Southern Enterprises EN724100TX User manual

1
EN724100TX Chicago Floating Shelf 24"-
Chocolate
EN724200TX Chicago Floating Shelf
24"-Black
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Max loading weight:20lbs

2
8
MAX
20lbs
capacity
Suggested tools as below list
Pencil Power drill Level
Bit 3/16” Tape measure
Chicago Floating Shelf 24"
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A Quantity
Of 1
Shelf
B Quantity
Of 1
Bracket
C Quantity
Of 5
Plastic anchor ¢6*30mm
D Quantity
Of 5
Screw ¢8*35mm
E Quantity
Of 2
Screw ¢8*40mm
F Quantity
Of 1
Levels
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call customer service at 1-800-633-5096 for
assistance, questions, or parts.
Assembly Tool Required
(Not Included)
8
4

3
Figure 1
Place mounting bracket (B)
against the wall at the desired
location with the arrow pointing
up on the.
Use a level on top of bracket to
insure bracket is level, then,
mark each hole with a pencil.
Remove the bracket.
Tip: If mounting to sheet rock
(cavity wall) it is advisable to
mount at least one screw
(without anchor) directly to a
wall stud.
Figure 2
Using a power drill and 1/4” drill
bit, drill a hole through the wall
at each marked hole location
where screw (D) will not hit a
stud in the wall.
Then insert plastic anchors (C)
into each hole and lightly tap
anchors (C) with a hammer until
they are securely flush with the
face of the wall. After the plastic
anchors(C) are securely in
place, position bracket (B) to be
mounted to the wall. Using a
philips screwdriver, drive in the
screws (D) into plastic anchors
(C) until the bracket (B) is
securely placed on the wall.
C
hicago
F
loating
S
helf
24"
Assembly Instructions

4
Figure 3
Slide shelf (A) onto the
mounting bracket (B) by aligning
the two holes on shelf (A) to the
poles on bracket (B), making
sure the two small holes are
pointing down on the bottom of
shelf (A).
Figure 4
Insert the two long screws (E)
with a screwdriver to secure
shelf (A) to bracket (B).
Place level on top to insure
product is level.
Now you shelf is ready to use.
Now you shelf is ready to use

5
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at servic[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form

6
CAUTION
Max shelf load capacity is achieved by mounting screw into studs or cement
walls
If mounting to sheet rock(cavity wall) it is advisable to mount at least screws
(without anchor) directly to a wall stud or studs. However do not leave either end of
mounting bracket unsupported by at least one anchor. For hollow wall mounting you can
use any of the holes in the back plate to suit where you require the mounting screws
positioned.
Note : Pipe bracket has a built in safety design feature Pipes have a slight
upward angle to prevent floating shelf from fogging when shelf is loaded
Weight ratings are E D L (evenly distributed load)