Silvercrest SLS 3 A1 User manual

IAN 307266
LADY SHAVER SLS 3 A1
LADYSHAVER
Betjeningsvejledning
RASOIR POUR FEMME
Mode d’emploi
LADYSHAVER
Gebruiksaanwijzing
LADYSHAVER
Bedienungsanleitung
LADY SHAVER
Operating instructions

GB/IE/NI Operating instructions Page 1
DK Betjeningsvejledning Side 17
FR/BE Mode d’emploi Page 33
NL/BE Gebruiksaanwijzing Pagina 49
DE/AT/CH Bedienungsanleitung Seite 65
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the device.
Før du læser, vend siden med billeder frem og bliv bekendt med
alle apparatets funktioner.
Avant de lire le mode d’emploi, ouvrez la page contenant les
illustrations et familiarisez-vous ensuite avec toutes les fonctions de
l’appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en
maak u vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und
machen Sie sich anschließend mit allen Funktionen des Gerätes
vertraut.

GB│IE│NI │ 1 ■
SLS 3 A1
Introduction ...........................2
Intended use ..........................2
Package contents ......................2
Description of the appliance..............3
Technical data .........................3
Safety instructions......................4
Inserting/replacing the batteries..........6
Shaving ..............................7
For longer hair.........................8
Long-hair trimmer attachment ............9
Cleaning, care and maintenance ..........9
Cleaning with the cleaning brush................10
Cleaning under running water ..................11
Storage .............................11
Disposal .............................12
Kompernass Handels GmbH warranty....13
Service ....................................15
Importer ...................................15
Ordering replacement parts ............16
Contents

■ 2 │ GB│IE│NI SLS 3 A1
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. The operating
instructions are part of this product. They contain important
information on safety, usage and disposal. Before using
the product, familiarise yourself with all operating and
safety instructions. Use the product only as described and
for the specified areas of application. Please also pass on
these operating instructions to any future owner.
Intended use
This appliance is intended exclusively for shaving and
trimming human hair.
This appliance is intended solely for use in private house-
holds. Do not use it for commercial applications.
All other uses are deemed to be improper and may result
in property damage or even in personal injury.
This shave is designed for shaving armpits, legs and the
bikini area. The shaver can be used dry or in the shower.
Package contents
♦ Lady Shaver
♦ 2 batteries
♦ Long-hair trimmer attachment
♦ Storage bag
♦ Cleaning brush
♦ Operating instructions
NOTE
Check contents for completeness and damage
immediately after unpacking. Contact Customer
Services if necessary.

GB│IE│NI │ 3 ■
SLS 3 A1
Description of the appliance
1 Trimmer
2 Shaver unit
3 Shaving head
4 Release buttons
5 On/off switch with travel lock
6 Battery compartment
7 Battery compartment cover
8 Lock
9 Cleaning brush
0 Batteries
q Storage bag
w Long-hair trimmer attachment/protective cap
Technical data
Voltage supply 2 x 1.5 V (direct current)
Battery type 1.5 V, micro, AAA, LR03
Protection class III / (Protection through extra
low voltage)
Protection class IP X4 (protected against water
splashes)
The appliance is suitable for use in
a bath or shower.

■ 4 │ GB│IE│NI SLS 3 A1
Safety instructions
WARNING – RISK OF
INJURY!
► This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks.
► Children must not use the appliance
as a plaything.
► Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
► Do not throw batteries into a fire. Do
not recharge batteries. There is a risk
of explosion and injury!
► Never open batteries and never
solder or weld batteries. There is a
risk of explosion and injury!
► Check the condition of the batteries
at regular intervals. Leaking batteries
can cause damage to the appliance.

GB│IE│NI │ 5 ■
SLS 3 A1
WARNING – RISK OF
INJURY!
► If you do not intend to use the
appliance for an extended period,
remove the batteries.
► If the batteries have leaked, use
protective gloves. Clean the battery
compartment and the battery
contacts with a dry cloth.
► Keep batteries out of the reach of
children. Children might put batteries
into their mouth and swallow them. If
a battery is swallowed, medical as-
sistance must be sought immediately.
► All repairs must be carried out by
authorised specialist companies or
by the Customer Service depart-
ment. Improper repairs can pose
significant risks to the user. It will
also invalidate any warranty claims.
► Do not use the appliance with a
defective shaver unit or long hair
trimmer because these may have
sharp edges. There is a risk of injury!

■ 6 │ GB│IE│NI SLS 3 A1
CAUTION – PROPERTY DAMAGE!
► Never submerse the appliance in
water or other liquids.
► Defective components must always
be replaced with original replace-
ment parts. Compliance with safety
requirements can only be guaran-
teed if original replacement parts
are used.
Inserting/replacing the batteries
NOTE
► Always use 1.5 V, AAA type batteries.
► Pay attention to the correct polarity when inserting
the batteries 0.
1) Turn the lock 8a quarter turn.
2) Now pull off the battery compartment cover 7together
with the lock 8.
3) If inserted: Remove the discharged batteries 0from the
battery compartment 6.
4) Insert new batteries 0as shown in the polarity diagram
in the battery compartment 6.
5) Push the battery compartment cover 7back onto the
appliance and turn the lock 8back.
The battery compartment 6is now closed.

GB│IE│NI │ 7 ■
SLS 3 A1
Shaving
NOTE
► If your skin is sensitive or prone to allergic skin
reactions, try the shaver first on a small, unobtrusive
area.
1) Ensure the shaver unit 2is attached and locked in
place.
2) Press the travel lock, which is located on the on/off
switch 5and push the on/off switch 5towards the
shaver unit 2. The appliance starts.
The travel lock ensures that the appliance does not
start up accidentally, for example, when stowed away.
NOTE
► Before dry shaving, ensure that your skin is free of
cream or oil residue. Your skin should be clean and
dry.
3) Hold the shaver perpendicular to the skin and guide
the shaver unit 2in straight movements against the
direction of hair growth. Apply repeatedly. The small
rubber lip in front of the shaving head 3ensures that
the skin is pulled tight and also causes the hairs to
stand upright a little.
4) After you have covered all the areas you want to
shave, push the on/off switch 5back into its initial
position. The appliance stops.
5) Clean the shaver after every use with the supplied
cleaning brush 9. For a more thorough cleaning,
read the section “Cleaning, care and maintenance”.

■ 8 │ GB│IE│NI SLS 3 A1
NOTE
► This shaver is also suitable for use in the shower. Do
not, however, immerse the appliance in water. This
will cause irreparable damage to the appliance!
For longer hair
If you have not shaved for some time, for instance, on your
legs, you should use the trimmer 1before shaving as
described in the section “Shaving”.
1) Ensure the shaver unit 2is attached and locked in
place.
2) Press the travel lock and push the on/off switch 5
in the direction of the shaver unit 2. The appliance
starts.
NOTE
► Before dry shaving, ensure that your skin is free of
cream or oil residue. Your skin should be clean and
dry.
3) Hold the shaver so that the trimmer 1is pointing
towards your leg at a slight angle (approx. 45°).
Move the trimmer 1slowly against the direction of
hair growth.
4) After you have covered all the areas you want to
shave, push the on/off switch 5back into its initial
position. The appliance stops.
5) Clean the shaver after every use with the supplied
cleaning brush 9. For a more thorough cleaning, read
the section “Cleaning, care and maintenance”.

GB│IE│NI │ 9 ■
SLS 3 A1
Long-hair trimmer attachment
If you do not want to completely shave off the hair or
merely want to trim your bikini line, use the long-hair
trimmer attachment w.
1) Push the long-hair trimmer attachment wonto the
shaver unit 2and press it down so that the long-hair
trimmer attachment wclicks into place. Ensure that the
open grooves lie over the trimmer 1.
2) Press the travel lock and push the on/off switch 5
in the direction of the shaver unit 2. The appliance
starts.
3) Move the appliance with straight motions over the
skin. Apply repeatedly and guide the shaver against
the direction of hair growth.
4) After you have covered all the areas you want to
shave, push the on/off switch 5back into its initial
position. The appliance stops.
5) Clean the long-hair trimmer attachment wwith the
supplied cleaning brush 9. For a more thorough
cleaning, read the section “Cleaning, care and
maintenance”.
Cleaning, care and maintenance
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning
agents to clean this appliance. This will irreparably
damage the appliance.
NOTE
► As soon as the shave becomes noticeably worse, we
recommend replacing the shaver unit 2.
To order a new shaver unit 2, please contact the
service department (see section “Ordering replace-
ment parts”). Have the IAN number of the item to
hand. You will find this on the front page of these
operating instructions or in the section “Service”.

■ 10 │ GB│IE│NI SLS 3 A1
Cleaning with the cleaning brush
Shaving head/shaver unit
Clean the shaving head 3under the shaver unit 2with
the cleaning brush 9.
1) Press the two release buttons 4and pull the shaver
unit 2upwards off the appliance.
2) Tap the shaver unit 2on a flat surface and blow
off the hair cuttings. Use the cleaning brush 9if
necessary. Blow loose hair from the shaving foils.
3) Use the cleaning brush 9to clean the shaving
head 3.
Trimmer
■ Clean the trimmer 1after every use with the supplied
cleaning brush 9.
■ Oil the trimmer 1roughly every 6 months with a drop
of sewing machine oil:
■ Turn on the shaver for a short while to distribute the oil
on the blades.
Long-hair trimmer attachment
■ Rinse the long-hair trimmer attachment wunder
running water.
Housing
■ Clean the housing with a moist cloth.

GB│IE│NI │ 11 ■
SLS 3 A1
Cleaning under running water
1) Press the two release buttons 4and pull the shaver
unit 2upwards off the appliance.
2) Hold the shaving head 3under running water.
Make sure that you hold the appliance so that the
shaving head 3is angled downwards. This allows
the water to drain off and prevents it from getting into
the appliance.
CAUTION! MATERIAL DAMAGE!
Hold only the shaving head 3under running water.
The shaver handset can be damaged irreparably if it
is held under running water.
3) Allow the shaving head 3to dry.
4) Replace the shaver unit 2on the shaver. Ensure that
it snaps into place and is seated firmly.
Storage
■ Always replace the long-hair trimmer attachment w
onto the shaver unit 2when you are not using the
appliance. This protects the shaver unit 2.
■ Store the cleaned and dried appliance and its
accessories in the supplied storage bag q.
■ Store everything in a clean, dust-free and dry place.

■ 12 │ GB│IE│NI SLS 3 A1
Disposal
Do not dispose of the appliance in
your normal domestic waste. This
product is subject to the provisions
of European Directive 2012/19/EU.
Dispose of the appliance via an approved waste disposal
company or your municipal waste disposal facility. Please
comply with all applicable regulations. Please contact your
waste disposal facility if you are in any doubt.
Your local community or municipal authorities
can provide information on how to dispose of
the worn-out product.
Used batteries may not be disposed of in
household waste. Consumers are legally
obliged to dispose of (rechargeable) batteries
at a collection point in their community/city
district or at a retail store. The purpose of this
requirement is to ensure that batteries are
disposed of in an environmentally friendly
manner. Only dispose of batteries when they
are fully discharged.
The packaging is made of environmentally
friendly materials which you can dispose of at
your local recycling centre.
Dispose of the packaging in an environmentally
friendly manner. Note the labelling on the
packaging and separate the packaging
material components for disposal if necessary.
The packaging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.

GB│IE│NI │ 13 ■
SLS 3 A1
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of
purchase. If this product has any faults, you, the buyer, have
certain statutory rights. Your statutory rights are not restricted
in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date
of purchase. Please keep your original receipt in a safe
place. This document will be required as proof of pur-
chase.
If any material or production fault occurs within three years
of the date of purchase of the product, we will either repair
or replace the product for you at our discretion. This war-
ranty service is dependent on you presenting the defective
appliance and the proof of purchase (receipt) and a short
written description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product will
either be repaired or replaced by us. The repair or replace-
ment of a product does not signify the beginning of a new
warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected
under the warranty. This also applies to replaced and
repaired components. Any damage and defects present at
the time of purchase must be reported immediately after
unpacking. Repairs carried out after expiry of the warranty
period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with
strict quality guidelines and inspected meticulously prior to
delivery.
The warranty covers material faults or production faults.
The warranty does not extend to product parts subject to
normal wear and tear or fragile parts such as switches,
batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been
damaged, improperly used or improperly maintained.

■ 14 │ GB│IE│NI SLS 3 A1
The directions in the operating instructions for the product
regarding proper use of the product are to be strictly
followed. Uses and actions that are discouraged in the
operating instructions or which are warned against must
be avoided.
This product is intended solely for private use and not for
commercial purposes. The warranty shall be deemed void
in cases of misuse or improper handling, use of force and
modifications/repairs which have not been carried out by
one of our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe
the following instructions:
■ Please have the till receipt and the item number
(e.g. IAN 12345) available as proof of purchase.
■ You will find the item number on the type plate, an
engraving on the front page of the instructions (bottom
left), or as a sticker on the rear or bottom of the appli-
ance.
■ If functional or other defects occur, please contact the
service department listed either by telephone or by
e-mail.
■ You can return a defective product to us free of charge
to the service address that will be provided to you.
Ensure that you enclose the proof of purchase (till
receipt) and information about what the defect is and
when it occurred.
You can download these instructions along with
many other manuals, product videos and software
on www.lidl-service.com.

GB│IE│NI │ 15 ■
SLS 3 A1
Service
Service Great Britain
Tel.: [phone]
E-Mail: kom[email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kom[email protected]
CY Service Cyprus
Tel.: [phone]
E-Mail: kom[email protected]
IAN 307266
Importer
Please note that the following address is not the service
address. Please use the service address provided in the
operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com

■ 16 │ GB│IE│NI SLS 3 A1
Ordering replacement parts
You can order the following replacement parts for the
product SLS 3 A1:
► 1 cutting unit
(with 3 shaving heads)
Order the replacement parts via the Service Hotline
(see “Service” section) or simply visit our website at
www.kompernass.com:
NOTE
► Have the IAN number of the appliance ready (can
be found on the cover of these operating instructions)
when you place your order.

DK │ 17 ■
SLS 3 A1
Indledning ...........................18
Anvendelsesområde ...................18
Pakkens indhold ......................18
Beskrivelse af produktet ...............19
Tekniske data ........................19
Sikkerhedsanvisninger.................20
Indsætning/udskiftning af batterier ......22
Barbering............................23
Ved længere hår ......................24
Langhårskam.........................25
Rengøring, pleje og vedligeholdelse......25
Rengøring med rengøringsbørste ................26
Rengøring under rindende vand.................27
Opbevaring ..........................27
Bortskaffelse .........................28
Garanti for Kompernass Handels GmbH ..29
Service ....................................31
Importør ...................................31
Bestilling af reservedele................32
Indholdsfortegnelse