Simmons DURANGO 5010-59 User manual

ASSEMBLY INSTRUCTIONS ITEM # 5010 - 59
DURANGO DINING TABLE
5010 - 59 DINING TABLE PART LIST
COMPLETE DINING TABLE
Step 2
B
A
MADE IN MALAYSIA
5010 - 59 DINING TABLE PART LIST
PART DRAWING DESCRIPTION QTY
TABLE TOP 1
A
BTABLE LEG 4
PART DRAWING DESCRIPTION QTY
C
D
E
FWRENCH 1
8
8
8
SPRING WASHER
FLAT WASHER
Step 1
United Wood Products , Inc. Customer Service Contact Information :
Toll Free Phone Number : 1-800-458-7212
Email : [email protected]
Website : www.unitedfurnitureindustries.com
PLEASE NOTE : With use, screw may become loose & must be tightened periodically
Table Leg Assembly
NOTE : If needed, only part C-F are available for replacement .
HEX BOLT
(5/16'' x 2 1/2'')
C
D
E
F
Remove the wood shipping blocks attached on
the corners .
These are used for shipping purposes only.
Please discard after removing.
Tools Needed : Phillips screwdriver

ASSEMBLY INSTRUCTIONS
PART DRAWING DESCRIPTION QTY
BENCH
CUSHION 1
A
B
BENCH LEG 4
PART DRAWING DESCRIPTION QTY
C
D
E
FWRENCH 12.8 1
8
8
8
SPRING WASHER
5/16'' HEX NUT
FLAT WASHER
COMPLETE DINING BENCH
MADE IN MALAYSIA
5010 - 01 DINING BENCH PART LIST
ITEM # 5010 - 01
5010 - 01 DINING BENCH PART LIST
C
BENCH FRAME 1
B
A
C
D
E
F
DURANGO DINING BENCH
United Wood Products , Inc. Customer Service Contact Information :
Toll Free Phone Number : 1-800-458-7212
Email : [email protected]
Website : www.unitedfurnitureindustries.com
PLEASE NOTE : With use, screw may become loose & must be tightened periodically
NOTE : If needed, only part C-F are available for replacement .
Bench Leg Assembly

ASSEMBLY INSTRUCTIONS
COMPLETE DINING CHAIR
Step 1
MADE IN MALAYSIA
5010 -02 DINING CHAIR PART LIST
ITEM # 5010 - 02
5010 - 02 DINING CHAIR PART LIST
PART DRAWING DESCRIPTION QTY
BACK REST 1A
B1
C2
FRONT
CHAIR LEG
Step 2
Step 3
H
J
K
J
K
l
A
B
G
D
E
F
L
L
C
PART DRAWING DESCRIPTION QTY
E
F
G
H
WRENCH 1
4
4
4
5/16'' SPRING WASHER
5/16'' HEX NUT
5/16'' FLAT WASHER
J
K
L
1/4'' SPRING WASHER
1/4'' FLAT WASHER 7
7
3
4
I
1
ALLEN KEY
D
DURANGO DINING CHAIR
United Wood Products , Inc. Customer Service Contact Information :
Toll Free Phone Number : 1-800-458-7212
Email : [email protected]
Website : www.unitedfurnitureindustries.com
PLEASE NOTE : With use, screw may become loose & must be tightened periodically
NOTE : If needed, only part D-L are available for replacement .
Lay chair seat on soft , clean surface
Seat Assembly - Front Leg Bolts (4)
Seat Assembly - Center Back Bolts (3) Seat Assembly - Corner Back Bolts (4)
35MM BOLT
80MM BOLT
UPHOLSTERED
SEAT BOX