WI-FI SETUP
Download the Ring app from the App
Store or Google Play. Open the Ring app
and select Setup Device. Follow the
in-app instructions to set up your Ring.
INSTALLATION
1. Remove doorbell button and power off your
transformer (for wired installation only).
2. Fill the hole left in your wall with the provided caulking cord
(for wired installation only).
3. Line up the mounting bracket using the provided mounting
level.
4. Install the mounting bracket using the provided screwdriver
bit, handle and drill bit.
Brick - use concrete screws and anchors
Concrete - use concrete screws and anchors
Stucco - use concrete screws and anchors
Wood - use wood screws
Vinyl - use wood screws
5. Remove the mounting level.
6. Connect your doorbell wiring to the terminal screws
located on the mounting bracket (for wired installation only).
7. Place the device on the mounting bracket.
8. Tighten the security screws at the bottom of the device using
the propietary screwdriver bit.
9. Provide power back to your transformer
(for wired installation only).
8