IBM 10/100/1000 Base-T Ethernet PCI Guide

10/100/1000 Base-T Ethernet PCI Adapter
Installation and Using Guide
SA23-1231-00

First Edition (September 2000)
Before using this information and the product it supports, read the information in “Safety Information” on page v and
“Appendix B. Notices” on page 23.
©International Business Machines Corporation 2000. All rights reserved.
Note to U.S. Government Users Restricted Rights--Use, duplication or disclosure restricted by GSA ADP Schedule
Contract with IBM Corp.
Note
Before you install this product and use this information, be sure to read the
product warranties and notices information included with the system unit into
which you are installing the product.

Contents
Safety Information.......................v
Handling Static-Sensitive Devices.................vii
About This Book .......................ix
ISO 9000 ..........................ix
Related Publications ......................ix
Trademarks .........................ix
Chapter 1. Overview ......................1
Software Requirements .....................2
Chapter 2. Preparing for Installation ................3
Verifying Your Hardware Requirements ................3
Checking Prerequisites .....................3
Chapter 3. Installing the Device Driver Software ............5
Chapter 4. Installing the Device Driver on the RS/6000 SP System......7
Checking System Prerequisites...................7
Installing Software on the Control Workstation .............10
Installing Device Drivers on the SP Nodes...............11
Chapter 5. Installing the 10/100/1000 Base-T Ethernet PCI Adapter .....13
Installing the Adapter......................13
Verifying Adapter Hardware Installation................14
Verify AIX Software Installation ..................14
Running Adapter Diagnostics ...................15
Chapter 6. Connecting to an Ethernet Network ............17
Connecting the Network Cables and Adapter ..............17
Understanding the Adapter LEDs..................18
Appendix A. Communications Statements ..............19
Federal Communications Commission (FCC) Statement ..........19
European Union (EU) Statement ..................20
International Electrotechnical Commission (IEC) Statement .........20
United Kingdom Telecommunications Safety Requirements .........20
Avis de conformité aux normes du ministère des Communications du Canada. . . 20
Canadian Department of Communications Compliance Statement .......20
VCCI Statement .......................21
Radio Protection for Germany ...................21
Appendix B. Notices .....................23
Reader’s Comments — We’d Like to Hear From You ..........25
iii

iv 10/100/1000 Base-T Ethernet PCI Adapter Installation and Using Guide

Safety Information
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock.
Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
When adding or removing any additional devices to or from the system,
ensure that the power cables for those devices are unplugged before the
signal cables are connected. If possible, disconnect all power cables from the
existing system before you add a device.
Use one hand, when possible, to connect or disconnect signal cables to
prevent a possible shock from touching two surfaces with different electrical
potentials.
During an electrical storm, do not connect cables for display stations, printers,
telephones, or station protectors for communication lines.
v

vi 10/100/1000 Base-T Ethernet PCI Adapter Installation and Using Guide

Handling Static-Sensitive Devices
Attention: Static electricity can damage this device and your system unit. To avoid
damage, keep this device in its anti-static protective bag until you are ready to install it.
To reduce the possibility of electrostatic discharge, follow the precautions listed below:
vLimit your movement. Movement can cause static electricity to build up around you.
vHandle the device carefully, holding it by its edges or its frame.
vDo not touch solder joints, pins, or other printed circuitry.
vDo not leave the device where others can handle and possibly damage the device.
vWhile the device is still in its anti-static package, touch it to an unpainted metal part
of the system unit for at least two seconds. (This drains static electricity from the
package and from your body).
vRemove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it on its
static-protective package. (If your device is an adapter, place it component-side up).
Do not place the device on your system unit cover or on a metal table.
vTake additional care when handling devices during cold weather, as heating reduces
indoor humidity and increases static electricity.
vii

viii 10/100/1000 Base-T Ethernet PCI Adapter Installation and Using Guide

About This Book
This book provides information about the 10/100/1000 Base-T Ethernet PCI Adapter, as
well as how to attach the adapter to a network. Use this book together with your
specific system unit and operating system documentation.
ISO 9000
ISO 9000 registered quality systems were used in the development and manufacturing
of this product.
Related Publications
The following publications contain related information:
vSystem unit documentation for information specific to your hardware configuration
vOperating system documentation for information specific to your software
configuration
v
PCI Adapter Placement Reference Guide (for the latest version, you may need to
contact your marketing representative)
Trademarks
The following term is a trademark of International Business Machines Corporation in the
United States, other countries, or both:
vAIX
vRS/6000
vSP
Other company, product, and service names may be trademarks or service marks of
others.
ix

x10/100/1000 Base-T Ethernet PCI Adapter Installation and Using Guide