7
STS 12 A2
GB
Functions
With this TV simulator you can simulate the flicker patterns of a
switched-on television and so feign your presence to potential
burglars.
For this purpose 5 different settings are available:
ON: the LEDs light up in different colours and combinations.
DUSK+2HRS: the LEDs switch on automatically at dusk and then
light up for 2 hours.
DUSK+4HRS: the LEDs switch on automatically at dusk and then
light up for 4 hours.
DUSK+6HRS: the LEDs switch on automatically at dusk and then
light up for 6 hours.
OFF: the appliance is switched off.
Setup
Select a suitable location for setting up the appliance. This location
must fulfil the following criteria:
― The TV Simulator may not be directly visible from outdoors.
― The flickering generated by the TV simulator must be visible
on the walls and/or ceiling from outdoors.
― A power socket must be easily accessible.
― The TV Simulator must be installed such that it can be influ-
enced by the twilight. This means that the fall of light from
outside must be given! It should also be borne in mind that,
the closer the appliance is to a wall, the less light the twilight
sensor 8will have fall on it.
― The TV Simulator may not be located near a window which
could be well lit from outdoors, such as on a busy street or
next to street lights.
― There should be no additional time-controlled light source in
the room, e.g. a night light.
IB_102656_STS12A2_LB4.indb 7 26.06.14 15:18