Sealey AP26059TC User manual

INSTRUCTIONS FOR:
TOPCHEST/ROLLCAB/MID-BOX
WITH BALL BEARING RUNNERS - BLUE
MODEL No's: AP26059TC/AP26479TC/AP26029TC
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using these units.
Locate the units in a suitable work area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING! Use the Rollcab on level and solid ground,
preferably concrete.
Keep the units clean and tidy in accordance with good
workshop practice.
Keep children and unauthorised persons away from the work
area.
DO NOT use these units for any purpose other than that
for which they are designed.
DO NOT use the units outdoors.
DO NOT place the units in a damp or wet location or an
area where there is condensation.
DO NOT clean the units with any solvents which may
damage the surfaces or the protective coating.
 DO NOT move the units with the drawers out. To avoid
tipping, open one drawer at a time and close and secure all
drawers whilst moving.
 DO NOT step on the drawers.
 DO NOToverload the drawers, weight limit per drawer is
36kg.
•All designed to take our modular tool trays.
•All heavy gauged steel construction and manufactured with
steel inner walls for extra strength and durability.
•Heavy-duty 45mm ball bearing drawer runners provide superior
performance and carry heavier loads.
• Fullheightrearlockingmechanism,locksfull-lengthdrawersin
multiple locations.
• Addedsecurityprovidedbytumblerlocks,suppliedwithtwo
folding keys.
• Rustandsolventresistantpowdercoatpaintnish.
• TherollcabisttedwithfourØ125mmrubberwheels,two 
 swivelcastorswithlargetoelocksandtwoxedwheels.
•Topchest features heavy-duty side handles.
• Rollcabfeaturesahigh,polishedchromehandleforcomfort
and control when manoeuvring.
• Rollcabsuppliedwitha6mmthicktopmattoprotecttop 
surface from scratching.
• Drawersfeaturestylishaluminiumdrawerpullsandnon-slip
liners.
Model No. AP26479TC AP26059TC AP26029TC
OverallSizeWxDxH(mm): 685x465x995mm 660x435x490mm 670x440x210mm
MediumDrawer(x5): 533x398x60mm 533x398x60mm (2x)533x398x60mm
LargeDrawer(x2): 533x398x160mm
Original Language Version AP26059TC,26479TC,26029TCIssue:1-15/07/15
© Jack Sealey Limited
AP26479TC
AP26059TC
AP26029TC
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION

4.1. These units are heavy, obtain the help of at least one other person before attempting to unpack them.
(AP26479TC)
4.2. Attach the wheels to the bottom of the rollcab using 4 bolts, washers and spacers (if supplied) per wheel.
Thebrakedswivelwheelsshouldbemountedonthesameendasthehandle(lefthandside,g.1).
4.3. Mountthesidemountedhandleontothecabinetandattachwith4boltsandwashers(g.3).
(All units)
4.4. AP26059TCorAP26029TCcanbeplacedontopofAP26479TC,alternativelyall3unitscanbeassembled  
together as in the picture below.
4.5. To remove a drawer with roller sliders, pull the drawer completely out, press down the left tab and lift up the right tab, pull
 drawerofftheslides(g.2).Toreinstallthedrawer,realignwiththeinternaldrawerslideandpushuntilitlocksinplace.
IMPORTANT: Toavoidtipping,openonedraweratatimeandcloseandsecurealldrawerswhilstmovingtherollcab/ 
units.
4.6. Periodically lubricate wheel axles and tighten all nuts and bolts.
Fig.1 Fig.2 Fig.3
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Partssupportisavailableforthisproduct.Toobtainalistingand/ordiagram,pleaselogonto:www.sealey.co.uk,
email:[e-mail]orphone:01284757500
5. ASSEMBLY
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guaranteeis12monthsfrompurchasedate,proofofwhichwillberequiredforanyclaim.
01284 757500
01284 703534
[e-mail]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP327AR
www.sealey.co.uk
Original Language Version
© Jack Sealey Limited AP26059TC,26479TC,26029TCIssue:1-15/07/15