Simpli Home WyndenHall brooklyn + max AXCART15-WH User manual

ARTISAN / HOLDEN / STRATFORD
MEDIUM STORAGE CABINET
MODEL # AXCART15-WH
/191
TM
TM
SI
M P
HOME®
LIFE BY DESIG N

/192
TM
TM
SI
M P
HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

/193
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

/194
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCART15-WH
/195
.A
.E
TOP
QTY 1 RIGHT SIDE
QTY 1
.
R
B
CENTRE SUPPORT
QTY 1
.
LD. RD
LEFT DOOR
QTY 1 RIGHT DOOR QTY 1
BOTTOM SHELF
QTY 1
.
LG
CABINET SHELF
QTY 4 LEFT BACK PANEL QTY 1
LEFT SIDE
QTY 1
.
L
B
.C
.F
.
R
G
RIGHT BACK PANEL
QTY 1
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
WarningLabel

PRE-ASSEMBLY INFORMATION MODEL # AXCART15-WH
/196
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
.1.2
.4
.3
.7.8.9
.5.6
.10
ALLEN KEY SCREW
M6 X 30mm
QTY 9 ALLEN KEY
QTY 1
PHILLIPS SCREW ROUND HEAD
M4 X 15mm
QTY 23
MAGNET AND PLATE
QTY 2 SETS SHELF SUPPORT
QTY 24
PHILLIPS SCREW
M3 X 12mm
QTY 12
PHILLIPS SCREW
M3 X 15mm
QTY 8
WOOD DOWEL
Ø8 X 30mm
QTY 4
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
.11
CAM LOCK PIN
CAM LOCK
QTY 9 SETS
HANDLE
M4 X 30 mm
QTY 2 SETS

COMPONENTS-KEY DIAGRAM MODEL # AXCART15-WH
/197
A
B L
B R
C
E
FF
FF
G R
G L
D
L
D R
Front/ Avant
Front/ Avant
Front/
Avant
Front/ Avant
Front/
Avant

STEP-1
ASSEMBLY MODEL # AXCART15-WH
/198
P
X
1. Attach three Cam Lock Pins 2 into pre-drilled holes on each Side BL,BR .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
Front/
Avant
Front/
Avant
B R
Front/
Avant
Front/
Avant
B L
B R B L
2
2 2
E
E
Front/
Avant
Front/
Avant
1. Insert four Dowels 10 into guide holes on Bottom Shelf E .
2. Use rubber mallet to tap Dowels 10 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
10
10
10

STEP-2
ASSEMBLY MODEL # AXCART15-WH
/199
1. Align Cam Lock Pins and Wood Dowels with guide holes and attach Bottom Shelf E
to Left Side BL .
2. Insert three Cam Locks 2 into guide holes on Bottom Shelf E .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
2
2
B L
B L
B L
E
E
E
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant

STEP-3
ASSEMBLY MODEL # AXCART15-WH
/1910
1. Repeat Step-2 for the Right Side BR .
B L
B R
B L
B
R
E
E
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
2
2

STEP-4
ASSEMBLY MODEL # AXCART15-WH
/1911
1. Attach Centre Support C to Bottom Shelf E using three Allen Key Screws 1
through guide holes.
2. Use Allen Key 3 to tighten Screws. Do not over-tighten.
1
B L
B R
E
B L
B R
E
C
C
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
1
3

STEP-5
ASSEMBLY MODEL # AXCART15-WH
/1912
P
X
A
A
2
Front/
Avant
Front/
Avant
2
1. Attach three Cam Lock Pins 2 into pre-drilled holes on Top A .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.

ASSEMBLY MODEL # AXCART15-WH
/1913
STEP-6
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
4. Use three Allen Key Screws 1 to attach each Sides BL , BR through guide holes
from each Sides BL , BR to pre-drilled holes of Top A .
5. Use Allen Key 3 to tighten Screws. Do not over-tighten.
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
2
1. Align Cam Lock Pins with guide holes on Centre Support C and attach Top A .
2. Insert three Cam Locks 2 into guide holes on Centre Support C .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
Front/
Avant
AA
B L
B L
B
L
B L
B
L
B R
B R
B R
B R
B R
C
C
C
CC
EE
E
E
E
A
AA
2
1
1

ASSEMBLY MODEL # AXCART15-WH
/1914
STEP-7
1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round Head 5
through guide holes.
2. Use Phillips Screwdriver to tighten screws.
NOTE:
The triangle ruler
is not included in
the hardware pack.
Adjust the cabinet frame before assembling the back panels.
STEP-8
Triangle ruler
90°
90°
90°
90°
90°
90°
90°
90°
Note:
Thebackofthecabinetframedoesnothave
pre-drilledholestoattachthebackpanels.
G R
G L
7
Front/
Avant
Front/
Avant
Warning Label

ASSEMBLY MODEL # AXCART15-WH
/1915
STEP-9
2.AttachMagnetPlates8tobottomcornerofDoorsDL,DRusingPhillipsScrews6into
pre-drilledholesonDoorsDL,DR.
3.AttachMagnets8usingPhillipsScrews6intopre-drilledholesonBottomShelfE.
4.UsePhillipsscrewdrivertoattachHandles4toDoorsDL,DRthroughguidehole.
A
B L
B R
C
E
D L
D R
1.AttachhingesonDoorsDL,DRtoSidesBL,BRusingPhillipsScrews5intopre-drillholes:
- UsingPhillipsscrewdrivertoattachScrews5atmiddleholeofhingesfor
bothtop&bottomhinges.
-Adjustthedoortoensuretheyarealignedstraight&squarewithbottomshelf&side.
-UsingPhillipsscrewdrivertotightentherestofscrews5intopre-drillholes
(top&bottomholesonhinges).
B L
B R
C
E
D L
D R
4
6
8
6
First Step
Last Step ( after adjust the door )
5
5
5

ASSEMBLY MODEL # AXCART15-WH
/1916
STEP-10
shelf level 3
shelf level 2
shelf level 1
1.UsefourShelfSupports9forofeachCabinetShelfFindesiredlocation.
2.TwoShelfSupports9maybeusedonbacktopofeachCabinetShelfFasa
tippingrestraint .
shelf support
anti - tipping
9
9
F
F
F

/1917
STEP-11
FURNITURE TIP OVER RESTRAINT ASSEMBLY
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
11
11
Warning Label

/1918
FURNITURE TIP OVER RESTRAINT ASSEMBLY
Furniture Tip Over Restraint Instructions:
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
Bring both ends together and slide the smooth side upright
through the square-shaped end and pull through to create the
“locked” position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
·DO NOT put a TV or other heavy objects on top of a chest of
drawers or any other furniture not intended for use with a TV
·DO NOT place heavy objects in top drawers
·DO NOT let children climb or hang on drawers, doors or shelves
Px
P
P
x
x

/1919
TM
TM
SI
M P
HOME®
LIFE BY DESIG N
WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
[email protected].
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.