Simpli Home 3AXCARLBEN-MB User manual

1/17
ENTRYWAY STORAGE BENCH
MODEL # 3AXCARLBEN-MB
ARLINGTON / RALEIGH / PATTERSON

2/17
FOR REPLACEMENT PARTS OR HELP WITH
ASSEMBLY PLEASE CONTACT US AT:
simpli-home.com/customer-support
PLEASE ENSURE TO HAVE THE MODEL #
INSTRUCTION BOOKLETFROM THE PACKAGING OR
TO RETURN THE PRODUCT:
PLEASE CONTACT THE RETAILER
WHERE THE ITEM WAS PURCHASED FROM

3/17
Upload an image of our furniture
in your home with a short review
to our facebook page for a chance to
ENTER
TO WIN
Win up to $3000 of
Simpli Home furniture!!!
www.facebook.com/simplihomefurnishings

4/17
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
5/17
MODEL # 3AXCARLBEN-MB
A
PARTS DESCRIPTION
SIDE
QTY 1 PAIR
SEAT
QTY 1
B
C D
BOTTOM PANEL
QTY 1
G
FRONT
QTY 1
E F
BACK
QTY 1
BACKREST
QTY 1
DIVIDER
QTY 1
This Side Up

1
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
23
4 5
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/17
ALLEN KEY BOLT
M6 X 40 mm
QTY 8
ALLEN KEY BOLT
M6 X 30 mm
QTY 4
PHILLIPS SCREW
M3 X 12 mm
QTY 9
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 4
ALLEN KEY SCREW
M6 x 30 mm
QTY 2
6
7 8 9
ALLEN KEY
QTY 1
LID SUPPORT
QTY 1
WOOD DOWEL
8 X 30 mm
QTY 6
PHILLIPS SCREW
M4 X 25 mm
QTY 2
ALLEN KEY BOLT
M6 X 80 mm
QTY 2 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 20 mm
QTY 4
10 11
WOOD BOLT CAPS
QTY 2
12
MODEL # 3AXCARLBEN-MB
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included

COMPONENTS – KEY DIAGRAM
7/17
A
FC
B
G
E
A
D
MODEL # 3AXCARLBEN-MB

8/17
ASSEMBLY
STEP 1
1. Insert Dowel 6 into Divider C .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom of Back F with Dowel 6 on Divider C .
( Note: please pay close attention to the location of the 2 small guide holes which
accommodate the lid support. They need to be on the same side as the hinges .)
4. Using 2 Allen Key Screws 3 to attach Back F to Divider C .
Small pre-drilled holes
Hinge
6
C
3
F
4
This Side
Up
MODEL # 3AXCARLBEN-MB

ASSEMBLY
STEP 2
1. Attach Bottom Panel G to Divider C & Back F by sliding on the gap between
Divider C & the long rail on Back F .
9/17
G
C
G
C
F
F
MODEL # 3AXCARLBEN-MB

ASSEMBLY
STEP 3
1. Insert Dowel 6 into Divider C .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom of Front D with Dowel 6 on Divider C .
4. Using 2 Phillips Screws 8 to attach Divider C to the middle bar on Front D .
10/17
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCARLBEN-MB
D
C6
8
8

11/17
ASSEMBLY
STEP 4
1. Insert 2 Dowels 6 into each Side A at specified location.
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on side bars of Front D & Back F with Dowel 6 on each Side A .
4. Using 4 Allen Key Bolts 1 (40mm length ) to attach Front D & Back F to each Side A .
1
6
6
A
D
F
1
6
6
4
DA
6
6
1
F
MODEL # 3AXCARLBEN-MB

12/17
ASSEMBLY
STEP 5
1. Use Phillips screwdriver to attach Phillips Screw Round Head 11 into guide holes on
Bottom Panel G .
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCARLBEN-MB
11 G

1. Attach Lid Support 5 into pre-drilled holes of Seat B and Divider C using Phillips
Screws Round Head 9 .
2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
13/17
ASSEMBLY
STEP 6
1. Attach Seat B to 3 hinges on Back F using Phillips Screws 7
( using guide holes underneath of Seat ).
2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
STEP 7
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCARLBEN-MB
59
B
C
7
B
7

1. Attach Backrest E to back of Sides A using Allen Key Bolt 2 into pre-drilled holes.
2. Use Allen Key 4 to tighten Bolts. Do not over-tighten.
14/17
ASSEMBLY
STEP 8
E2
2
4
2
MODEL # 3AXCARLBEN-MB

15/17
ASSEMBLY
STEP 9
10
10
4
E
12
12
1. Attach Backrest E to back of Side A using Allen Key Bolts 10 into pre-drilled holes
on Side A .
2. Insert Cross Nuts 10 into pre-drilled holes in Backrest E with the slot facing out.
Use a flathead Screwdriver to turn it to align with the Bolts 10 .
Repeat on the opposite side.
3. Use Allen Key 4 to tighten Bolts.
1. Insert 2 Wood Bolt Caps 12 into exposed bolt holes on side of bench.
STEP 10
MODEL # 3AXCARLBEN-MB

16/17
WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
simpli-home.com/customer-support.
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.

17/17
Question, problems, missing parts?
Before returning your product
please email Customer Support at
simpli-home.com/customer-support
or call
Customer Support at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
For more information visit us on our website
www.simpli-home.com
Like us on facebook
www.facebook.com/simplihomefurnishings