by the user.

SSBS 3.0 A1 GB│IE│NI │ 3 ■
Warnings and symbols used
The following warnings are used in these operating instructions:
DANGER
A warning at this hazard level indicates a poten-
tially hazardous situation.
Failure to avoid this hazardous situation could result in serious
injuries or even death.
► Follow the instructions in this warning notice to avoid the
risk of serious injuries or death.
WARNING
A warning at this hazard level indicates a poten-
tially hazardous situation.
Failure to avoid this hazardous situation could result in injury.
► Follow the instructions in this warning label to prevent
injury.
CAUTION
A warning at this hazard level indicates a risk of
property damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning label to prevent
property damage.
NOTE
► A note provides additional information to help you handle
the product.
This symbol on the product indicates that the contents
of the operating instructions should be observed.

SSBS 3.0 A1
■ 4 │ GB│IE│NI
Safety
This section contains important safety instructions for using the
product. Improper use may result in personal injury and property
damage.
■ Prior to use, check the product for visible external damage.
Do not operate a product that has been damaged or
dropped.
■ This product may be used by children aged 8 years and
above and by persons with limited physical, sensory or
mental capabilities or lack of experience and knowledge,
provided that they are under supervision or have been told
how to use the product safely and are aware of the potential
risks. Do not allow children to play with the product. Clean-
ing and user maintenance tasks must not be carried out by
children unless they are supervised.
■ DANGER! Do not allow children to play with the pack-
aging material! Keep all packaging materials away from
children. There is a risk of suffocation!
■ Ensure that all components of the product are firmly at-
tached when using the product.
■ Do not perform any modifications or changes to the product
yourself.
■ Do not operate the product in the vicinity of heat sources
such as radiators or other heat-generating appliances.
■ Do not expose the product to direct sunlight or high tempera-
tures. Otherwise, it may overheat and be irreparably
damaged.
■ Keep open flames (e.g. candles) away from the product at
all times.
■ Protect the product from moisture and liquids.
■ Do not immerse the product in water or other liquids!

SSBS 3.0 A1 GB│IE│NI │ 5 ■
Notes on the radio interface
■ Keep the product at least 20 cm away from a pacemaker or
implanted defibrillator, as radio waves could affect the proper
functioning of the pacemaker or implanted defibrillator.
■ The transmitted radio waves can cause noise interference in
hearing aids.
■ Do not use the product with the radio component switched
on in the vicinity of flammable gases or in a potentially
explosive environment (e.g. paint shop), as the transmitted
radio waves can trigger an explosion or fire.
■ The range of the radio waves is dependent on the environ-
ment and the ambient conditions.
Safety instructions for batteries
In order to handle batteries safely, please observe the following
safety instructions:
■ WARNING! Mishandling batteries can cause fires,
explosions, leakage of dangerous substances or other
hazards!
■ This product contains a button cell. If this button cell is swal-
lowed, it can lead to serious internal burns within 2 hours
that can lead to death.
■ Keep batteries out of the reach of children. Children can put
batteries into their mouth and swallow them. If you suspect
batteries may have been swallowed or inserted into any
part of the body, seek immediate medical help.
■ Keep old and new batteries out of the reach of children.
■ Do not throw batteries into a fire and do not subject them to
high temperatures.

SSBS 3.0 A1
■ 6 │ GB│IE│NI
■ Do not open, deform or short-circuit batteries, since this can
lead to chemical leakage.
■ Do not attempt to recharge the battery.
■ Check the condition of the battery regularly. Leaking chem-
icals can cause permanent damage to the product. Take par-
ticular care when handling damaged or leaking batteries.
Risk of acid burns! Wear protective gloves.
■ Chemicals that leak from a battery can cause skin irritation.
In event of contact with your skin, rinse off with plenty of wa-
ter. If the chemicals get into your eyes, rinse them thoroughly
with water, do not rub and consult a doctor immediately.
■ Always insert the batteries the right way round (observe
correct polarity) otherwise there is a risk that they could
explode.
■ If the battery compartment does not close securely, stop
using the product and keep it away from children.
■ If you do not intend to use the product for a long time,
remove the battery.

SSBS 3.0 A1 GB│IE│NI │ 7 ■
Description of components
(See fold-out page for illustrations)
Mini tripod
Smartphone holder
Locking screw
Telescopic shaft
Handle
Wrist strap
¼ inch thread (underside)
Remote release
button (ON/OFF button)
Operating LED (orange/blue)
-button (shutter release button)
3Battery compartment cover
!button (Bluetooth®)
.Remote release holder
Set up
Check package contents
(see fold-out page for illustrations)
The following components are included in delivery:
ƔSelfie stick
ƔRemote release
ƔRemote release holder
ƔMini tripod
ƔButton cell CR 2032
ƔQuick start guide
ƔThese operating instructions
♦ Unpack all parts of the product from the packaging and
remove all packaging materials.
NOTE
► Check the package for completeness and signs of visible
damage.
► If the contents are incomplete or damaged due to defective
packaging or through transportation, contact the Service
Hotline.

SSBS 3.0 A1
■ 8 │ GB│IE│NI
Disposal of the packaging
The packaging materials have been selected
for their environmental friendliness and ease of
disposal, and are therefore recyclable. Dispose of
packaging materials that are no longer needed in
accordance with applicable local regulations.
Dispose of the packaging in an environmentally
friendly manner.
Note the labelling on the packaging and separate
the packaging material components for disposal if
necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the
following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Inserting/replacing the battery
♦ Open the battery compartment on the rear of the remote
release. To do this, turn the battery compartment cover 3,
e.g. with a coin, in the direction of the arrow OPEN until the
arrow on the battery compartment cover3points to the
open lock symbol .
♦ Insert a CR 2032 battery into the battery compartment.
The positive terminal should face upwards.
♦ Replace the battery compartment cover3on the back of
the remote releaseand lock the battery compartment.
To do this, turn the battery compartment cover3in the
direction of the arrow CLOSE until the arrow on the battery
compartment cover3points to the closed lock symbol .
NOTE
► If the operating LED flashes orange every second, the
battery is depleted and must be replaced.

SSBS 3.0 A1 GB│IE│NI │ 9 ■
Handling and operation
Establishing a connection to a smartphone
Before you can use the selfie stick, you must first pair the remote
releasewith a compatible smartphone via Bluetooth®.
NOTE
► This product supports the operating systems iOS 8.0
or higher and Android 5.0 or higher. As Android is an
open-source system, each manufacturer determines the
key assignment of its camera app themselves. On some
smartphones no image can be triggered with the original
camera app, and there may be various malfunctions when
pressing the button-. In this case, check the settings
of the operating system to see whether the settings offer an
option for setting the volume control (+) as an additional
trigger button.
♦ Press and hold the buttonfor about 3 seconds to
switch on the remote release. The operating LEDlights
up orange once and then flashes blue every second. The
remote releaseis now in pairing mode for approx.
1 minute. If you do not make the pairing within 1 minute,
the remote releaseswitches off automatically.
♦ Activate the Bluetooth®function on your smartphone and
search for Bluetooth®devices. You can find a detailed
description of how to do this in the operating instructions for
your smartphone.
♦ Select the entry SSBS 3.0 A1 from the list of found devices
on your smartphone to pair the two devices. If the connec-
tion is successful, the operating LEDgoes out.
♦ To switch off the remote release, press and hold the
buttonfor approx. 3 seconds. The operating LEDbriefly
flashes orange three times before going out completely.

SSBS 3.0 A1
■ 10 │ GB│IE│NI
NOTE
► The next time you switch on the device, the remote
releasewill connect automatically to the last-connected
smartphone. If your smartphone does not automatically
connect to the remote release, you must establish the
connection manually. You can find a detailed description
of how to do this in the operating instructions for your
smartphone.
► If you want to connect another smartphone to the remote
release, press and hold the button!for about
2 seconds. The operating LED briefly flashes blue twice
and then continues to flash every second. The remote
releaseis now in pairing mode for about 1 minute and
can now be connected to another smartphone.
Attaching a smartphone to the selfie stick
♦ Pull the clamps of the smartphone holderopen.
♦ Place the smartphone between the clamps of the smart-
phone holderby pushing the upper clamp upwards
against the spring force. Check that your smartphone is
securely in place.
♦ Loosen the locking screwand adjust the vertical tilt angle
of the smartphone. Fix the smartphone in the desired posi-
tion by re-tightening the locking screw.
♦ If necessary, attach the remote releaseto the lower part of
the telescopic shaftusing the remote release holder..

SSBS 3.0 A1 GB│IE│NI │ 11 ■
Taking selfies
♦ Release the lock of the telescopic shaftby turning it
anticlockwise.
♦ Pull out the telescopic shaftto the desired length. Turn the
individual elements of the telescopic shaftclockwise to
lock them in place.
♦ If you want to unlock the telescope shaftagain, turn the
individual elements in the opposite direction (anticlockwise).
♦ Switch on the camera function on your smartphone.
♦ Press the button-on the remote release. Your
smartphone will take a picture. The operating LEDbriefly
flashes blue once.
NOTE
► If the button-is not pressed for approx. 6 minutes, the
remote releaseswitches off automatically.
Using the mini tripod
♦ Screw the mini tripodinto the ¼ inch threadon the
bottom of the handle.
♦ Always pull the legs of the mini tripodfully apart for
maximal stability.

SSBS 3.0 A1
■ 12 │ GB│IE│NI
Troubleshooting
The remote releasewill not switch on.
► The battery is empty. Replace the battery (see section
Inserting/replacing the battery).
The Bluetooth®connection cannot be established.
► The Bluetooth®function on the smartphone is not activated.
Activate the Bluetooth®function on your smartphone.
Please refer to its operating instructions for more information.
► The distance between the remote releaseand the smart-
phone is too big. Make sure that the remote releaseis no
more than 10 meters away from the smartphone.
► Your smartphone may be using an unsupported operating
system. Check the version of the operating system on your
smartphone (for supported operating systems, see section
Technical data).
No image is captures when the button-is pressed.
► Each manufacturer determines the key assignment of their
camera app themselves. Therefore, various malfunctions may
occur when the button-is pressed, e.g. camera zooms
in instead of taking a picture. In this case, check the settings
of the operating system to see whether thesettings offer an
option for setting the volume control (+) as an additional
trigger button.
The operating LEDflashes orange every second.
► The battery in the remote releaseis empty and must be
replaced (see section Inserting/replacing the battery).

SSBS 3.0 A1 GB│IE│NI │ 13 ■
Cleaning
CAUTION
► To avoid irreparable damage to the product, ensure that
no moisture gets into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning
materials. These can damage the surfaces of the product.
♦ Clean the product with a lightly moistened cloth and a mild
detergent only.
Storage when not in use
♦ Store the product in a dry, dust-free location out of direct
sunlight.
♦ For prolonged storage, the battery should be removed to
prevent battery leakage.
Disposal
The adjacent symbol of a crossed-out wheelie bin
means that this product is subject to Directive
2012/19/EU. This directive states that the product
may not be disposed of in normal household waste
at the end of its useful life, but must be taken to a specially set-up
collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect
the environment and dispose of this device properly.
Your local community or municipal authorities can
provide information on how to dispose of the
worn-out product.
Batteries should not be disposed of with normal
household waste. Consumers are legally obliged to
dispose of used batteries at a collection point in
their town/district or at a retail store. This obligation
serves to ensure that batteries are disposed of in an environmen-
tally sound manner. They may contain poisonous heavy metals
and must be disposed of in accordance with the rules for the
treatment of hazardous waste. The chemical symbols for heavy
metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead.
Only hand in batteries that are fully discharged.

SSBS 3.0 A1
■ 14 │ GB│IE│NI
Appendix
Technical data
REMOTE RELEASE
Power supply 1 x 3V (DC)
Type CR 2032 (button cell)
Bluetooth®specifications Version 4.2
(range up to 10m)
Frequency band 2.4 GHz
Transmission output <10dBm
Supported operating systems iOS 8.0 or higher/
Android 5.0 or higher
Operating temperature 5°C–35°C
Storage temperature 0°C–40°C
Relative humidity
(no condensation)
≤ 75%
Weight approx. 24g
SELFIE STICK
Clamping range approx. 56–80mm
Max. load approx. 500g
Length approx. 30–100cm
Weight approx. 150g
MINI TRIPOD
Max. load 1kg
Weight approx. 120g
Notes on the EU Declaration of Conformity
This product complies with the essential requirements and other
relevant provisions of the RE Directive 2014/53/EU and the
RoHS Directive 2011/65/EU.
You can download the complete EU conformity declaration
from www.kompernass.com/support/313587_DOC.pdf.

SSBS 3.0 A1 GB│IE│NI │ 15 ■
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of pur-
chase. If this product has any faults, you, the buyer, have certain
statutory rights. Your statutory rights are not restricted in any way
by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of pur-
chase. Please keep your original receipt in a safe place. This
document will be required as proof of purchase.
If any material or production fault occurs within three years of the date
of purchase of the product, we will either repair or replace the product
for you at our discretion. This warranty service is dependent on you
presenting the defective appliance and the proof of purchase (receipt)
and a short written description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product will either
be repaired or replaced by us. The repair or replacement of a
product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under
the warranty. This also applies to replaced and repaired compo-
nents. Any damage and defects present at the time of purchase
must be reported immediately after unpacking. Repairs carried
out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict
quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The
warranty does not extend to product parts subject to normal
wear and tear or fragile parts such as switches, batteries, baking
moulds or parts made of glass.
The warranty does not apply if the product has been damaged, im-
properly used or improperly maintained. The directions in the operat-
ing instructions for the product regarding proper use of the product are
to be strictly followed. Uses and actions that are discouraged in the
operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for com-
mercial purposes. The warranty shall be deemed void in cases of
misuse or improper handling, use of force and modifications/re-
pairs which have not been carried out by one of our authorised
Service centres.

SSBS 3.0 A1
■ 16 │ GB│IE│NI
Warranty claim procedure
To ensure quick processing of your case, please observe the
following instructions:
■ Please have the till receipt and the item number (e.g. IAN
12345) available as proof of purchase.
■ You will find the item number on the type plate, an engrav-
ing on the front page of the instructions (bottom left), or as a
sticker on the rear or bottom of the appliance.
■ If functional or other defects occur, please contact the ser-
vice department listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to
the service address that will be provided to you. Ensure that
you enclose the proof of purchase (till receipt) and informa-
tion about what the defect is and when it occurred.
You can download these instructions along with many
other manuals, product videos and software on
www.lidl-service.com.
Service
Service Great Britain
Tel.: [phone]
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
IAN 313587
Importer
Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com

SSBS 3.0 A1 DK │ 17 ■
Indholdsfortegnelse
Introduktion .............................18
Informationer om denne betjeningsvejledning ...........18
Information om varemærker .........................18
Anvendelsesområde...............................18
Anvendte advarsler og symboler .....................19
Sikkerhed ...............................20
Informationer om det trådløse interface ................21
Sikkerhedsanvisninger for batterier ...................21
Beskrivelse af delene ......................23
Første anvendelse.........................23
Kontrol af de leverede dele .........................23
Bortskaffelse af emballagen.........................24
Indsætning/udskiftning af batteriet ...................24
Betjening og funktion......................25
Etablering af forbindelse med en smartphone ...........25
Fastgøring af smartphone på selfiestangen .............26
Optagelse af selfie-fotos............................27
Anvendelse af ministativ ............................27
Fejlsøgning ..............................28
Rengøring ...............................29
Opbevaring når produktet ikke anvendes ....29
Bortskaffelse.............................29
Tillæg ...................................30
Tekniske data ....................................30
Info om EU-overensstemmelseserklæringen .............30
Garanti for Kompernass Handels GmbH...............31
Service .........................................32
Importør........................................32