Silverwood Leighton BS1130-COM User manual

Leighton Bathroom Collection 6 - Tier Etagere
Style#BS1130-COM
UPC#050276996644
>>assembly instructions
AI_BS1130-COM_V1

2
before you begin
1. Check for damaged or missing parts. Call our dedicated customer service team at 1-800-737-5267 or email customerservice
@cheyenneproducts.com to order missing supplies. Office hours: Monday-Friday from 8:00am-6:00pm-(Eastern time zone).
Please reference Style # BS1130-COM.
2. Use the carton as a working surface to prevent product damage during assembly.
3. DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT.
To ensure proper assembly, use only the parts included and use only the tools that are included or specifically
described in these assembly instructions.
4. Gather all tools prior to assembly.
tools provided tools required but
not provided
AI_BS1130-COM_V1
Congratulations on your latest Etagere purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck ––though we’re confident you won’t need it.

3
table of contents
introduction page 2
hardware page 4
parts list page 5
assembly step 1 : assemble the metal frame page 6
step 2 : attach the wood shelves to the metal frame page 7
step 3 : mount Etagere to the wall page 8
caution page 9
Questions? Call 1-800-737-5267 to order missing supplies. For faster service, please have style# ready when calling
AI_BS1130-COM_V1

Hardware
Bx20
5/32”x1” bolt
4
A x24
1/4"x1 3/16" bolt
F x1
hex wrench
C x4
leveler
D x2
5/32”x2 3/8” mounting screw
E x2
wall anchor
AI_BS1130-COM_V1

ITEM DESCRIPTION QUANTITY
5
left side frame 1
right side frame 1
top frame 1
support bar 10
3
middle wood shelf 1
1
bottom wood shelf
top wood shelf
①
②
③
④
④
④
④
⑤
⑤
⑤
⑥
⑦
AI_BS1130-COM_V1
④

STEP 1
6
A x24
1/4"x1 3/16" bolt
C x4
leveler
F x1
hex wrench
1. Screw four levelers Cx4 into the bottom of left
and right side frames
2. Attached top frame and support bar x10 to left and right
side frame using screw Ax24.
Only tighten bolts halfway.
①
②
③
④
④④
④④
④④
④
④
④
AI_BS1130-COM_V1
+)(
+)(

7
Bx20
1. Attach top wood shelf x3, middle wood shelf and bottom
wood shelf to support bar x10 using bolts Bx20. Only tighten
bolts halfway.
2. Now, fully tighten all bolts
①
②
③
⑤
⑤
⑤
⑥
⑦
STEP 2 AI_BS1130-COM_V1
5/32"x1 bolt
④④
④
④
④
④
④
④
④
④

A: If mounting into drywall,drill 1/4″pilot holes into drywall
and insert plastic wall anchor (Ex2) into pilot holes.
Tighten mounting screw (D) into plastic wall anchors
(E) through holes in the back tubes of the unit.
B: If mounting to studs in wall. screw mounting screws
(D) directly into studs through holes in the back tubes
of the unit.
caution: plastic wall anchors and mounting screws
must be used when mounting product to drywall.
8
STEP 3 AI_BS1130-COM_V1
***********************************************************
WARNING
** Weight restriction for each shelf: 11 LBS
** Maximum load for the product: 55 LBS
** Cleaning: wipe with a soft cloth, never use harsh chemicals or abrasive cleaner for polishing.
** Serious or fatal injuries can occur from furniture tip-over.
To help prevent furniture tip-over:
- Use provided mounting hardware to secure furniture to the wall.
This may reduce but not eliminate the risk of furniture tip-over.
- Do not allow children to climb on furniture.
- Keep remote controls, toys, and other items that might attract children off of this product.
- Unless specifically designed to accommodate, do not set televisions or other heavy objects
on top of this product.