SIM Roulette SR-Organizer User manual

SR-Organizer
User manual

EQUIPMENT
GETTING STARTED WITH THE DEVICE
Earphone 2 modem
Microphone 2 modem
Earphone 1 modem
Microphone 1 modem
Micro USB power connector
(5V, 2A)
SIM card (Nano) 1 modem
SIM card (Nano) 2 modem
Operating mode indicator
Connector for connection
periphery
Control buttons
SIM aggregator
Manual
1
1

CONNECTING TO A LOCAL NETWORK
The SIM aggregator connects to the local network via WiFi.
By default, the device is configured to connect to a network with the name (SSID):
SIM and password: roulette
To change the connection settings, you can use the following advice:
1. Set up a SIM hotspot with the password roulette on your mobile phone.
2. Turn on the SIM aggregator and make sure that it connects to the created WiFi
network.
3. In the mobile phone browser, go to the address http://sim-roulette.local or
http:// IP_address_your_SIM_roulette (the IP address is displayed in the top line
of the device display when connected to the network).
4. Log in. By default, login: admin, password: admin.
5. Go to the Settings/Network section, select your work network and enter the
password.
6. Save settings. After restarting, the SIM aggregator will connect to the selected
network.

HELP AND SUPPORT
WEB-site: sim-roulette.com
Technical documentation: sim-roulette.com/en/doc
Форум: sim-roulette.com/forum
Forum: [email protected]
We recommend registering on the website sim-roulette.com
and link the aggregator to your account.
Thank you for purchasing the SR-Organizer and wish you fruitful work!
BEGINNING OF WORK
1. Install a Nano SIM card in slot 1 of modem 1 (shown
on the figure).
2. Go to the WEB-interface Terminal section.
3. If there is a stable connection with the device, the upper signal line should be
green, if there is no connection — gray.
4. Enter the command modem>on. The command will turn on GSM modems.
5. To check the connection of the SIM card to the cellular network, use
command modem>send:AT+CREG? (with an interval of 2-3 seconds).
While the connection is in progress, the modem returns a code of 0.2; successful
codes connections 0.1 and 0.5; error codes 0.0 and 0.4; code 0.3 usually means
that the SIM card is blocked.
6. As a check, make an outgoing call with the
modem>send command:ATD+79001234567;
Complete list of AT commands: sim-roulette.com/en/doc/at
API SR-Organizer: sim-roulette.com/en/doc/sr-box
Applications for SIM Roulette: sim-roulette.com/apps
If you plan to work with the aggregator using the WEB-panel
SR-Navigator, we recommend registering at sim-roulette.com and
familiarizing yourself with the capabilities of this software.