Celerity CT Fiber Optic HDMI Detachable Connector User manual

Step 1: Pre-wiring the ber optic cables
Celerity Fiber Optic cables are directional and must be installed correctly. Ensure that the ber optic plug marked T
is located at the source location. Ensure that the ber optic plug marked R is located at the display.
Step 2: Attaching the Detachable Fiber Optic (DFO) connector or DFO Keystone connector
Attach the DFO connector or DFO Keystone connector marked T to the ber optic plug marked T. Connect to the
source component. Attach the DFO connector or DFO Keystone connector marked R to the ber optic plug marked
R. Connect to the display component.
USB Power at the Display location (DFO-HDMI & DFO-DVI) Required
The DFO connector marked R also includes a USB cable to provide power for the R connector. Connect the USB cable to an
available USB port on the display. If there is no convenient USB port available then alternatively a USB-AC adapter (5V/1000mA, not
supplied) may be used instead.
USB Power at the Source location (DFO-HDMI & DFO-DVI) Only if needed
The DFO connector marked T also includes a USB cable to provide power for the T connector when power is not provided by the
Source component. If the blue LED on the DFO connector illuminates without the USB cable connected to power, the USB cable
may remain unconnected.
USB Power at the Display location (DFO-KEY) Required
For DFO Keystone wall plate, connect the R Keystone wall plate to the Display with the Celerity HDMI+5V USB Power cable,
connecting the HDMI to the display and the USB to an available USB port on the display or a USB-AC adapter. The Celerity
HDMI+5VUSB cable is a required separate item available as CTK-03-5V (3ft) or CTK-06-5V (6ft).
LED Display Indicators (DFO-HDMI & DFO-DVI only)
Ensure that the blue LEDs on the end of the DFO connectors are illuminated when the source and display are powered.
All Celerity Fiber Optic Cables are plenum (OFNP) rated.
Support
For further assistance, contact [email protected] or call 949.453.9988 from 9:00a until 5:30p Pacic Time.
•fiber optic hdmi
detachable keystone connector
User Guide
06/2016
steps
Celerity Detachable Fiber Optic Connectors
Connection diagram on reverse
celeritytek.com 10 Goddard Irvine CA 92618

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Caution: The user is cautioned that changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
15.105 -- Class B digital device or peripheral
For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty
Celerity Technologies warrants this product against defects in material or workmanship for a period of 12 months from the original date of purchase. Celerity
Technologies will, at its sole option, (i) repair the product using new or refurbished parts, or (ii) replace the product with a new or refurbished product. For purposes
of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specications. IN THE EVENT OF A DEFECT, THESE ARE YOUR
EXCLUSIVE REMEDIES.
To obtain warranty service, you must deliver the product, postage prepaid, in accordance with instructions at Celerity Technologies’ website: http://www.celeritytek.com.
This Limited Warranty only covers product issues caused by defects in material or workmanship during proper consumer or commerical use; it does not cover product
issues caused by any other reason, including but not limited to improper consumer or commercial use, acts of God, misuse, limitations of technology, or modication
of or to the product.
LIMITATION ON DAMAGES
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO
THE PERIOD OF ONE (1) YEAR FROM THE DATE OF PURCHASE. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, CELERITY TECHNOLOGIES SHALL NOT
BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF PROFITS, CORRUPTION OR LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL
DAMAGES OR LOSSES ARISING OUT OF RELATED TO YOUR USE OF THE CELERITY TECHNOLOGIES PRODUCT.
Some state or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts,
so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specic legal rights and you may have other rights which vary from state to
state or jurisdiction to jurisdiction. Please register this product at http://celeritytek.com/warranty. Retain your sales receipt for proof of date of purchase.
Connection Diagrams
Connect the USB plug (HDMI & DVI only) to an
available USB port on the display component.
This provides power to the connector without
the need for an external power supply.
step
Connect the R DFO connector to the
fiber optic plug on the cable. Then
connect to the display.
step
Extend the fiber optic
cable to the display (RX).
TX
step
step
Connect the T DFO connector to the fiber optic
plug on the cable. Then connect to the component.
The detachable connectors are proprietary and
should not be lost or damaged as they only work
with Celerity Fiber Optic cables.
Place the T connector at the source location. Extend
the fiber optic cable to the display (RX).
The Celerity Fiber Optic plugs are clearly
marked T for source (TX) and R for display (RX) and
must be placed correctly.
VIDEO
OUT
COMPONENT
VIDEO OUT
Extend the fiber optic
cable to the display (RX)
Keystone wall plate.
Install the T Keystone wall plate at the source
location. Extend the fiber optic cable to the
display (RX).
The Celerity Fiber Optic plugs and Keystone
connectors are clearly marked T for source
(TX) and R for display (RX) and must be
placed correctly.
Connect the R Keystone wall plate to
the display with a Celerity HDMI+5V
USB Power cable (available separately).
Connect the USB plug to an available USB
port on the display component. This
provides power to the connector without the
need for an external power supply.
Connect the T Keystone wall plate to
the component with a Celerity HDMI
High Speed cable (available separately).
User Guide
06/2016