Simpli Home AXCRAMH15-LGB User manual

AMHERST / HALIFAX / WASHINGTON
MEDIUM STORAGE CABINET
MODEL # AXCR B AMH15-LG
1/21
SI
M
P
I
I
HOME
L I F E B Y D E S I G N

2/21
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/21
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/21
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # AXCRAMH15-LGB
A
PARTS DESCRIPTION
5/21
TOP
QTY 1
LEFT SIDE
QTY 1
BOTTOM SHELF
QTY 1
CENTRE SUPPORT
QTY 1
DOOR
QTY 1
BC
DEF
GL
RIGHT SIDE
QTY 1
LEFT BACK PANEL
QTY 1
GR
RIGHT BACK PANEL
QTY 1
SHELF
QTY 2
H
Front /
Avant
Front
/ Avant
F
r
on
t /
Ava
n
t
Fro
n
t /
A
v
a
nt
F
ro
n
t / Avant
Warning Label

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # AXCRAMH15-LGB
PARTS DESCRIPTION
6/21
I
DRAWER FRONT
QTY 4
LEFT DRAWER SIDE
QTY 4
JL
RIGHT DRAWER SIDE
QTY 4
JR
DRAWER BACK
QTY 4
K
DRAWER BOTTOM
QTY 4
L

HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
7/21
123
4 5 6
7 8 9
10 11
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
MAGNET AND PLATE
QTY 1 SET
ADJUSTABLE HINGE
QTY 2
PHILLIPS SCREW ROUND HEAD
M4 X 15 mm
QTY 17
HANDLE
QTY 5 SETS
CAM LOCK PIN
CAM LOCK
QTY 22 SETS
ALLEN KEY SCREW
M6 X 30 mm
QTY 28
ALLEN KEY
QTY 1
SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 15 mm
QTY 4
PHILLIPS SCREW
M4 X 15 mm
QTY 12
PRE-ASSEMBLY INFORMATION
MODEL # AXCRAMH15-LGB
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1
FURNITURE TIP OVER RESTRAINT
QTY 1 SET

COMPONENTS – KEY DIAGRAM
A
GR
B
C
E
D
F
H
H
KJR
JL
LI
MODEL # AXCRAMH15-LGB
8/21
GL
Front
/
Avant
Front
/ Avant
Front / Avant
Front / Avant
Front / Avant

ASSEMBLY
STEP 1
1. Slide Drawer Bottom L firmly into slots on Drawer Sides JL , JR and
Drawer Front I .
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front I .
2. Align Cam Lock Pins with guide holes and attach Drawer Sides JL , JR .
3. Insert 2 Cam Lock 2 into guide holes on each Drawer Side JL , JR .
4. Use flathead screwdriver to secure Cam Locks.
2
JR
JL
I
I
JR
JL
L
MODEL # AXCRAMH15-LGB
9/21

ASSEMBLY
STEP 3
STEP 4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front I .
Repeat Step 1-4 for the other drawers.
1. Align Drawer Back K with Drawer Bottom L and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen Key 3 to tighten Screws. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
I
JR
JL
L
K
1
3
I
4
MODEL # AXCRAMH15-LGB
10/21

ASSEMBLY
STEP 5
11/21
1. Attach Centre Support E to Bottom Shelf D using Allen Key Screws 1 through
guide holes.
2. Use Allen Key 3 to tighten Screws. Do not over tighten.
STEP 6
1. Attach Cam Lock Pins 2 into pre-drilled holes on each Side B , C .
2. Align and insert Cam Lock Pins 2 into guide holes on Bottom Shelf D .
3. Insert Cam Locks 2 into guide holes in Bottom Shelf D .
4. Once in place tighten Cam Locks 2 using a flathead screwdriver.
E
D
1
3
2
C
E
B
D
MODEL # AXCRAMH15-LGB
Front / Avant
Front / Avant
Front
/ Avant
Front
/
Avant
Front /
Avant
Front / Avant

ASSEMBLY
STEP 7
1. Attach Top A to Sides B , C using Allen Key Screws 1 .
2. Attach Top A to Centre Support Shelf E using Allen Key 1 .
Tighten the Centre Support Shelf to pre-drill hole at the right side support bar
underneath of top.
3. Use Allen Key 3 to tighten Screws. Do not over-tighten.
MODEL # AXCRAMH15-LGB
12/21
B
C
E
D
A
A
E
3
1
Front Side
A
3
1
Front
/
Avant
Front
/
Avant
Front
/
Avant
Front / Avant
Front
/
Avant

ASSEMBLY
STEP 8
1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round
Head 5 into guide holes.
2. Use Phillips screwdriver to tighten screws.
MODEL # AXCRAMH15-LGB
13/21
NOTE:
The triangle ruler
is not included in
the hardware pack.
Adjust the cabinet frame before assembling the back panels.
STEP 9
90°
90°
90°
90°
Triangle ruler
90°
90°
90°
90°
Front
/ Avant
GL
GR
Warning Label
5
F
r
on
t
/
A
vant

ASSEMBLY
STEP 10
F
6
10
1. Attach Adjustable Hinges 6 to Door F using Phillips Screws 10 into pre-drilled holes
on Door F .
2. Attach Adjustable Hinges on Door F to Side C using Phillips Screws 10 into pre-drilled
holes on Side C .
3. Use a Phillips screwdriver to tighten screws.
6
10
A
B
CF
MODEL # AXCRAMH15-LGB
14/21
Front / Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant

ASSEMBLY
IMPORTANT NOTE:
II
I
10
Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so
that all the spaces between the door and the unit sides are equal. To adjust, follow
instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 10 , adjust door to desired position, re-tighten screw .
MODEL # AXCRAMH15-LGB
15/21

ASSEMBLY
STEP 11
1. Attach Magnet Plate 7 to bottom corner of Door F using Phillips Screws 9 into
pre-drilled holes on Door F .
2. Attach Magnet 7 using Phillips Screws 9 into pre-drilled holes on Bottom Shelf D .
3. Use a Phillips Screwdriver to attach Handle 4 to Door F .
A
B
D
C
E
F4
9
7
9
7
MODEL # AXCRAMH15-LGB
16/21

ASSEMBLY
MODEL # AXCRAMH15-LGB
17/21
STEP 12
shelf level 1
shelf level 2
shelf level 3
shelf support
anti - tipping
8
8
F
H
H
H
1. Use 4 Shelf Supports 8 for each Cabinet Shelf H in desired location.
2. 2 Shelf Supports 8 may be used on back top of each Cabinet Shelf H as
a tipping restraint

ASSEMBLY
STEP 13
1. Insert assembled drawers into glides on assembled Medium Storage Cabinet.
MODEL # AXCRAMH15-LGB
18/21

STEP 14
11
11
19/21
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY

20/21
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
Bring both ends together and slide the smooth side upright
through the square-shaped end and pull through to create the
“locked” position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
● DO NOT put a TV or other heavy objects on top of a Storage Cabinet
or any other furniture not intended for use with a TV
● DO NOT place heavy objects in top drawers
● DO NOT let children climb or hang on drawers, doors or shelves
Furniture Tip Over Restraint Instructions:
x
x
FURNITURE TIP OVER RESTRAINT ASSEMBLY