Sim-Lab VARIO VESA TRIPLE ADAPTER KIT User manual

VARIO™VESA TRIPLE ADAPTER SET
VERSION 2.2
Last updated: 09-10-2023
INSTRUCTION MANUAL

2|2 10
BEFORE YOU START:
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (page 11) and make sure all the parts are delivered.
This product is available in a set of 3 while also being available individually. This manual will focus on the
set of 3, hence the quantities in the bill of materials are what they are.
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.
Tools needed:
5/6MM

3|3 10
Measurements given are just reference
measurements to allow for easy installation
and offer a baseline.
Install A9 only after the Vario VESA holder
has been mounted to a profile.
24MM
or
0.9”
Slot-Nut M8
2X
M8 X 40
(A9)
1X1X
Vario VESA
Holder
M8 X 16
2X
Washer M8
6X
A8
A1
A12
A11
A9

4|4 10
Vario VESA
Plate
1X
Vario VESA
Pin Holder
2X
M5 X 20
4X
Vario VESA
Pin
1X
A6
A4
A2
A3

5|5 10
36MM
or
1.4”
20MM or 0.8”
Measurements given are just reference
measurements to allow for easy installation
and offer a baseline.
M8 X 40
(A9)
2X
M5 X 20
(A13)
2X A9
A10

6|6 10
M4 X 10
(A8)
8X
A7

7|7 10
Drop the pin (A4) into the slot and carefully angle the
monitor downwards to rest on the end of part A12.
Now you can make all neccesary adjustments.

8|8 10
The highlighted parts are responsible for the
adjustments shown.
All adjustments are done by simply threading
an adjustment screw in/out depending on
what you want to achieve.
TILT
SIDEWAYS
HEIGHT/ROTATION

9|9 10
BOX A - Vario VESA triple adapter set
HARDWARE KIT
#Part QTY Note
A1 Vario VESA holder 1
A2 Vario VESA plate 1
A3 Vario VESA pin holder 2
A4 Vario VESA pin 1
A5 Bolt M5 X 20 DIN 7991 4
A6 Screw M4 X 16 DIN 7985 4 Philips head.
A7 Screw M4 X 10 DIN 7985 4 Philips head.
A8 Bolt M8 X 16 DIN 912 2
A9 Set screw M8 X 40 DIN 916 3
A10 Set screw M5 X 20 DIN 916 2
A11 Washer M8 DIN 125-A 2
A12 Slot-Nut M8 2
A13 Standoff M4 x 10 4
Disclaimer: for some entries on this page, we supply more than required as spare
materials. Don’t worry if you have some leftovers, this is intentional.

10 |10 10
If you still have some questions regarding assembly of this product or about the manual itself,
please refer to our support department. They can be reached at
suppor[email protected]
Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab
customers hanging out. They might just help you along if you ask them nicely ;)
www.sim-lab.eu/discord
If you feel like printing this manual, please consider the environment before doing so. For the best
results, make sure you print at 100% scale without borders.
Product page on the Sim-Lab website: