Simpli Home WyndenHall Brooklyn + Max 3AXCCON-08 User manual

Connaught / Hampshire / Somerset
Storage Bench Trunk
Model # 3AXCCON-08
1

Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
üAcvate your 1-year warranty
üAutomac entry to win a $500 gi cerficate
üEarn instant rewards and save simpli-home.com/product-registraon
2

Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Review your product and collect rewards!
Send us images or share them on social and qualify for instant rewards.
You may even receive store credit on your enre purchase!
simpli-home.com/share-images
Share photos and get your cash back!
3

For Fastest Customer Service:
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.
Visit Us
Visit our site directly at
www.simpli-home.com
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
Email Us
customer[email protected]
Other ways to contact us…
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order informaon and issue.
6. Submit form.
7. A customer service associate will contact you.
4

Identify all the parts and hardware. Do not discard of the packaging until you have
checked that you have all the parts and hardware required. Hardware package may
have spare parts.
We recommend that you assemble this unit on a carpeted floor to avoid scratches.
If using power tools, set the tool to low torque to avoid damage.
WARNING: This item contains small parts which can be swallowed by children and
pets. Keep children and pets away during assembly. To avoid danger of suffocation,
always keep plastic bags away from children and pets.
May require 2 people for ease of assembly.
IMPORTANT: Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Safety Information
5

• Do not use liquid or aerosol products
• Do not use abrasive cleaners
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• Dust with soft dry cloth
• If you can avoid it, don't put furniture near heating vents; if you can’t, keep the item 3 to
4 inches away from the wall, giving the heat and air space to circulate
• For soil build-up, wipe with damp cloth & dry
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger but lose moisture more
slowly than other finishes.
• Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly
To help protect your wood furniture, take these steps:
• Don't over-humidify; that can damage wood by causing it to expand and contract
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp
This furniture is designed for indoor use.
Care & Maintenance
6

A
SIDE (L&R Same)
QTY 2
SEAT
QTY 1
B
C D
BOTTOM PANEL
QTY 1
BOTTOM SUPPORT LEG
QTY 2
G
FRONT
QTY 1
E F
BACK
QTY 1
DIVIDER (L&R Same)
QTY 2
Up Side /
Vertical
7
Part Description
Pre-Assembly Information Model # 3AXCCON-08

1 2 3
4 5
PHILLIPS SCREW
M3.5 X 15 mm
QTY 9
PHILLIPS SCREW ROUND HEAD
M4 X 15 mm
QTY 8
ALLEN KEY SCREW
M6 x 30 mm
QTY 12
6
7 8
ALLEN KEY
QTY 1
LID SUPPORT
QTY 1 PAIR ( LEFT and RIGHT )
WOOD DOWEL
Ø8 X 30 mm
QTY 8
PHILLIPS SCREW
M4 X 30 mm
QTY 8
CAM LOCK PIN
CAM LOCK
QTY 8 SET
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
8
Hardware Description
Pre-Assembly Information Model # 3AXCCON-08

A
B
B
C
D
9
Components - Key Diagram Model # 3AXCCON-08Components - Key Diagram Model # 3AXCCON-08

Step 1
Small pre-drilled holes
1. Attach 4 Cam Lock Pins 2 to Back D into guide holes.
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
2. Align and insert Cam Lock Pins on Back D into pre-drilled holes on Dividers E .
accommodate the lid support. They need to be on the same side as the hinges .)
( Note: please pay close attention to the location of the 2 small guide holes which
3. Place 4 Cam Locks 2 into pre-drilled holes on Dividers E (2 Cam Locks / each Divider ).
D
Up
Side
/ Vertical
Up
Side
/ Vertical
10
Assembly Model # 3AXCCON-08

Step 2
Divider E & the long rail on Back D .
1. Attach Bottom Panel F to Divider E & Back D by sliding on the gap between
D
Up Side /
V
ertical
11
Assembly Model # 3AXCCON-08

Step 3
1. Attach 4 Cam Lock Pins 2 to Front C into guide holes.
3. Place 4 Cam Locks 2 into pre-drilled holes on Dividers E (2 Cam Locks / each Divider ).
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
2. Align and insert Cam Lock Pins on Front C into pre-drilled holes on Dividers E .
Up Side
/ Vertical
12
Assembly Model # 3AXCCON-08

Step 4
2. Align pre-drilled holes on side bars of Front C & Back D with Dowel 3 on Sides B .
drilled holes ( 6 Screws / each Side B ).
4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
1. Insert 4 Dowels 3 into each Side B at specified location.
3. Attach Front C & Back D to Sides B using 12 Allen Key Screws 1 through pre-
B
B
D
13
Assembly Model # 3AXCCON-08

Step 5
1. Attach 2 Bottom Support Legs G into pre-drilled holes of Bottom Panel F using
8 Phillips Screws 7 ( 4 Screws / each part ).
2. Use Phillips screwdriver to tighten Screws. Do not over-tighten.
B
14
Assembly Model # 3AXCCON-08

using Phillips Screws Round Head 5 .
2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
1. Attach ( left and right ) Lid Supports 8 into pre-drilled holes of Seat A and Divider E
Step 6
1. Attach Seat A to 3 Hinges on Back D using Phillips Screws 6
2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
( using guide holes underneath of Seat ).
Step 7
8
5
8
5
Lid Support-Left
Lid Support-Right
A
A
D
15
Assembly Model # 3AXCCON-08