Simge Elite Series User manual

BULDING AUTOMATION SYSTEMS
Elte Seres
Vdeo Doorphone System
Installaton and Usage Manual
Product
Change
Support
Service Qualitication Certicate
YEAR
WARRANTY
MADE IN
TURKEY

SYSTEM INSTALLATION
The System you have purchased s a televson qualty colar mage. and
desgned to gve clear sound.
Howaver, n order for the system to work properly and gve a clear mage,
the cable the choce and connecton type of the buldng and the number of
flats. must be approprate.
Snce a very low current passes through the cables n vdeoless ntercom
systems, old ntercoms can work wth scrap copper or copper-coated
alumnum cables.
In vdeo ntercoms, each flat montor draws a hgh (200-300 ma.) current
when t s actve at low (25 ma.) on standby lke a stray televson. In
addton, vdeo amplfiers and juncton box dstrbutors also draw (50-100
ma.) current each.
Snce 8-color ntercom cable carres both power and sgnal, thn and poor
qualty cables cannot provde sufficent current and the nose on the work
cable, whch must be thck, dstorts the mage.
The cable to be used should be 8x0.22 mm pure copper.
Cable connecton and dstrbuton products are n the form of dstrbuton
from floor to floor or juncton box floor dependng on the structure of the
buldng. Addtonal thck cable (2x1.5 mm) or a second power supply may
be requred for supply n buldngs wth multple floors and sngle juncton
boxes.
In order to avod any problems after assembly, place the power supply,
amplfier and juncton box dstrbutors n a plastc panel.

FLOOR TO FLOOR CONNECTION
If the buldngs wth nstallaton from floor to floor are small, 1 juncton box
dstrbutor s used for the mage and vdeo amplfier s used for more than
10 floors. Separate mage output s used for each branch. Yellow cables
from branches cannot be connected n parallel.
In ths connecton, as many flats as the number of floors are fed from the
same cable. After the connecton s made, the voltage between red (+) and
blue (-) on the montor should be more than 16 volts whle the top floor
apartment s n contact wth the door. If t s nsufficent, a second power
supply s connected n parallel to the top floor.
Important: The red and pnk cable must be connected together n the
Buldng Installaton. Lkewse, the blue and black cable should be
connected together. Termnals numbered 1 and 2 are valet ends.
Floor to Floor Connecton Dagram
Less Flat Buldngs
Floor to Floor Connecton Dagram
Mult Apartment Buldngs
RED
PINK
BLACK BLUE
RESISTANCE
SES VIDEO BUSY DATA
RING
BUTTON
RING
BUTTON
OTHER FLATS
ON THE FLOOR
JUNCTION
DISTRIBUTOR
JUMPER
FITTED
POWER SOURCE
JUMPER
FITTED
OTHER FLATS
ON THE FLOOR
RING
BUTTON
RING
BUTTON
RESISTANCE
SES VIDEO BUSY DATA
RED
PINK
BLACK BLUE
POWER SOURCE
VIDEO ENHANCER
DAİRE NO YAZIN
# TUŞUNA BASIN
DAİRE NO YAZIN
# TUŞUNA BASIN
VIDEO ENHANCER
BLACK GREY
DOOR SWITCH
OUTPUTS
BLACK GREY
DOOR SWITCH
OUTPUTS

CONNECTION IN A ONE-POINT BUILDING
In such buldngs, the cables runnng down the connecton pont carry the
energy and sgnals of the entre system.
8x0.22 mm cable alone s not enough.
In small buldngs (maxmum 9 floors) the cable nsde the shaft should be
2x0.75 mm supply cable parallel to the 8x0.22 mm cable.
In buldngs 10 floors and larger, 2x1.5 feedng cable parallel to 8x0.22 mm
cable nsde the shaft, RG6 satellte cable should be used for clear vew n
buldngs larger than 80 flats.
The red one of the addtonal supply cable should be connected n parallel
to the red and pnk colors of the door ntercom cable on each floor, the
black one should be connected n parallel to the blue and black colors of
the door nterphone cable on each floor.
Only the jumper (black brdge) of the juncton box dstrbutor on the
upper floor wll be attached.
After all connectons are made, f the voltage between the red and blue
cable n the top floor flat s lower than 16 voltage, a second power source
should be connected to the energy cable on the top floor.

TYPE CIRCLE NUMBER
# PRESS THE KEY
Important: The red and pnk cable must be connected together n the
Buldng Installaton. Lkewse, the blue and black cable should be
connected together. Termnals numbered 1 and 2 are valet ends.
JUNCTION (SINGLE COLUMN) CONNECTION SCHEME
(SINGLE LAYER SHOWN)
RING
BUTTON
OTHER FLATS
ON THE FLOOR
JUMPER
FITTED
JUNCTION
DISTRIBUTOR
BLACK GREY
DOOR SWITCH
OUTPUTS
POWER SOURCE
SES VIDEO BUSY DATA
RED
PINK
BLACK BLUE
Cable

TYPE CIRCLE NUMBER
# PRESS THE KEY
DIGITAL BELL PANEL PROGRAM GUIDE
Rngng the crcle bell from the bell panel
To rng the crcle bell, you can rng the bell by dalng the crcle
number and pressng the square button (#) at the bottom rght.
Rngng the crcle bell from the bell panel:
To rng the crcle bell, you can rng the bell by dalng the crcle
number and pressng the square button (#) at the bottom rght.
Openng the door wth password:
There s only one door openng password on the doorbell panel.
Factory default door openng password s defined as 1234.
Example: **1234
Access to the servce menu;
To access the servce menu, the (*) star 2580 s the factory default
menu password.
Changng the door password;
To change the door password, enter the menu by settng * 2580.
Move through the menu by pressng the hash key (#) at the bottom
rght. When you come to the secton where t says door password,
enter your 4-dgt (0) non-zero password and change the password.
By pressng the hash key (#) at the bottom rght, you save your new
password n the menu.
Flat number and name search from panel;
You can use the rght or left arrow keys to search the name
from the panel. Press zero for the doorman button (0).
Screen openng
Hold the button to speak,
let go and lsten
Meetng wth the officer
Meetng wth securty
Open the door swtch

RİNG CODİNG TABLE
SWITCH POSITIONS
OPEN
CLOSED
OPEN
CLOSED
FLAT CODING
APARTMENT
NUMBER APARTMENT NUMBER APARTMENT NUMBER APARTMENT NUMBER
OFFICIAL
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
CIRCLE CIRCLE
SWITCH NO SWITCH NO SWITCH NO SWITCH NO

7 nc Elte Seres - Black 7 nc Elte Seres - Whte
4.3 nc Elte Seres - Black4.3 nc Elte Seres - Whte
18V 2Apower source DIGITAL TELEPHONE HANDSET
Slm Sensor Lamp Sensor lamp