Simpli Home ARTISAN 3AXCART-02 User manual

ARTISAN / HOLDEN / STRATFORD
BEDSIDE TABLE
MODEL # 3AXCART-02
1/14

2/14
FOR REPLACEMENT PARTS OR HELP WITH
ASSEMBLY PLEASE CONTACT US AT:
simpli-home.com/customer-support
PLEASE ENSURE TO HAVE THE MODEL #
INSTRUCTION BOOKLETFROM THE PACKAGING OR
TO RETURN THE PRODUCT:
PLEASE CONTACT THE RETAILER
WHERE THE ITEM WAS PURCHASED FROM

3/14
Upload an image of our furniture
in your home with a short review
to our facebook page for a chance to
ENTER
TO WIN
Win up to $3000 of
Simpli Home furniture!!!
www.facebook.com/simplihomefurnishings

4/14
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
A
PARTS DESCRIPTION
TOP
QTY 1
DRAWER FRONT
QTY 1
DRAWER BOTTOM
QTY 1
BACK PANEL
QTY 1 SET
DRAWER BACK
QTY 1
SIDE
QTY 1 PAIR
DRAWER SIDE
QTY 1 PAIR
SHELF
QTY 1
BOTTOM SHELF
QTY 1
B C
D
G
E
H
F
I
MODEL # 3AXCART-02
5/14
Front
Back

1
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
243
56
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
7
ALLEN KEY SCREW
M6 X 30 mm
QTY 4
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 13
HANDLE
M4 X 25 mm
QTY 1 SET
ALLEN KEY
QTY 1
CAM LOCK PIN
CAM LOCK
QTY 4 SETS
6/14
ALLEN KEY BOLT
M6 X 30 mm
QTY 8
WOOD DOWEL
Ø8 X 30 mm
QTY 6
MODEL # 3AXCART-02
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included

COMPONENTS – KEY DIAGRAM
7/14
MODEL # 3AXCART-02

ASSEMBLY
1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Drawer Front F .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides G .
3. Insert 2 Cam Locks 3 into pre-drilled holes on each Drawer Side G .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Drawer Bottom I firmly into slots on Drawer Sides G and Drawer Front F .
STEP 1
STEP 2
8/14
MODEL # 3AXCART-02

ASSEMBLY
1. Align Drawer Back H with Drawer Bottom I and press firmly into slot .
2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on
each Side G .
3. Use Allen Key 6 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Drawer Front F .
STEP 3
STEP 4
9/14
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCART-02

ASSEMBLY
STEP 5
1. Insert 6 Dowels 5 into pre-drilled holes on Shelf C .
2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Align pre-drilled holes on Sides D with Dowels 5 on Shelf C .
4. Attach Bottom Shelf B to Sides D using 4 Allen Key Bolts 1 ( 2 Bolts / each Side ).
5. Use Allen Key 6 to tighten bolts. Do not over-tighten.
10/14
MODEL # 3AXCART-02

ASSEMBLY
STEP 6
1. Attach Top A to Sides D using 4 Allen Key Bolts 1 ( 2 Bolts / each Side ).
2. Use Allen Key 6 to tighten bolts. Do not over-tighten.
11/14
MODEL # 3AXCART-02

ASSEMBLY
STEP 7
12/14
1. Attach Back Panel E to back frame of cabinet using Phillips Screws Round Head 7
through pre-drilled holes.
2. Use Phillips screwdriver to tighten screws.
STEP 8
1. Insert assembled drawers into glides on assembled table.
MODEL # 3AXCART-02

13/14
WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
simpli-home.com/customer-support.
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.

14/14
Question, problems, missing parts?
Before returning your product
please email Customer Support at
simpli-home.com/customer-support
or call
Customer Support at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
For more information visit us on our website
www.simpli-home.com
Like us on facebook
www.facebook.com/simplihomefurnishings